PRIJAVI SE
in sodeluj na forumu, komentiraj, ocenjuj... Registriraš se v samo 10ih sekudah!
Bitcoin Slovenija
 

Zadnja sporočila


Pes :: 13.04.2020 ob 21:52
Forager is an advanced open source multi-pool / multi-algo profit switching miner

It will use profit information from supporting pools to make sure you mine the most profitable algorithm at all times.
You can also use WhatToMine and CoinCalculators virtual pools for profit data and mine to pools which dont provide profit information, or even your custom pools.

Using integration with MSI Afterburner, it will get real time power usage and use this information to calculate how much you pay and adjust the profitability data.


Latest versions:
20.04 - 5/04/2020
20.01 - 5/01/2020
19.07 - 27/07/2019
19.06 - 3/06/2019
19.05 - 9/05/2019

Main features:
- Supports AMD/NVIDIA/CPU Mining
- Mine single coin or algo or Automatic profit switching on Zpool, Zergpool, NiceHash, MiningPoolHub and others
- Profitability info for all coins on WhatToMine and CoinCalculators
- MSI Afterburner integration for monitoring AMD/NVIDIA/Intel CPU power consumption and PowerLimit support for AMD/NVIDIA
- Fast benchmarking (Most algos hashrate stabilize and finish within 2-3mins)
- GPU Activity watchdog + Hashrate watchdog
- Reporting mining stats to multipoolminer.io/monitor/
- Power usage approximation for AMD and CPU when Afterburner integration is off
- Profit display in any fiat currency which is supported by CoinDesk
- SHA256 checksum validation for miner downloads

Releases:
[Forager] v20.04

Option 2:
Download latest Forager release (7zip or self-extracting SFX) and extract

Configure:
Copy Config-SAMPLE.ini to Config.ini and Edit it with your preferred currencies, wallets and pool users
See Autostart.bat files for launch examples

Upgrade:
Option 1:
Remove all files except your customized Autostart.bat, Config.ini and Stats folder
Download latest Forager release (7zip or self-extracting SFX) and extract

Option 2 (if initially installed using GIT):
run "git pull" in Forager folder to get latest master version


Miner list:
Total of 70+ miners, too long to list here
If you want a specific miner - I probably have it already

Pool list:
AhashPool
Bilbotel
BlazePool
BlockMasters
BsodPw
FairPool
HashRefinery
MiningDutch
MiningPoolHub
NanoPool
NiceHash
NLPool
PhiPhiPool
ProtoPool
SuprNova
UniMining
WhatToMine
YIIMP
ZergPool
Zpool


Notes:

- Recommended drivers for AMD - 18.3.4/18.6.1.
you can use to easily find and download specific driver version

- Recommended drivers for NVIDIA on Win 10 - 411.31+ for CUDA 10.
- Recommended drivers for NVIDIA on Win 10 - 398.+ for CUDA 9.2
- Recommended drivers for NVIDIA on Win 7 - 390.65-391.01

- Latest PowerShell core recommended for compatibility/performance

- Windows 7 will require PowerShell v5 or PowerShell Core installed
- Recommended MSI Afterburner version is 4.5.0 or newer
prior versions don't support Intel CPU power usage and may not fully support your GPU

- Avermore and Sgminer X16r/X16s (AMD) during benchmarking submit "fake" shares that get rejected by the pools.
Ignore this and after benchmarking it will work normally.

- XMR-Stak (AMD and NVIDIA) doesn't support multiple groups per GPU Vendor (2+ AMD or NVIDIA) out of the box.
Of first run it will create "GroupName-Algorithm.txt" files for each group that you can edit once to include only the relevant GPUs.


Mixed rigs (AMD+NVIDIA) may have problems selecting specific devices. Use at your own risk.

poslano v temi :: [Forager] v20.04 - Profit switching miner (AMD/NVIDIA/CPU) Windows/Linux!
JMoriarty :: 13.04.2020 ob 14:25
♔ MORIARTY II ♔ Update

Hello dear forum users!

A new update is being released in the Moriarty project, which affects not only the design, but also the security and convenience of the whole project. Also there have been realized a whole internal "eco-system" of Ethereum cryptocurrency in that update.

Due to this, each player will have a more extensive investor functionality. The openness of the project will become even more convenient and the game dynamics and cash movements of players can be tracked directly in the project and in your own personal account.

This release untie the hands for the introduction and adaptation of new games, based on the already known "CrashLine". The line between the main project and the mini games will become more flexible. And new types of games and lotteries await all participants in future updates.

Also the Ethereum-based Eco-System will allow all players and in particular daily reinvestment fans to save on commissions on the Etherscan network, which will make it possible to raise Xs more actively than before.

And the main breakthrough is the complete independence of the project from a number of external Ethereum factors. The code written by experts becomes easier to understand, which gives Moriarty great potential for developing and integrating more and more new features directly online.

We also didn't ignore the project design. In particular, there were added some elements which will increase usability and give the game additional dynamics.

And in conclusion: they say the best is the enemy of the good. In fact, the “best” and the “good” are two sides of the same coin. And it's name - "Moriarty".

Have a nice and profitable game!
Sincerely, Moriarty’s team.

poslano v temi :: New BlockChain Moriarty game on Smart Contract
Pes :: 11.04.2020 ob 20:47
Bminer is a highly optimized cryptocurrency miner that runs on modern AMD/NVIDIA GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above). Bminer is one of the fastest publicly available miners today -- we use various techniques including tiling and pipelining to realize the full potentials of the hardware.

Bminer also comes with REST APIs to facilitate production deployments (e.g., mining farms).
Bminer supports mining Equihash-based coins (e.g., Zcash) with 2% of devfee.
Bminer supports mining Zhash / Equihash 144,5 based coins (e.g. BitcoinGold, BitcoinZ) with 2% of devfee.
Bminer supports mining Ethash-based coins (e.g., Ethereum) with 0.65% of devfee.
Bminer also supports dual mining mode - mining Ethash-based coins (e.g. Ethereum) and Blake14r-based coins (e.g. Decred) / Blake2s-based coins (e.g. Verge) at the same time. Devfee for the dual mining mode is 1.3%, and the second coin (e.g. Decred/Verge) is mined without devfee.
Bminer supports mining Tensority-based coins (e.g., Bytom(BTM)) with 2% of devfee.


Features

Fast

Grin31 mining on stock settings
2.60 G/s on RTX 2080Ti
1.65 G/s on RTX 2080
1.55 G/s on GTX 1080Ti
0.95 G/s on GTX 1070

Bminer 16.0.6 Grin29m mining on stock settings
8.32 G/s on GTX 2080Ti
5.18 G/s on GTX 2070
3.96 G/s on 2060
2.18 G/s on 1060
3.34 G/s on 1070
5.03 G/s on 1080ti
3.00 G/s on P104-4G
3.56 G/s on P104-8G
4.95 G/s on P102-10G

AE mining on stock settings:
11.8 Sol/s on GTX 2080Ti
8.90 Sol/s on GTX 2080
7.40 Sol/s on GTX 1080Ti
4.7 Sol/s on GTX 1070
3.4 Sol/s on GTX 1060 6G


Beam mining on stock settings
30 Sol/s on GTX 1080Ti
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

Equihash mining on stock settings
735-745 Sol/s on GTX 1080Ti
450-460 Sol/s on GTX 1070
315-325 Sol/s on GTX 1060
Equihash 144,5 (Zhash) mining on stock settings
61 Sol/s on GTX 1080Ti
25 Sol/s on GTX 1060
Ethash mining on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill: 46.7 MH/s
Without OhGodAnETHlargementPill: 32.2 MH/s
Dual mining using automatic tuning (default) on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill:
ETH 46 MH/s and DCR 1000 MH/s
ETH 46 MH/s and XVG 1770 MH/s
Without OhGodAnETHlargementPill:
ETH 32 MH/s and DCR 2200 MH/s
ETH 32 MH/s and XVG 3750 MH/s
Bytom mining on stock settings:
4650 H/s on GTX 1080Ti
2850 H/s on GTX 1070
1800 H/s on GTX 1060 6G

Secure and reliable

SSL support
Automatic reconnects to recover from transient network failures
Automatic restarts if GPUs hang

Operation friendly

Comes with REST APIs to facilitate production deployments


Quickstart

Download and extract Bminer into a folder (e.g. C:bminer or /home/bminer)
Depending on the coins that you want to mine, find the corresponding script in the folder. For example, the corresponding script is mine_grin29.bat (on Windows) or mine_grin29.sh (on Linux) when mining Grin using the Cuckaroo29 algorithm.
Change the address and account information in the script.
Run the script and Enjoy mining


Downloads

Windows x64: bminer-v16.1.0-f55fff0-amd64.rar
Windows x64: bminer-lite-v16.1.0-f55fff0-amd64.rar

Release notes

16.1.0(Current)
Fix fidelity issues on Cuckaroo29m.
Support for BFC and Cuckatoo32.
Improve the stability of ETH mining.


16.0.7
Retire the supports for XVG, DCR, and VBK.
Initial support for mining Ethash as well as dual mining Ethash and Handshake on AMD platforms.


16.0.6
Improve the performance of Cuckaroo29m miner.
Fix the regression that the Cuckatoo / Cuckoo miners failed to start.
Fix the performance regression of Cuckaroo29m under Windows.
Fix the compatbility issues on Windows system.



16.0.5
Improve the performance of Cuckaroo29m miner.


16.0.4
Improve the performance of Cuckaroo29m miner.
Reduce the rejection rate of the Cuckaroo29m miner.


16.0.3 (Current)
Improve performance and stability of the Cuckaroo29m miner.
Fix fidelity issues of the Cuckaroo29m miner.

16.0.2
Performance improvement on the Cuckaroo29m miner.

16.0.1
Fix the Cuckaroo29m miner fails to start on Turing-based cards or cards that have only 4G memory.
Fix the Cuckaroo29m miner submits shares that have low difficulty.
Performance improvement on the Cuckaroo29m miner.

16.0.0
Initial support for the Cuckaroo29m algorithm.


15.8.7
Improve the performance of Beam bminer for RTX cards.
Experimental support for dual-mining Ethash and the Eaglesong algorithm.

15.8.6
Improve the performance of automatic tuning of dual mining parameters.

15.8.5
Add an API to stop the miner.

15.8.4
Improve the performance of BeamHashII algorithm on RTX cards.

15.8.3
Improve the performance of BeamHashII algorithm.

15.8.2(Current)
Fix the regression on the BeamHashII fails to start on GTX 2060.

15.8.1
Support for the BeamHashII algorithm.

15.7.6
Fix the regression that the Cuckaroo29d miner fails to start on RTX-series cards.

15.7.5
Improve the performance of the miner of Cuckatoo31.
Increase the dynamic ranges of -intensity for older machines to fully utilize the GPUs (at the cost of a slight performance loss).

15.7.4
Improve the performance of Cuckaroo29d / Aeternity.
Support 4GB cards for Cuckaroo29d.
Fix the regression that the Cuckaroo29d miner fails to start on Windows.

15.7.3
Improve the performance of the Cuckaroo29d miner.

15.7.2
Improve the stability of the Cuckaroo29d miner.
Reduce the CPU usage of Cuckaroo29d miner.
Support 5GB cards for Cuckaroo29d.

15.7.1
Improve the performance of the Cuckaroo29d algorithm.
Fix the issue that the Cuckaroo29d failed to start for Turing-based cards.

15.7.0
Support the cuckaroo29d algorithm

15.5.3
Fix invalid shares ETH + VBK when using multiple cards.

15.5.1
Fix the regression that Cuckaroo29 fails to work on Turing cards.
Significantly improve the performance of ETH / VBK dual mine.

15.5.0
Improve the performance of the Cuckatoo algorithm.
Support dual-mining ETH and VBK.
Add the parameter -version to output the version and exit.


15.4.0
Improve performance of Cuckaroo29 / Aeternity.
Improve compatibility on Windows
Add an experimental flag --fast to improve the performance for Cuckaroo29 / Aeternity, but it might lead to unstability on some systems

15.3.1
Slightly improve performance of Cuckaroo29 / Cuckatoo31.
Reduce CPU usages of Cuckatoo31.
Fix the regressions of Cuckaroo29 on RTX cards.
Fix the incorrect reportings of Ethash speed to the mining pools.

15.3.0
Improve the performance of Cuckaroo29 by 5%.
Slightly improve the performance of Cuckatoo31.
Improve compatibility on Windows.

15.2.0
Improve performance and stability of Cuckatoo31.
Slightly improved performance of Ccukaroo29.
Reduced the chance of reject and stale shares of CC29/CC31.
Support RTX 2080/2070 for Cuckatoo31. RTX 2080 expected speed 1.45G/s.

15.1.0
Improve performance of Cuckaroo29 / Cuckatoo31.
Experimental support Cuckaroo29 on AMD cards (ROCM only)
Improve compatibility on Windows.
Fix the regression on UI dashboard.
Reduce reject rate of Cuckaroo29 / Cuckatoo31.

15.0.2
Improve the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

15.0.1
Fix compatibility issues on Windows.

15.0.0
Support 8G cards for Cuckatoo31 (except for Windows 10).
Improve stability of the Cuckatoo31 solver.

14.3.1
Improve the performance of Cuckaroo29.
Reduce the likelihood of rejected shares of Cuckatoo31.
Support Nicehash for both Cuckaroo29 / Cuckatoo31.

14.3.0
Improve the performance for Cuckatoo31.
Support 2080Ti for Cuckatoo31.
Reduce the CPU usages for Grin / Aeternity by default.
Reduce the likelihood of rejected shares for Cuckatoo31.

14.2.0
Experimental support for Cuckatoo31 on 1080Ti.
Fix the regression where ETH dual mine fails to start on Windows.
Improve performance on mining Aeternity.
Support tweaking the CPU usage for mining AE / Grin with the -intensity flag.

14.1.0
Improve performance of AE / Grin on Turing cards.
Improve performance of AE / Grin on lower-end CPUs and Windows platforms.
Support mining beam on leafpool and nicehash.
Fix the regression where /api/v1/devices is occasionally unresponsive.

14.0.0
Improved Grin/AE mining speed.
Print fidelity information. It is a measure of the luck/miner correctness. Overtime, the number should be close to one. For miners running over two hours, the fidelity should be at least greater than 0.95.
Improved multi-card performance on Windows.
Improved the miner fidelity by 8%-10%. You will not see big local difference but you will see roughly 10% higher speed on the pool side.
Reduced reject chance.
Fixed equihash issue.
Fix the regression that the equihash miner fails to start on Windows.

13.2.0

Improve the performance of Turing GPUs when mining Grin.
Reduced rejected share chance for all cards.

13.1.0

Support mining Grin / AE with 4G or 5G of video memory. (P104 only on Linux).

13.0.0

30% performance improvement on Grin and AE.
Reduce the likelihood of rejected shares.

12.2.0

Optimize CPU usage.
Fix compatibility issues with grin-pool.org and grinmint.com.
Experimental support for Turing GPUs.
Allow bminer to run with older NVIDIA drivers.

12.1.0

50% performance improvement on Aeternity.
10% performance improvement on Grin.
Support 8GB cards on Windows 10.
Support SSL connections for Grin.

12.0.1

Experimental support mining Grin on NVIDIA GPUs. Currently bminer only supports the Cuckaroo29 algorithm.
100% performance improvement on the beam miner on NVIDIA GPUs compared to 11.4.1.
Bug fixes
11.4.1

Support AMD Crimson driver mining beam
11.4.0

Experimental support mining beam with AMD cards

11.3.0

Improve the performance of Aeternity for 6GB cards
Support mining beam over beepool
Output solution/s instead of nounce/s when mining beam

11.2.0

Experimental support for Beam.

11.1.0

Experimental support for Aeternity.

11.0.0

Support ETH/BTM dual mine.

10.7.0

Fix `-devices value` option bug in 10.6.0.
Fix a bug in `GET /api/v1/status/device` api.

10.6.0

Require CUDA 9.2 or above for this version.
Substantially increase BTM mining speed, e.g. 4650H/s on 1080Ti now.

10.5.0

Require CUDA 9.2 or above for this version.
Substantially increase BTM mining speed, e.g. 4500H/s on 1080Ti now.
Maximum temperature is monitored more precisely.
Support BTG mining on zhash.pro pool.


10.4.0

Add `-pers auto` option to support pools (e.g. zergpool.com) to automatically switch personalization string for equihash144,5 mining.

10.3.0

Make API robust and accessible even when GPUs are hung.
Support ethproxy protocol pools, such as dwarfpool, to display worker names.

10.2.0

Support all the other Equihash 144,5 based coins besides BTG, using equihash1445 scheme and -pers config.

10.1.0

Fix performance regression in BTM mining.

10.0.0

Support mining Zhash (Equihash with parameter set 144,5) based coins.
Substantially increase BTM mining speed again (up to another 30%).
Support reported hashrate feature on ETH pools.

9.1.0

Substantially increase BTM mining speed (up to 30%).
Fix editing problems of .bat files on windows.
Add scheme suggestions in scripts for ETH mining.

9.0.0

Experimental support for mining Bytom (BTM).
Optimize the performance of automatic tuning in dual mining mode.
Start REST APIs much faster than previous versions.
Improve compatibility of mining Ethereum on Nicehash pool.

8.0.0

Support a dual mining mode for Ethereum (ETH, Ethash) and Decred (DCR, blake14r) / Verge (XVG, blake2s) without affecting Ethereum mining performance.
Automatically tune mining performance in dual mining mode.
Support dual mining mode in launcher and dashboard GUI.
Add scripts to download third party software OhGodAnETHlargementPill to improve Ethereum mining performance on GTX 1080/1080Ti.
Introduce new REST APIs to display stratum/solver/device status.

7.0.0

Experimental support for mining Ethereum.
Various usability improvements on the launcher GUI.
Create a lite distribution without the launcher GUI.

6.1.0

Fix potential regression caused by 6.0.0 for GPUs mounting on risers.
Improve mining algorithm stability.

6.0.0

Failover server supports. Supply multiple uris (separated by commas) via the -uri option to enable the failover support.
A launcher GUI for Windows.
Reduce reject rate caused by stale shares.
0.3-0.5% performance improvement depending on card models.
Fix inaccurate metrics at the start of Bminer.
Reduce CPU usage the start of bminer.
Support miner.reconnect().
Experimental support for miningrigrentals.
A new option -no-runtime-info to disable runtime information collection.

5.5.0

Show the fan speed in both console and UI.
Fix compatibility issues for pool.miningspeed.com.
Fix a bug that causes Bminer fails to start on Windows under some configuration.

5.4.0

Fix a reconnection issue in the network layer.
Show additional statistics in console.
Allow cross-domain requests to access the API.
Fix the compatibility issue with docker.
Introduce the option `-share-check` to make the time of recovering from no accepted shares configurable.

5.3.0

Experimental support for EthOS / Ubuntu 14.04.
Support AMD K10 CPUs.
Automatically restart hanged network connections.
Improve compatibilities with mining rigs with more than 8 cards.

5.2.0

Introduced the option -logfile to append the logs into a file.
Minor optimization on Windows for cards that are mounted on the risers.
Improve compatibility for NiceHash.

5.1.0

Support NiceHash.
Fix unstable network connections in 5.0.0.
Fix performance regressions for 1080Ti under Linux.

5.0.0

Minor performance improvement for GTX 1060.
Fixed performance regressions in 4.0.0 on Windows.
Optimization on the networking layer.
Show GPU ID in case of hardware errors.
Introduced the option -no-timestamps which suppresses the timestamps in the logging messages.

4.0.0

Minor performance improvement.
Support older CPUs like Core 2 Duo.
Support mining rigs that have more than 8 GPUs.
Support luckpool.org.
Removed the polling option.
Introduced the option `-max-network-failures` which allows Bminer to exit after consecutive network failures.
Various improvement on the UI.
Localization for Russian and Chinese.

3.0.0

Minor performance improvement.
Disable CPU polling by default.
Introduce a Web-based dashboard.
Support slushpool.

2.1.0

Add the -polling option to make GPU polling configurable.
Disabling polling reduces the CPU usage but it might reduce the performance in some configurations.
Improve the stability of the network connections.
First public release for Linux.

2.0.0

First public release.

poslano v temi :: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29m miner for AMD/NVIDIA GPUs 16.1.0
Pes :: 09.04.2020 ob 19:32


NBMiner


GPU Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB.


Download


Download From Mega Release: NBMiner v29.1


Performance (stock frequency)
Code: http://api_hostort/ in your browser to use web monitor.
Default: http://127.0.0.1:22333

Features

Support Windows & Linux.
Support backup mining pool configuration.
Support SSL connection to mining pools.

Dev Fee

tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%
hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%


Performance (stock frequency)

Code:
| Algorithm | Coin | P106-100 | P104-8G | 1070ti | 1080ti | 2080 | RX580 2048sp |
| :--------------- | :-----: | :--------: | :--------: | :--------: | :------: | :------: | :----------: |
| tensority | BTM | 1,900 | 3000 | 3,400 | 5,000 | 11,500 | X |
| ethash | ETH | 21.2M | 34.5M | 26.9M | 46M | 35.5M | X |
| tensority_ethash | BTM+ETH | 950+15.5M | 1600+26.5M | 1350+22M | 2450+40M | 7000+28M | X |
| cuckaroo | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| cuckarood | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 9.1 | X |
| cuckatoo | GRIN31 | - | 0.89 | 0.94 | 1.56 | 1.65 | X |
| cuckoo_ae | AE | 3.35 | 5.5 | 5.15 | 7.9 | 8.75 | X |
| cuckaroo_swap | SWAP | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| progpow_sero | SERO | 10.3M | 17.5M | 13.3M | 22.5M | 25.8M | 10M |
| sipc | SIPC | 600k | 940k | 780k | 1170k | 1050k | X |
| eaglesong | CKB | 430M | 640M | 740M | 1150M | 1160M | 350M |
| eaglesong_ethash | CKB+ETH | 203M+20.5M | 275M+34M | 415M+26.5M | 600M+44M | 790M+36M | 200M+22M |
| bfc | BFC | 80 | 130 | 120 | 190 | 210 | X |
| hns | HNS | 170M | 255M | 300M | 455M | 425M | 145M |
| hns_ethash | HNS+ETH | 76M+19M | 120M+30M | 158M+26.2M | 176M+44M | 305M+34M | 68M+22.5M |
| trb | TRB | 280M | 435M | 510M | 750M | 880M | X |
| trb_ethash | TRB+ETH | 122M+20.3M | 170M+34M | 240M+26.7M | 315M+45M | - | X |

Sample Usages

BTM

f2pool: nbminer -a tensority -o stratum+tcp://btm.f2pool.com:9221 -u bm1xxxxxxxxxx.worker
antpool: nbminer -a tensority -o stratum+tcp://stratum-btm.antpool.com:6666 -u username.worker
matpool.io: nbminer -a tensority -o stratum+tcp://btm.matpool.io:8118 -u bm1xxxxxxxxxxx.worker

ETH

ethermine: nbminer -a ethash -o ethproxy+tcp://asia1.ethermine.org -u 0x12343bdgf.worker
sparkpool: nbminer -a ethash -o ethproxy+tcp://cn.sparkpool.com:3333 -u 0x12343bdgf.worker
f2pool: nbminer -a ethash -o ethproxy+tcp://eth.f2pool.com:8008 -u 0x12343bdgf.worker
nanopool: nbminer -a ethash -o ethproxy+tcp://eth-asia1.nanopool.org:9999 -u 0x12343bdgf.worker
nicehash: nbminer -a ethash -o nicehash+tcp://daggerhashimoto.eu.nicehash.com:3353 -u btc_address.worker

BTM+ETH

f2pool: nbminer -a tensority_ethash -o stratum+tcp://btm.f2pool.com:9221 -u btm_address.btm_worker -do ethproxy+tcp://eth.f2pool.com:8008 -du eth_address.eth_worker

Grin29

sparkpool: nbminer -a cuckarood -o stratum+tcp://grin.sparkpool.com:6666 -u 123@qq.com/worker
f2pool: nbminer -a cuckarood -o stratum+tcp://grin29.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckarood -o nicehash+tcp://grincuckaroo29.eu.nicehash.com:3371 -u btc_address.worker

Grin31

sparkpool: nbminer -a cuckatoo -o stratum+tcp://grin.sparkpool.com:66667-u 123@qq.com/worker
f2pool: nbminer -a cuckatoo -o stratum+tcp://grin31.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckatoo -o nicehash+tcp://grincuckaroo31.eu.nicehash.com:3372 -u btc_address.worker

AE

f2pool: nbminer -a cuckoo_ae -o stratum+tcp://ae.f2pool.com:7898 -u ak_xxxxxxx.worker passwd
beepool: nbminer -a cuckoo_ae -o stratum+tcp://ae-pool.beepool.org:9505 -u ak_xxxx.worker passwd
uupool: nbminer -a cuckoo_ae -o stratum+tcp://ae.uupool.cn:6210 -u ak_xxxxxx.worker passwd
nicehash: nbminer -a cuckoo_ae -o nicehash+tcp://cuckoocycle.eu.nicehash.com:3376 -u btc_address.test
SWAP

luckypool: nbminer -a cuckaroo_swap -o stratum+tcp://swap2.luckypool.io:4466 -u wallet_address:worker
herominers: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u wallet_address.worker
herominers solo: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u solo:wallet_address.worker:arbitrary

SERO

beepool: nbminer -a progpow_sero -o stratum+tcp://sero-pool.beepool.org:9515 -u wallet_address.worker pswd
f2pool: nbminer -a progpow_sero -o stratum+tcp//sero.f2pool.com:4200 -u wallet_address.worker pswd

SIPC

simpool: nbminer -a sipc -o stratum+tcp://sipc.simpool.vip:8801 -u username.worker passwd
matpool: nbminer -a sipc -o stratum+tcp://sipc.matpool.io:11100 -u username.worker passwd

CKB

sparkpool: nbminer -a eaglesong -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd
beepool: nbminer -a eaglesong -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd
uupool: nbminer -a eaglesong -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd
f2pool: nbminer -a eaglesong -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd

CKB+ETH

sparkpool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd -do stratum+tcp://cn.sparkpool.com:3333 -du wallet.worker passwd
beepool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd -do stratum+tcp://eth-pool.beepool.org:9530 -du wallet.worker passwd
uupool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker passwd
f2pool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker passwd

BFC

uupool: nbminer -a bfc -o stratum+tcp://bfc.uupool.cn:12210 -u user.worker
bfcpool: nbminer -a bfc -o stratum+tcp://ss.bfcpool.com:3333 -u wallet.worker

HNS

f2pool: nbminer -a hns -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker

HNS+ETH

f2pool: nbminer -a hns_ethash -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker

TRB

uupool: nbminer -a trb -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker
hashpool: nbminer -a trb -o stratum+tcp://pplns.trb.stratum.hashpool.com:8208 -u wallet.worker

TRB+ETH

uupool: nbminer -a trb_ethash -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker

RVNt

minermore: nbminer -a kawpow -o stratum+tcp://rvnt.minermore.com:4505 -u wallet.worker passwd

CMD options

-h, --help Displays this help.
-v, --version Displays version information.
-c, --config <config file path> Use json format config file rather than cmd line options.
-a, --algo <algo> Select mining algorithm
BTM: tensority
ETH: ethash
BTM+ETH: tensority_ethash
Grin29: cuckaroo
Grin31: cuckatoo
SWAP: cuckaroo_swap
--api <host port> The endpoint for serving REST API.
-o, --url <url> Mining pool url.
BTM: stratum+tcp://btm.f2pool.com:9221
BTM with SSL: stratum+ssl://btm.f2pool.com:9443
ETH: ethproxy+tcp://eth.f2pool.com:8008
ETH with NiceHash: ethnh+tcp://daggerhashimoto.eu.nicehash.com:3353
-u, --user <user> User used in Mining pool, wallet address or username.
-o1, --url1 <url> url for backup mining pool 1.
-u1, --user1 <user> username for backup mining pool 1.
-o2, --url2 <url> url for backup mining pool 2.
-u2, --user2 <user> username for backup mining pool 2.
-di, --secondary-intensity <intensity> The relative intensity when dual mining.
-do, --secondary-url <url> ETH mining pool when dual mining.
-du, --secondary-user <user> ETH username when dual mining.
-do1, --secondary-url1 <url> Backup 1 ETH mining pool when dual mining.
-du1, --secondary-user1 <user> Backup 1 ETH username when dual mining.
-do2, --secondary-url2 <url> Backup 2 ETH mining pool when dual mining.
-du2, --secondary-user2 <user> Backup 2 ETH username when dual mining.
-d, --devices <devices> Specify GPU list to use. Format: "-d 0,1,2,3" to use first 4 GPU.
-i, --intensity <intensities> Comma-separated list of intensities (1 -100).
-strict-ssl Check validity of certificate when use SSL connection.
--cuckoo-intensity <intensity> Set intensity of cuckoo, cuckaroo, cuckatoo, [1, 12]. Set to 0 means autumatically adapt. Default: 0.
--cuckatoo-power-optimize Set this option to reduce the range of power consumed by rig when minining with algo cuckatoo. This feature can reduce the chance of power supply shutdown caused by overpowered. Warning: Setting this option may cause drop on minining performance.
--temperature-limit <temp-limit> Set temperature limit of GPU, if exceeds, stop GPU for 10 seconds and continue.
-log Generate log file named `log_<timestamp>.txt`.
--log-file <filename> Generate custom log file. Note: This option will override `--log`.
--no-nvml Do not query cuda device health status.
--fidelity-timeframe <timeframe> Set timeframe for the calculation of fidelity, unit in hour. Default: 24.
-long-format Use 'yyyy-MM-dd HH:mms,zzz' for log time format.
--device-info Print device cuda information.
--fee <fee> Change devfee in percentage, [0-5]. Set to '0' to turn off devfee with lower hashrate. Otherwise, devfee = max(set_value, def_value).
--generate-config <filename> Generate a sample config json file.
--no-watchdog Disable watchdog process.
--platform <platform> Choose platform,0: NVIDIA+AMD (default), 1: NVIDIA only, 2: AMD only


Change Log

new version 29.1

- Fix low hashrate of kawpow on AMD RDNA GPU.
- Improve kawpow hashrate on AMD GPU.


v29.0(2020-04-03)
Add support for RVN new algo 'kawpow' mining on Nvidia & AMD gpus.


v28.1(2020-03-30)
Support HNS & HNS+ETH mining on NiceHash


v28.0(2020-03-28)
Add support for mining TRB & TRB+ETH on Nvidia GPU
Add support for mining ETH on `miningrigrentals`.
Minor improvements and fixes.


v27.7(2020-03-14)
Fix ETH mining on NiceHash.
Fix NVML initialization failure on certain cases.


v27.6(2020-03-14)
Improve HNS & HNS+ETH on Nvidia GPU.


v27.5(2020-03-05)
Fix high ETH reject rate on certain pools when mining HNS+ETH.
Slightly improve mining HNS+ETH on Nvidia GPU.


v27.4(2020-02-28)
Fix support the certain AMD Vega GPUs.
Fix a potential bug when mining under AMD+Nvidia mixed rig.


v27.3(2020-02-27)
Add HNS+ETH mining on AMD GPU
Improve HNS+ETH performance on Nvidia GPU
Note: `-di` calculation is changed in this version for HNS+ETH.
The value of `-di` = `work_size_of_hns` / `work_size_of_eth`
E.g, `-di 5` on a stock freq 1070ti will get 26M for eth & 130M for hns.


v27.2(2020-02-20)
Improve HNS performance on AMD GPU


v27.1(2020-02-19)
Improve HNS performance on Nvidia GPU
Add support for HNS mining for AMD GPU


v27.0(2020-02-18)
Add support for HNS & HNS_ETH mining for NVIDIA GPU
Minor bug fix and improvements.


v26.2(2019-11-21)

Improve CKB+ETH performance on AMD GPU.
Fix bug of 26.1: Launch crash on certain AMD rigs.


v26.1(2019-11-15)

Add support for mining CKB+ETH on AMD GPU.
Improve performance for mining CKB on Nvidia GPU.


v26.0(2019-10-11)

Add support for BFC mininig on Nvidia GPU.
Fix CKB compatibility on AMD GPU.
Fix cuckcoocycle on nicehash.


v25.5(2019-10-05)

Fix a bug when mining CKB+ETH.
Fix a compatibility issue in CKB stratum protocol.


v25.4(2019-10-04)

Improve CKB mining performance on both NVIDIA & AMD cards.
Improve CKB+ETH performance on NVIDIA cards.
Add support for mining SERO on AMD cards.
Add a new option `--platform` to allow users to choose GPU platform.


v25.2(2019-09-10)

Add support for `CKB` mining on AMD cards under linux.
Bug fix.


v25.1(2019-09-07)

Add support for `CKB` mining on AMD cards.

v25.0(2019-09-05)


Add support for `CKB` mining & `CKB`+`ETH` dual mining.
Enhance `-di` parameter to support comma separated list to specify `-di` value for each card.
The default value of `-di` for `CKB`+`ETH` mining ranges from 4 ~ 8 depending on GPU model, valid value range in [1, 10], higher value means higher intensity for `ETH`.
The best value of `-di` differs by GPU model, overclock and power limitation.

poslano v temi :: NBMiner v29.1, GPU Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB
Pes :: 08.04.2020 ob 20:31
NoDevFee - for Claymore`s Dual Ethereum and Phoenix miner
=========================

Latest version is v15.0 - Supercharged Edition:

- now miner supports up to #384 epoch (4GB DAG size). Note that previous versions support up to #299 epoch, you will not be able to use old versions after #299 epoch.
- added support for Navi cards (ETH-only mode).
- now miner sets environment variables automatically (required for 4GB AMD cards).
- a few minor bug fixes and improvements.


DOWNLOAD LINK: MEGA - NoDevFee_v.15.0

Dev Fee's - 0.05%

version is v14.7 - Supercharged Edition:

- now the miner driver does not require switching Windows to Test Mode. If you want to turn Test Mode off, use "-driver uninstall" option (with admin rights) and reboot,
then start miner with admin rights to install new driver automatically when necessary (or use "-driver install" option directly).
If you have any problems with signed driver you can use "-driver install_test" option, it uses old approach: enables Test Mode (reboot is required) and installs unsigned driver.
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except Linux gpu-pro drivers and Radeon7 cards.
- updated Remote Manager to show total power consumption.
- fixed issue with "-logsmaxsize" option when "-logfile" option is used to specify directory for log files.
- a few minor bug fixes and improvements.

version is v14.6 - Supercharged Edition:

- now "-rxboost" option also supports old AMD cards (Hawaii, Tonga, Tahiti, Pitcairn), use "-rxboost 1" to improve hashrate up to 5% by applying some additional memory timings.
- now "-rxboost" option supports all AMD drivers.
- now "-strap" for AMD cards also supports AMD blockchain drivers.
- some changes to further reduce stale shares a bit.
- added "-minspeedtime" option.
- added statistics for shares accepting time (min/max/average), press "s" to see it.
- updated Remote Manager to show shares accepting time.
- a few minor bug fixes and improvements.

Version 14.0.0 Beta

features of the program
autostart with Windows
Commission for software developers (Claymore dual miner and Phoenix miner) returns to your wallet
Simplicity in setting (You do not need to own any special features in order to customize the mining)



cons of the program
supports only ETH
This is the first version of the program so there are possible bugs
Since we are still developing and we do not need much money from the commission, we take 25% of the miner's wallet. So, you get a commission at the rate of 0.25% when you are mining with Claymore Dual miner. And when mining with a Phoenix miner 0.16%.



in the future
monitor farm without white ip
Adding other Crypto-Currency
Adding other pools
Creating website
Improve stability and increase functionality



Suported pools
Ethermine.org
Nanopool.org
f2pool.com
dwarfpool.com
nicehash.com


Dev Fee's - 0.05%


FEATURES:


- Supports applying optimized memory timings (straps) on-the-fly in Windows, without flashing VBIOS (currently Polaris, Vega, Nvidia 10xx cards only), up to 20% speedup. Best straps for Ethereum are included.
- Supports new "dual mining" mode: mining both Ethereum and Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code, optimized assembler kernels.
- Supports both AMD and nVidia cards, even mixed.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum and Siacoin solo mining.
- Supports both HTTP and Stratum for Decred.
- Supports both HTTP and Stratum for Siacoin.
- Supports Stratum for Lbry, Pascal, Blake2s, Keccak.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.


This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal, POOL for Blake2s, POOL for Keccak.

For old AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility.
For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.
For AMD cards, set the following environment variables, especially if you have 2...4GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer.
For all 2GB cards and 3GB cards devfee is 0%, so on these cards you can mine all ETH forks without devfee, this miner is completely free in this case.
If some cards are 2...3GB and some >3GB, 2...3GB cards still mine for you during devfee time, only cards that have more than 3GB memory will be used for devfee mining. Miner displays appropriate messages during startup.
Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee.
So the developer fee is 0...1%, if you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1" though miner will show same hashrate.
Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.

This version is for recent AMD videocards only: 7xxx, 2xx and 3xx, 2GB or more. Recent nVidia videocards are supported as well.

CONFIGURATION FILE

You can use "config.txt" file instead of specifying options in command line.
If there are not any command line options, miner will check "config.txt" file for options.
If there is only one option in the command line, it must be configuration file name.
If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.
Place one option per line, if first character of a line is ";" or "#", this line will be ignored.
You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.

If for Ethereum-only mining:

ethpool:
NoDevFee.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

sparkpool:
NoDevFee.exe -epool eu.sparkpool.com:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

f2pool:
NoDevFee.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

nanopool:
NoDevFee.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

nicehash:
NoDevFee.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0

Ethereum forks mining:

NoDevFee.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1

FAILOVER

Use "epools.txt" and "dpools.txt" files to specify additional pools (you can use "-epoolsfile" and "-dpoolsfile" options to use different filenames).
These files have text format, one pool per line. Every pool has 3 connection attempts.
Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.
If the first character of a line is ";" or "#", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing.
If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.
You can reload "epools.txt" and "dpools.txt" files in runtime by pressing "r" key.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.
You can also use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.
You can also select current pool in runtime by pressing "e" or "d" key.


REMOTE MONITORING/MANAGEMENT

Miner supports remote monitoring/management via JSON protocol over raw TCP/IP sockets. You can also get recent console text lines via HTTP.
Start "EthMan.exe" from "Remote management" subfolder (Windows version only).
Check built-in help for more information. "API.txt" file contains more details about protocol.


KNOWN ISSUES

- AMD cards: on some cards you can notice non-constant mining speed in dual mode, sometimes speed becomes a bit slower. This issue was mostly fixed in recent versions, but not completely.
- AMD cards: in Linux with gpu-pro drivers, the list of GPUs may differ from the list of temperatures. You can use -di to change order of GPUs to match both lists.
- nVidia cards: dual mode is not so effective as for AMD cards.
- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions.
I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad.
Note that I can guarantee clean binaries only for official links in my posts on this forum (bitcointalk). If you downloaded miner from some other link - it really can be a virus.
However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.


TROUBLESHOOTING

1. Install Catalyst v15.12 for old AMD cards; for Fury, Polaris and Vega cards use latest blockchain drivers.
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB or more.
5. Reboot computer.
6. Check hardware, risers.
7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.

poslano v temi :: NoDevFee Claymore`s Dual Ethereum and Phoenix miner v.15.0
Pes :: 06.04.2020 ob 15:57


NBMiner

GPU Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB.



Download

Download From Mega Release: https://mega.nz/folder/EahVUJJT#76qOy681FrAA4KahMaDkeA

Performance (stock frequency)
| Algorithm | Coin | P106-100 | P104-8G | 1070ti | 1080ti | 2080 | RX580 2048sp |
| :--------------- | :-----: | :--------: | :--------: | :--------: | :------: | :------: | :----------: |
| tensority | BTM | 1,900 | 3000 | 3,400 | 5,000 | 11,500 | X |
| ethash | ETH | 21.2M | 34.5M | 26.9M | 46M | 35.5M | X |
| tensority_ethash | BTM+ETH | 950+15.5M | 1600+26.5M | 1350+22M | 2450+40M | 7000+28M | X |
| cuckaroo | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| cuckarood | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 9.1 | X |
| cuckatoo | GRIN31 | - | 0.89 | 0.94 | 1.56 | 1.65 | X |
| cuckoo_ae | AE | 3.35 | 5.5 | 5.15 | 7.9 | 8.75 | X |
| cuckaroo_swap | SWAP | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| progpow_sero | SERO | 10.3M | 17.5M | 13.3M | 22.5M | 25.8M | 10M |
| sipc | SIPC | 600k | 940k | 780k | 1170k | 1050k | X |
| eaglesong | CKB | 430M | 640M | 740M | 1150M | 1160M | 350M |
| eaglesong_ethash | CKB+ETH | 203M+20.5M | 275M+34M | 415M+26.5M | 600M+44M | 790M+36M | 200M+22M |
| bfc | BFC | 80 | 130 | 120 | 190 | 210 | X |
| hns | HNS | 170M | 255M | 300M | 455M | 425M | 145M |
| hns_ethash | HNS+ETH | 76M+19M | 120M+30M | 158M+26.2M | 176M+44M | 305M+34M | 68M+22.5M |
| trb | TRB | 280M | 435M | 510M | 750M | 880M | X |
| trb_ethash | TRB+ETH | 122M+20.3M | 170M+34M | 240M+26.7M | 315M+45M | - | X |
| kawpow | RVNt | 10.3M | 17.5M | 13.3M | 22.5M | 25.8M | 10.3M |


Features
Support Windows & Linux.
Support backup mining pool configuration.
Support SSL connection to mining pools.

Dev Fee

tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%
hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%

Requirements
| Algorithm | Coin | Compute Capability | Memory (Win7 & Linux) | Memory (Win10) |
| :--------------- | :-----: | :----------------: | :-------------------: | :------------: |
| tensority | BTM | 6.1, 7.0, 7.5 | 1GB | 1GB |
| ethash | ETH | 6.0, 6.1, 7.0, 7.5 | 4GB | 4GB |
| tensority_ethash | BTM+ETH | 6.1, 7.0, 7.5 | 4GB | 4GB |
| cuckaroo(d) | GRIN29 | 6.0, 6.1, 7.0, 7.5 | 5GB | 6GB |
| cuckatoo | GRIN31 | 6.0, 6.1, 7.0, 7.5 | 8GB | 10GB |
| cuckoo_ae | AE | 6.0, 6.1, 7.0, 7.5 | 5GB | 6GB |
| cuckaroo_swap | SWAP | 6.0, 6.1, 7.0, 7.5 | 5GB | 6GB |
| progpow_sero | SERO | 6.0 - 7.5 | 2GB | 2GB |
| sipc | SIPC | 6.0, 6.1, 7.0, 7.5 | 1GB | 1GB |
| eaglesong | CKB | 6.0, 6.1, 7.0, 7.5 | 0.1GB | 0.1GB |
| eaglesong_ethash | CKB+ETH | 6.0, 6.1, 7.0, 7.5 | 4GB | 4GB |
| bfc | BFC | 6.0, 6.1, 7.0, 7.5 | 5GB | 6GB |
| hns | HNS | 6.0, 6.1, 7.0, 7.5 | 0.1GB | 0.1GB |
| hns_ethash | HNS+ETH | 6.0, 6.1, 7.0, 7.5 | 4GB | 4GB |
| trb | TRB | 6.0, 6.1, 7.0, 7.5 | 0.1GB | 0.1GB |
| trb_ethash | TRB+ETH | 6.0, 6.1, 7.0, 7.5 | 4GB | 4GB |
| kawpow | RVNt | 6.0, 6.1, 7.0, 7.5 | 3GB | 3GB |


Sample Usages

BTM
f2pool: nbminer -a tensority -o stratum+tcp://btm.f2pool.com:9221 -u bm1xxxxxxxxxx.worker
antpool: nbminer -a tensority -o stratum+tcp://stratum-btm.antpool.com:6666 -u username.worker
matpool.io: nbminer -a tensority -o stratum+tcp://btm.matpool.io:8118 -u bm1xxxxxxxxxxx.worker

ETH
ethermine: nbminer -a ethash -o ethproxy+tcp://asia1.ethermine.org -u 0x12343bdgf.worker
sparkpool: nbminer -a ethash -o ethproxy+tcp://cn.sparkpool.com:3333 -u 0x12343bdgf.worker
f2pool: nbminer -a ethash -o ethproxy+tcp://eth.f2pool.com:8008 -u 0x12343bdgf.worker
nanopool: nbminer -a ethash -o ethproxy+tcp://eth-asia1.nanopool.org:9999 -u 0x12343bdgf.worker
nicehash: nbminer -a ethash -o nicehash+tcp://daggerhashimoto.eu.nicehash.com:3353 -u btc_address.worker

BTM+ETH
f2pool: nbminer -a tensority_ethash -o stratum+tcp://btm.f2pool.com:9221 -u btm_address.btm_worker -do ethproxy+tcp://eth.f2pool.com:8008 -du eth_address.eth_worker

Grin29
sparkpool: nbminer -a cuckarood -o stratum+tcp://grin.sparkpool.com:6666 -u 123@qq.com/worker
f2pool: nbminer -a cuckarood -o stratum+tcp://grin29.f2pool.com:13654 -u username.workerasswd
nicehash: nbminer -a cuckarood -o nicehash+tcp://grincuckaroo29.eu.nicehash.com:3371 -u btc_address.worker

Grin31
sparkpool: nbminer -a cuckatoo -o stratum+tcp://grin.sparkpool.com:66667-u 123@qq.com/worker
f2pool: nbminer -a cuckatoo -o stratum+tcp://grin31.f2pool.com:13654 -u username.workerasswd
nicehash: nbminer -a cuckatoo -o nicehash+tcp://grincuckaroo31.eu.nicehash.com:3372 -u btc_address.worker

AE
f2pool: nbminer -a cuckoo_ae -o stratum+tcp://ae.f2pool.com:7898 -u ak_xxxxxxx.workerasswd
beepool: nbminer -a cuckoo_ae -o stratum+tcp://ae-pool.beepool.org:9505 -u ak_xxxx.workerasswd
uupool: nbminer -a cuckoo_ae -o stratum+tcp://ae.uupool.cn:6210 -u ak_xxxxxx.workerasswd
nicehash: nbminer -a cuckoo_ae -o nicehash+tcp://cuckoocycle.eu.nicehash.com:3376 -u btc_address.test

SWAP
luckypool: nbminer -a cuckaroo_swap -o stratum+tcp://swap2.luckypool.io:4466 -u wallet_address:worker
herominers: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u wallet_address.worker
herominers solo: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u solo:wallet_address.worker:arbitrary

SERO
beepool: nbminer -a progpow_sero -o stratum+tcp://sero-pool.beepool.org:9515 -u wallet_address.workerswd
f2pool: nbminer -a progpow_sero -o stratum+tcp//sero.f2pool.com:4200 -u wallet_address.workerswd

SIPC
simpool: nbminer -a sipc -o stratum+tcp://sipc.simpool.vip:8801 -u username.workerasswd
matpool: nbminer -a sipc -o stratum+tcp://sipc.matpool.io:11100 -u username.workerasswd

CKB
sparkpool: nbminer -a eaglesong -o stratum+tcp://ckb.sparkpool.com:8888 -u user.workerasswd
beepool: nbminer -a eaglesong -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/workerasswd
uupool: nbminer -a eaglesong -o stratum+tcp://ckb.uupool.cn:10861 -u user.workerasswd
f2pool: nbminer -a eaglesong -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.workerasswd

CKB+ETH
sparkpool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.sparkpool.com:8888 -u user.workerasswd -do stratum+tcp://cn.sparkpool.com:3333 -du wallet.workerasswd
beepool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/workerasswd -do stratum+tcp://eth-pool.beepool.org:9530 -du wallet.workerasswd
uupool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.uupool.cn:10861 -u user.workerasswd -do stratum+tcp://eth.uupool.cn:8008 -du wallet.workerasswd
f2pool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.workerasswd -do stratum+tcp://eth.f2pool.com:8008 -du wallet.workerasswd

BFC
uupool: nbminer -a bfc -o stratum+tcp://bfc.uupool.cn:12210 -u user.worker
bfcpool: nbminer -a bfc -o stratum+tcp://ss.bfcpool.com:3333 -u wallet.worker

HNS
f2pool: nbminer -a hns -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker

HNS+ETH
f2pool: nbminer -a hns_ethash -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker

TRB
uupool: nbminer -a trb -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker
hashpool: nbminer -a trb -o stratum+tcp://pplns.trb.stratum.hashpool.com:8208 -u wallet.worker

TRB+ETH
uupool: nbminer -a trb_ethash -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker

RVNt
minermore: nbminer -a kawpow -o stratum+tcp://rvnt.minermore.com:4505 -u wallet.workerasswd

CMD options
-h, --help Displays this help.
-v, --version Displays version information.
-c, --config <config file path> Use json format config file rather than cmd line options.
-a, --algo <algo> Select mining algorithm
BTM: tensority
ETH: ethash
BTM+ETH: tensority_ethash
Grin29: cuckaroo
Grin31: cuckatoo
SWAP: cuckaroo_swap
--api <hostort> The endpoint for serving REST API.
-o, --url <url> Mining pool url.
BTM: stratum+tcp://btm.f2pool.com:9221
BTM with SSL: stratum+ssl://btm.f2pool.com:9443
ETH: ethproxy+tcp://eth.f2pool.com:8008
ETH with NiceHash: ethnh+tcp://daggerhashimoto.eu.nicehash.com:3353
-u, --user <user> User used in Mining pool, wallet address or username.
-o1, --url1 <url> url for backup mining pool 1.
-u1, --user1 <user> username for backup mining pool 1.
-o2, --url2 <url> url for backup mining pool 2.
-u2, --user2 <user> username for backup mining pool 2.
-di, --secondary-intensity <intensity> The relative intensity when dual mining.
-do, --secondary-url <url> ETH mining pool when dual mining.
-du, --secondary-user <user> ETH username when dual mining.
-do1, --secondary-url1 <url> Backup 1 ETH mining pool when dual mining.
-du1, --secondary-user1 <user> Backup 1 ETH username when dual mining.
-do2, --secondary-url2 <url> Backup 2 ETH mining pool when dual mining.
-du2, --secondary-user2 <user> Backup 2 ETH username when dual mining.
-d, --devices <devices> Specify GPU list to use. Format: "-d 0,1,2,3" to use first 4 GPU.
-i, --intensity <intensities> Comma-separated list of intensities (1 -100).
-strict-ssl Check validity of certificate when use SSL connection.
--cuckoo-intensity <intensity> Set intensity of cuckoo, cuckaroo, cuckatoo, [1, 12]. Set to 0 means autumatically adapt. Default: 0.
--cuckatoo-power-optimize Set this option to reduce the range of power consumed by rig when minining with algo cuckatoo. This feature can reduce the chance of power supply shutdown caused by overpowered. Warning: Setting this option may cause drop on minining performance.
--temperature-limit <temp-limit> Set temperature limit of GPU, if exceeds, stop GPU for 10 seconds and continue.
-log Generate log file named `log_<timestamp>.txt`.
--log-file <filename> Generate custom log file. Note: This option will override `--log`.
--no-nvml Do not query cuda device health status.
--fidelity-timeframe <timeframe> Set timeframe for the calculation of fidelity, unit in hour. Default: 24.
-long-format Use 'yyyy-MM-dd HH:mms,zzz' for log time format.
--device-info Print device cuda information.
--fee <fee> Change devfee in percentage, [0-5]. Set to '0' to turn off devfee with lower hashrate. Otherwise, devfee = max(set_value, def_value).
--generate-config <filename> Generate a sample config json file.
--no-watchdog Disable watchdog process.
--platform <platform> Choose platform,0: NVIDIA+AMD (default), 1: NVIDIA only, 2: AMD only

API Reference

Web Monitor
Open http://api_hostort/ in your browser to use web monitor.
Default: http://127.0.0.1:22333

Requests
GET http://api_hostort/api/v1/status

Response Sample
{
"miner": {
"devices": [{
"core_clock": 1556,
"core_utilization": 100,
"fan": 36,
"hashrate": 1499,
"hashrate2": "23.0 M",
"hashrate_raw": 1499,
"hashrate2_raw": 23030000,
"id": 0,
"info": "GeForce GTX 1080 Ti 11178 MB",
"power": 182,
"temperature": 65
}, {
"core_clock": 1518,
"core_utilization": 100,
"fan": 34,
"hashrate": 1490,
"id": 1,
"info": "GeForce GTX 1080 Ti 11178 MB",
"power": 172,
"temperature": 62
}],
"total_hashrate": 2989,
"total_hashrate_raw": 2989,
"total_hashrate2": "48.3 M",
"total_hashrate2_raw": 48308746,
"total_power_consume": 354
},
"start_time": 1532482659,
"stratum": {
"accepted_share_rate": 0.99,
"accepted_shares": 99,
"password": "",
"rejected_share_rate": 0.01,
"rejected_shares": 1,
"url": "btm.pool.zhizh[Suspicious link removed]p:3859",
"use_ssl": false,
"user": "bmxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx.test",
"difficulty": "0003ffff",
"latency": 65
},
"version": "v10.0"
}


Change Log

v29.0(2020-04-03)
Add support for RVN new algo 'kawpow' mining on Nvidia & AMD gpus.

v28.1(2020-03-30)
Support HNS & HNS+ETH mining on NiceHash

v28.0(2020-03-28)
Add support for mining TRB & TRB+ETH on Nvidia GPU
Add support for mining ETH on `miningrigrentals`.
Minor improvements and fixes.

v27.7(2020-03-14)
Fix ETH mining on NiceHash.
Fix NVML initialization failure on certain cases.

v27.6(2020-03-14)
Improve HNS & HNS+ETH on Nvidia GPU.

v27.5(2020-03-05)
Fix high ETH reject rate on certain pools when mining HNS+ETH.
Slightly improve mining HNS+ETH on Nvidia GPU.

v27.4(2020-02-28)
Fix support the certain AMD Vega GPUs.
Fix a potential bug when mining under AMD+Nvidia mixed rig.

v27.3(2020-02-27)
Add HNS+ETH mining on AMD GPU
Improve HNS+ETH performance on Nvidia GPU
Note: `-di` calculation is changed in this version for HNS+ETH.
The value of `-di` = `work_size_of_hns` / `work_size_of_eth`
E.g, `-di 5` on a stock freq 1070ti will get 26M for eth & 130M for hns.

v27.2(2020-02-20)
Improve HNS performance on AMD GPU

v27.1(2020-02-19)
Improve HNS performance on Nvidia GPU
Add support for HNS mining for AMD GPU

v27.0(2020-02-18)
Add support for HNS & HNS_ETH mining for NVIDIA GPU
Minor bug fix and improvements.

v26.2(2019-11-21)

Improve CKB+ETH performance on AMD GPU.
Fix bug of 26.1: Launch crash on certain AMD rigs.

v26.1(2019-11-15)

Add support for mining CKB+ETH on AMD GPU.
Improve performance for mining CKB on Nvidia GPU.

v26.0(2019-10-11)

Add support for BFC mininig on Nvidia GPU.
Fix CKB compatibility on AMD GPU.
Fix cuckcoocycle on nicehash.

v25.5(2019-10-05)

Fix a bug when mining CKB+ETH.
Fix a compatibility issue in CKB stratum protocol.

v25.4(2019-10-04)

Improve CKB mining performance on both NVIDIA & AMD cards.
Improve CKB+ETH performance on NVIDIA cards.
Add support for mining SERO on AMD cards.
Add a new option `--platform` to allow users to choose GPU platform.

v25.2(2019-09-10)

Add support for `CKB` mining on AMD cards under linux.
Bug fix.

v25.1(2019-09-07)

Add support for `CKB` mining on AMD cards.

v25.0(2019-09-05)

Add support for `CKB` mining & `CKB`+`ETH` dual mining.
Enhance `-di` parameter to support comma separated list to specify `-di` value for each card.
The default value of `-di` for `CKB`+`ETH` mining ranges from 4 ~ 8 depending on GPU model, valid value range in [1, 10], higher value means higher intensity for `ETH`.
The best value of `-di` differs by GPU model, overclock and power limitation.

v24.4(2019-08-16)
Fix SIPC dxpool compatibility.
1080 & 1080ti users should use `OhGodAnETHlargementPill` to boost SIPC performance.

v24.3(2019-08-15)
Add support for mining SIPC.
Fix high CPU usage mining SERO with 24.1 & 24.2
Fix Grin intensity.

v24.2(2019-07-17)
Disable the auto-switch from cuckaroo -> cuckarood
Slightliy improve RTX2060 Grin29 performance under win10
Fix startup stuck issue on some linux distro.
Add new option `--generate-config` to generate a sample config file.
Note: Linux sero mining need to set a env before start if run with --no-watchdog, please check start_sero.sh

v24.1(2019-07-16)
Fix lower hashrate than previous version for Grin29 & AE on 10xx 6GB cards
Fix mining Grin29 AE on Turing 6GB Cards on Win10.
Fix the disfunction of auto-reboot when GPU error happens.
Fix start using json config file.
Change the GPU MEM size display upon launch from Total Size to Available Size.

v24.0(2019-07-15)
Support Grin29 fork on 17th, July.
When using algo `cuckaroo`, v24.0 will do an automatically switch to `cuckarood` on height 262080.
Add a temporary option `-grin29-fork-height`, user can test the auto-switch by setting this option to lower height value.
Improve performance on Grin29 & AE.
Add support for mining `SERO`, algo `progpow_sero`.
Add option `-intensity` to set the intensity level for each GPU.
Add option `-fidelity-timeframe` to customize the timeframe for fidelity calculation.
Add option `-log-file` to set a specified log filename.
Add option `-no-nvml` to close the periodical query for GPU status.
Add new method to turn on NiceHash protocol, `nicehash+tcp://`
Also compatible with previous url based method.
Minor improvement and bug fix.

v23.3(2019-06-14)
Fix mining AE (cuckoocycle) on NiceHash.
Add option to set a temperature limit on GPU.

v23.2(2019-05-09)
Improve Grin & AE & SWAP performance.
Add support for mining AE on NiceHash.
Add display output of Fidelity.
Minor improvement and bug fix.

v22.3(2019-04-15)
Improve performance of Grin31 on 1080ti & 2080ti.

v22.2(2019-04-15)
Improve compatiblity for mining Grin31 on windows 8GB cards.
Set default --cuckoo-intensity to 4, lower CPU usage on default settings when mining Grin & AE.

v22.1(2019-04-12)
Add support for mining Swap (XWP).
Improve Grin29 & AEperformance.
Improve Windows compatibility on Grin & AE, significant boost on performance.

v21.4(2019-04-03)
Improve Grin31 performance.
Improve performance of Grin29 & AE on RTX cards.
Fix Grin31 compatibility on Win7 with 8G cards.
New option to reduce the range of power consumption by multi-gpu rig.
Add miner Up Time print in cmd outputs.

v21.3(2019-03-20)
Fix bug: Occasionlly lower local hashrate than previously version.
Do not run GPU if mining pool not connected when mining Grin & AE.

v21.2(2019-03-15)
Fix bug: "GPU hung detected" happens under some normal conditions.

v21.1(2019-03-14)
Improve Grin29 performance
Add support for mining Grin & AE on Turing cards.
Add detection for GPU hung.
Increase chance of accept share when mining Grin on NiceHash.
Fix ETH mining on NiceHash.
Fix "accecpt share checking" bug when using backup mining pools.

v21.0(2019-03-06)
Add suuport for AE (Aeternity)
Improve performance on Grin29 & Grin31
Improve miner stability.

v20.0(2019-02-21)
Add support for Grin31
Add support for mining Grin on NiceHash
Add new option to tune CPU usage when mining Grin.
Improve BTM+ETH performance on RTX cards.
FIx bug of lower hashrate when mining BTM on rigs with mixed 10 series and 20 series cards.
Do not add a default worker name if no worker name specified by user.

v14.0(2019-01-30)
BTM mining, improve over 200% on RTX cards.
Improve Grin mining.

v13.2(2019-01-17)
Add support mining Grin on 1066-win10.
Fix support for Solo mining using grin-server.

v13.1(2019-01-15)
Add support for mining Grin coin (cuckaroo29).
Minor bug fix and improvement.

v12.4(2018-01-05)
Improve hashrate of BTM+ETH dual mining about 6%.

v12.3(2018-12-30)
Fix a bug that could cause many reject shares when epoch changes under ETH dual mining .

v12.2(2018-12-26)
Fix high stale share and reject share ratio when use big `-di` for dual mining BTM+ETH.
Fix the support of web monitor for dual mining.
Minor bug fixs and improvements.

v12.1(2018-12-24)
Fix support ETH PPS+ mode on F2pool
Add support for ETH on NiceHash (with protocol header `ethnh`)
Fix rest api when dual mining.
Minor bug fixs.

v12.0(2018-12-19)
**New `BTM+ETH` dual mining mode.**
Decrease the required driver version to 377.
Temporarily remove support for XMR mining.
Fix start using config file.
Add a default protocol header if not specified.

v11.0(2018-12-12)
Improve BTM hashrate.
Add support for ETH and XMR mining.
Optimize handle for new job, increase profit on mining pool.
Colorful output on console.
Add support for backup mining pools.
Decrease dev fee of BTM to 2%.

v10.0(2018-10-03)
Improve hashrate

v9.0(2018-08-28)
Improve hashrate ~30%
Improve stability

v8.0(2018-08-17)
Improve hashrate 10%
15%
Lower skipped share rate, increase actual hashrate on mining pool.
Added display for mining pool latency.
Added display for mining pool difficulty.
Improve API web monitor.

poslano v temi :: NBMiner v29.0, GPU Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB
samir84 :: 05.04.2020 ob 22:00
<a href="http://www.freebiebitcoin.com">Earn free bitcoin</a>

poslano v temi :: Free Bitcoin
Pes :: 05.04.2020 ob 9:46
Claymore's NeoScrypt AMD GPU Miner.
=========================

Latest version is v1.2:


- improved stratum routines to support more pools.
- added RX550 card support.


WARNING: NeoScrypt algorithm is VERY HOT, make sure you have powerful PSU and good GPU cooling, use "-powlim 50" option to get full hashrate.

LINKS:

MEGA v1.2: https://mega.nz/#F!FWQxmAwY!DCAmI1NwbFB1eFGuMbOmVw

v1.1:

- fixed issue with rejected shares.
- reduced CPU usage for systems with a lot of GPUs.


This is POOL version. Use any recent drivers. Miner requires up to 1.1GB of GPU memory.
For multi-GPU systems, set Virtual Memory size in Windows at least 16 GB (better more):
"Computer Properties / Advanced System Settings / Performance / Advanced / Virtual Memory".

This miner is free-to-use, however, current developer fee is 2%, every hour the miner mines for 72 seconds for developer.
If you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1") though miner will show same hashrate.
Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.

This miner is heavily optimized and therefore supports only most popular AMD GPU chips: Pitcairn, Tahiti, Hawaii, Tonga, Fiji, Ellesmere, Baffin, Vega.

Only Windows x64 is supported currently. No Linux support. No 32-bit support. No NVidia support.



COMMAND LINE OPTIONS:

-pool NeoScrypt pool address. Only Stratum protocol is supported.

-wal Your wallet address. Also worker name and other options if pool supports it.

-psw Password for NeoScrypt pool, use "x" as password, and/or any other options if pool supports them.

-a algorithm mode for Ellesmere cards (RX470/RX480/RX570/RX580 cards), for other cards always "-a 1" is used. You can specify "-a 1" (default) or "-a 2" and find the best hashrate for your card.
You can also set this option for every card individually, for example "-a 1,2,1".

-di GPU indexes, default is all available GPUs. For example, if you have four GPUs "-di 02" will enable only first and third GPUs (#0 and #2).
You can also turn on/off cards in runtime with "0"..."9" keys and check current statistics with "s" key.
For systems with more than 10 GPUs: use letters to specify indexes more than 9, for example, "a" means index 10, "b" means index 11, etc; also "a", "b", and "c" keys allow you to turn on/off GPU #10, #11 and #12 in runtime.

-ftime failover main pool switch time, in minutes, see "Failover" section below. Default value is 30 minutes, set zero if there is no main pool.

-wd watchdog option. Default value is "-wd 1", it enables watchdog, miner will be closed (or restarted, see "-r" option) if any thread is not responding for 1 minute or OpenCL call failed.
Specify "-wd 0" to disable watchdog.

-r Restart miner mode. "-r 0" (default) - restart miner if something wrong with GPU. "-r -1" - disable automatic restarting. -r >20 - restart miner if something
wrong with GPU or by timer. For example, "-r 60" - restart miner every hour or when some GPU failed.
"-r 1" closes miner and execute "reboot.bat" file ("reboot.bash" or "reboot.sh" for Linux version) in the miner directory (if exists) if some GPU failed.
So you can create "reboot.bat" file and perform some actions, for example, reboot system if you put this line there: "shutdown /r /t 5 /f".

-minspeed minimal speed, in KH/s. If miner cannot reach this speed for 5 minutes for any reason, miner will be restarted (or "reboot.bat" will be executed if "-r 1" is set). Default value is 0 (feature disabled).
You can also specify negative values if you don't want to restart miner due to pool connection issues; for example, "-minspeed -3000" will restart miner only if it cannot reach 3Mh/s at good pool connection.

-retrydelay delay, in seconds, between connection attempts. Default values is "20". Specify "-retrydelay -1" if you don't need reconnection, in this mode miner will exit if connection is lost.

-dbg debug log and messages. "-dbg 0" - (default) create log file but don't show debug messages.
"-dbg 1" - create log file and show debug messages. "-dbg -1" - no log file and no debug messages.

-logfile debug log file name. After restart, miner will append new log data to the same file. If you want to clear old log data, file name must contain "noappend" string.
If missed, default file name will be used.

-logsmaxsize maximal size of debug log files, in MB. At every start the miner checks all files in its folder, selects all files that contain "_log.txt" string and removes oldest files if summary files size is larger than specified value.
Specify "-logsmaxsize 0" to cancel old logs removal. Default value is 1000 (i.e. about 1GB of log files are allowed).

-nofee set "1" to cancel my developer fee at all. In this mode some optimizations are disabled so mining speed will be slower by about 5%.
By enabling this mode, I will lose 100% of my earnings, you will lose only 3% of your earnings.
So you have a choice: "fastest miner" or "completely free miner but a bit slower".
If you want both "fastest" and "completely free" you should find some other miner that meets your requirements, just don't use this miner instead of claiming that I need
to cancel/reduce developer fee, saying that 2% developer fee is too much for this miner and so on.

-benchmark benchmark mode, specify "-benchmark 1" to see hashrate for your hardware.

-li low intensity mode. Reduces mining intensity, useful if your cards are overheated. Note that mining speed is reduced too.
More value means less heat and mining speed, for example, "-li 10" is less heat and mining speed than "-li 1". You can also specify values for every card, for example "-li 3,10,50".
Default value is "0" - no low intensity mode.

-tt set target GPU temperature. For example, "-tt 80" means 80C temperature. You can also specify values for every card, for example "-tt 70,80,75".
You can also set static fan speed if you specify negative values, for example "-tt -50" sets 50% fan speed. Specify zero to disable control and hide GPU statistics.
"-tt 1" (default) does not manage fans but shows GPU temperature and fan status every 30 seconds. Specify values 2..5 if it is too often.

-ttli reduce entire mining intensity (for all coins) automatically if GPU temperature is above specified value. For example, "-ttli 80" reduces mining intensity if GPU temperature is above 80C.
You can see if intensity was reduced in detailed statistics ("s" key).
You can also specify values for every card, for example "-ttli 80,85,80". You also should specify non-zero value for "-tt" option to enable this option.
It is a good idea to set "-ttli" value higher than "-tt" value by 3-5C.


CONFIGURATION FILE

You can use "config.txt" file instead of specifying options in command line.
If there are not any command line options, miner will check "config.txt" file for options.
If there is only one option in the command line, it must be configuration file name.
If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.
Place one option per line, if first character of a line is ";" or "#", this line will be ignored.
You can also use environment variables in "pools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in pools.txt.



SAMPLE USAGE

miningpoolhub:

NeoScryptMiner.exe -pool hub.miningpoolhub.com:20510 -wal Redhex.sample -psw x

nicehash:

NeoScryptMiner.exe -pool stratum+tcp://neoscrypt.eu.nicehash.com:3341 -wal YourBtcWalletAddress -psw x


FAILOVER

Use "pools.txt" file to specify additional pools. This file has text format, one pool per line. Every pool has 3 connection attempts.
Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.
If the first character of a line is ";" or "#", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing.
If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.
You can reload "pools.txt" file in runtime by pressing "r" key.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.
You can also use environment variables in "pools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in pools.txt.
You can also select current pool in runtime by pressing "e" key.


KNOWN ISSUES

- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions.
I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad.
Note that I can guarantee clean binaries only for official links in my posts on this forum. If you downloaded miner from some other link - it really can be a virus.
However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.



TROUBLESHOOTING

1. Install latest drivers.
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB.
5. Reboot computer.
6. Check hardware, risers.

Result and feedback

For stock cards I get the following speeds ("-powlim 50"):

RX480 - 930KH/s ("-a 2").
RX470 - 900KH/s ("-a 2").
RX580nitro+ - 1000KH/s ("-a 1").
Fury Nano - 1350KH/s.
390X - 1150KH/s.
270X - 450KH/s.
380X - 720KH/s.
280X - 825KH/s.
RX460 - 380KH/s.
Vega64 - 2200KH/s.
Fury X - 1530KH/s (user reported).

poslano v temi :: Claymore's NeoScrypt AMD GPU Miner v.1.2 (Win)
Pes :: 02.04.2020 ob 20:18
Zealot/Enemy (z-enemy) NVIDIA GPU miner.
x16rv2, x16r, x16s, Bitcore, Phi1612, Xevan ,Tribus , x17, c11, AeriumX, XDNA(hex), phi, phi2, skunk etc ..
=========================================================

Z-ENEMY 2.4 From: Dk & Enemy (z-enemy) NEW


IMPORTANT:

Changes:
- Fixed high CPU load with latest nVidia drivers, you can expect higher hashrate on the mining rigs with lower end CPUs
- Fixed nvml.dll load error with latest nVidia drivers

Windows:

Cuda 10.1; Cuda 9.1; Cuda 10.0; Cuda 9.2;


https://mega.nz/#F!cbAmRQCI!ZzRpmlx7tF4KGIRcT7AWiw


_________________________________________________________________________ ______________________

Z-ENEMY 2.3 From: Dk & Enemy (z-enemy)

Changes:
- Performance improvement: +2-3% x16rv2 algo


_______________________________________________________________________________ ____________________

Z-ENEMY 2.2 From: Dk & Enemy (z-enemy)

IMPORTANT:

Changes:
- Added x16rv2 algo (Upcoming Ravencoin hardfork 1st Oct.)
- Added support for secure stratum+ssl connections. New --no-cert-verify key.
(Disable certificate errors check for ssl connections)
- Fixed GPU data error in json api (/hwinfo)
- Fixed phi2 bug on Cuda 10.1



=====

IMPORTANT: Ravencoin is switching to the new x16rv2 algorithm on October 1st. There will be a new version of our miner z-enemy-2.2 with x16rv2 released in advance before the hard fork date .

=====

Z-ENEMY 2.1 From: Dk & Enemy (z-enemy)

IMPORTANT:


This version includes a new way to manage and monitor the miner.

Changes:
- Performance improvements: +4-5% most algos (x16r, x16s, x17, hex, bitcore, bcd...)
- Stability improvements


_______________________________________________________________________________ ___________________

Z-ENEMY 2.00 From: Dk & Enemy (z-enemy)

This version includes a new way to manage and monitor the miner.



New features:
- Added new HTTP JSON API (see json_api_help.txt for the details), available at port 4067 by default
- Added web control panel with real-time monitoring and charts.
The UI is responsive and should be looking well on most mobile phones and tablets.

Other changes:
- The miner informs about API servers (both Telnet and HTTP) being started
- You can now disable both servers with --api-bind=0 and --api-bind-http=0 respectively
- Minor bugfixes and stability improvements

Notes:
- For HTTP server --api-allow command line option isn't having any effect (for now?)


_______________________________________________________________________________ _________
Z-ENEMY 1.28 From: Dk & Enemy (z-enemy)

IMPORTANT:


Performance improvements of 1.28 compared to previous version (1.27):
- Bitcoin Diamond +7-8%, Hex 4-5% and +3-5% for x16r/s, x17, bitcore, c11, sonoa, etc...

Other changes:
- Added --no-nvml switch to disable NVML monitoring (useful to reduce load on low end CPUs)
- After several tests we recommend using intensity 22 on 1080ti cards on x16r algo (and perhaps others)



_______________________________________________________________________________ _____



Z-ENEMY 1.27 From: Dk & Enemy (z-enemy)

IMPORTANT:


Performance improvements:
Up to +3-4% for x16r/s and hex, +6-8% Bitcoin Diamond, 1-3% on others (x17, bitcore, c11, sonoa, etc...) on GTX 10x0 cards


_______________________________________________________________________________ _____


Z-ENEMY 1.26 ver.1 From: Dk & Enemy (z-enemy)

IMPORTANT:


Performance improvements:
- Up to +5-7% x16r/s, +7% bitcore, few percent on others (x17, c11, aergo ...) on GTX 10x0 cards.
- Hex algo +10% for GTX 10x0 cards and +2% for RTX 20x0 cards.

Other changes:
- Removed renesis algo
- Improved stability


_______________________________________________________________________________ _____


Z-ENEMY 1.25 ver.1 From: Dk & Enemy (z-enemy)

IMPORTANT:

Performance improvements in x16, x17, c11, bitcore, BCD, aergo, sonoa and hex:
- +10% or more for RTX 2080/2080ti/2070 cards
- +3-7% for GTX 1080Ti/1080/1070ti and lower cards

Bugfixes:
- Reduced CPU usage.


_______________________________________________________________________________ __________

Z-ENEMY 1.24 ver.3 From: Dk & Enemy (z-enemy)

IMPORTANT:

- Major optimizations for skunk, polytimos and phi
- Minor optimizations for hex and x16r/s, tribus.
- Massive performance boost for RTX 2080/2080ti/2070 in many algorithms.

Other:
- Highlighted hardware stats reporting, colored GPU temperatures (green/yellow/red)
- Added Volta architecture support
- Important update(1.24 ver.2): Fixed multi-gpu crash bug (skunk and polytimos)
- Important update(1.24 ver.3): Fixed reduced poolside hashrate ( XDNA : hex algo)



Z-ENEMY VER 1.23 From: Dk & Enemy (z-enemy)

IMPORTANT:

- First wave of performance optimizations for RTX 2080 and 2080Ti series up to 10-20% in various algos x16,x17,c11,hex,bitcore,xevan...)
- Minor performance optimizations for older cards (10x0)
- Fixed tribus out of memory bug (now it's possible to run it with higher intensities)
- Removed --tlimit and --plimit options
- Added --max-temp --resume-temp options



Z-ENEMY VER 1.22 From: Dk & Enemy (z-enemy)

IMPORTANT:

- Experimental CUDA 10 support: Higher speeds and stability, support for new RTX2080 & 2080 Ti cards
- Performance improvements: 2-5% for most algos (Hex, X16, X17, Bitcore, C11, etc..)

Cuda 10 version 32 & 64 performs faster in most algos ... Update you Nvidia drivers - minimum (ver. 415+)
Important. This is the first basic build for Cuda 10, please leave feedback in our channel #z-enemy-122test


Z-ENEMY VER 1.21a
From: Dk & Enemy (z-enemy)

IMPORTANT:

- Performance and stability improvements, few bugs fixed.
- Added uptime reporting.

Same as with previous release, 32 bit version performs faster in some algos ...


Z-ENEMY VER 1.20 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:

- Major performance improvements: 5-10% in various algos
- Bitcoin Diamond: Support for the new famous top algorithm at high speed, 20-30% higher than the current ones.

Same as with previous release, 32 bit version performs faster in some algos (x16/x17 etc) ...

Enjoy [​IMG]


Z-ENEMY VER 1.19 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:

- Major performance improvements: 5-7% in various algos (x16 ,x17 , bitcore, c11 , hex , etc ..)
- Stability improvements

32-bit version seems to be faster in some algos again, feel free to test it !




Z-ENEMY VER 1.18 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:

Greetings! We're releasing an updated version of our mining software with some bugfixes and other changes:

- Major performance improvements: 10-15% for Xevan (+ fixed reduced hashrate issue from 1.17)
- Minor performance improvements for other algos
- Stability improvements for XDNA


Z-ENEMY VER 1.17 (PUBLIC) From: Dk & Enemy (z-enemy)

IMPORTANT:

Greetings, fellow miners! We're releasing an updated version of our mining software with some speed inside:

- Major performance improvements: 5-10% for X16R & X16S, XDNA (hex), x17, Bitcore(BTX), c11, Sonoa, Renesis, Aergo
- Lower end cards like 1050/1060 will see additional few % (yes, a bonus)
- The miner no longer depends on memory, it allows to run memory clock at +0 or -500 MHz without performance loss.

Happy mining!


================================

Z-ENEMY VER 1.16 (PUBLIC)

IMPORTANT:

zealot/enemy-1.16 (z-enemy) From: Dk & Enemy

- Performance improvements:+7-10% hex(XDNA),+5%-7% x16r&s, few % for other algos (x17, c11, sonoa, renesis, aergo)
- Experimental feature: intensity limit increased (most algos now allow intensity up to 25, test at your own risk)


Z-ENEMY VER 1.14 (PUBLIC) NEW

IMPORTANT:

For Windows:
zealot/enemy-1.14 (z-enemy) From: Dk & Enemy

- Major performance improvements:
(+10% x16), (+15-25% Tribus), (+10% x17, C11, PHI1612, Aergo, Sonoa), (+5%Xevan, Phi, Poly)
- Command line options: --api-remote is now working as intended ("quit" and "switchpool" didn't work before)
- Stratum protocol: client.reconnect is now working as intended (for miningrigrentals users)


Z-ENEMY VER 1.12a (PUBLIC)

IMPORTANT:

For Windows Cuda 9.2 :
zealot/enemy-1.12a (z-enemy) From: Dk & Enemy

- Improved phi2 performance: +4-5% (up to 5 Mh/s for 1070ti, up to 7.5 Mh/s for 1080ti)

- Minor performance improvements for other algos




LAST Z-ENEMY VER 1.12 (PUBLIC)

IMPORTANT:
For maximum performance make sure you have latest drivers (ver. 398+)

zealot/enemy-1.12 (z-enemy) From: Dk & Enemy

- Minor performance improvements: x17 , x16r, x16s, c11 , bitcore, aeriumx and other ...
- New algos: SONOA ( -a sonoa) and PHI2 ( -a phi2)


Z-ENEMY VER 1.11 (PUBLIC)

For Windows (Cuda 9.1)
zealot/enemy-1.11 (z-enemy) From: Dk & Enemy

- Performance improvements: x17 (+4-8%), x16r&s (+1-3%) , very fast Phi1612 and other ...
- Fast start on multi gpu-rigs
- GPUs limit increased to 24
- AeriumX(AEX) - the miner supports Aerium new swap algo (-a aeriumx), starting 4th June.
- Added: C11(-a c11) basic and fast x64(ver.4) , Skunk(-a skunk) basic , improved TimeTravel8(-a timetravel) and Polytimos (-a poly)


Z-ENEMY VER 1.10 (PUBLIC)

For Windows (Cuda 9.1)
zealot/enemy-1.10 (z-enemy) From: Dk & Enemy

- Fixed compatibility issues that resulted in performance degradation with some non-yiimp pools. Now you'll see the expected hashrate on them (suprnova).

- Kernels speed improvements : (1.09a vs 1.10) +1-2% total (all algos) and (1.09b vs 1.10) +1-2% for x16r &x16s.

- Support & impove new algo : Tribus (-a tribus) , recommended intensity for Tribus 20-21. +5% speed vs 1.09b ( Service release)



First time or troubleshooting x16:
- First time users - ver. 1.12 works on Cuda 9.1&9.2 and it is recommended to make sure you've updated your NVIDIA drivers. You can find drivers here: 398+++
- Next important thing is intensity. We recommend intensity -19 at first, however if your PC has 8GB or more, fast SSD, and big swap file on it you may use -20/21.
- X16r algo is very wild and eratic. *Very important* Make sure to have enough power reserve on PSU. Please be sure you have a minimum 20% headroom on your PSU or set your PL on 70-80% usage.
- Using +core and +mem is useful but, use no OC at first until you verify stability.


Performance and fine tuning x16:
- This release z-enemy 1.12 is reported to be more stable when it using higher PL (90-110%) and +core and +memory overclocking, feel free to experiment with it.
- Updating drivers can provide more gains
- Recommended intensity is 20, set 21 only if you know what you are doing. ( 16GB RAM or/and good SWAP file on SSD) Use caution
- Recommended memory 0 or +
- Recommended core +50+150 ( 1800-1900MHz 1080 Ti)
- Overclock slowly and allow plenty of time to verify stability (12-24hrs) before making anymore adjustments. x16r is a very chaotic algorithm so just because it works for 1 hr doesn't mean you can't crash over longer time. Sometimes hash order can lead to 2000+mhz and crash system. Keep in mind – overclocking is always at your own risk!
- Yiimp pools recommend manual diff (-p d=16) - for small farms or (-p d=48 ) - for good farms like 5-6 1080 Ti If you need to name your rigs as well as set diff you may try -p rigname,d=16

Diff x16 can be calculated by mutliplying the following:
Number of 1060's multiplied by 3-4
Number of 70ti's or 80's multiply by 4-8
Number of 80ti's multiply by 6-12

example: If you have 3 1060's then diff would be 9-12
if you have 8 70ti's then your diff would be 48-96



Dev fee:
- low dev fee 1%
- Dev fee will start randomly when miner is first started. After 1% of time mined then automatically switches back to user pool.

Information about x16:

Every block contain 16 random algos.

All algos have Fast, Medium and Slow speeds so depending on the order and what speeds they are will determine your hashrate at any given time.

Fast: Blake (Blk),Bmw512(Bmw), Keccak (Kck), Skein(Ske), Shabal(Shb), Sha512(Sha)
Medium: Jh512 (Jh5), Luffa (Luf), Cube(Cub), Shavite (Shv), Fugue (Fug), Whirlpool (Wrl)
Slow: Groestl (Gro), Simd (Smd), Echo (Ech), Hamsi (Ham)

Example:
Block 181085, difficulty 20228.532
Hashorder: EchFugBmwShaJh5FugShvEchSmdBmwHamWrlJh5KckSkeHam

Means first algo is Slow Echo (Ech)> next Medium Fugue (Fug) > …> last Hamsi (Ham). The more fast algos in a block is what drives miner speed to the moon! (more MH)


Samples:

Yiimp pools:

z-enemy -a phi -o stratum+tcp://pool.bsod.pw:6667 -u LQCifDiNVXjM_your_wallet_CUqZJBa75p11 -p x

z-enemy -a x16r -o stratum+tcp://yiimp.eu:3636 -u RWgpF9GefjD_your_wallet_1gQmQjpYtYt.GTX950 -p d=3 -i 19

z-enemy -a bitcore -o stratum+tcp://yiimp.eu:3556 -u 1D2dKSprpK_your_wallet_1wa8b2LnJ826uf -p x -i 20

Suprnova pool:

z-enemy -a x16r -o stratum+tcp://rvn.suprnova.cc:6667 -u your_Login.your_worker_name -p x -i 20




FAQ:

I cannot start miner, it says I'm missing msvcr120.dll?
Download and reinstall drivers from http://www.nvidia.com/Download/index.aspx

My miner crashed - cuda error in funk `cuda_check_cpu_setTarget` why ?
This error is caused by overclocking, lower your GPU and VRAM clocks.

Latest drivers recommended?
Yes however, sometimes a new driver can cause an issue and using a previous version may work better. You will need to verify. We recommend at least NVIDIA drivers of 390+++ or 398.xx

What is restart-fix.reg in windows download folder?
This file will fix pop-up window and lets the miner restart after crash. Run once.

How many GPU's can I run?
We have confirmed reports on 19 cards

Is there an easy way to auto restart miner if it crashes?
Yes, check our samples *.cmd file in windows build. Like:
tart
z-enemy -a phi -o stratum+tcp://pool.bsod.pw:6667 -u LQCifDiNV_YOUR_WALLET_F3CUqZJBa75123 -p x
goto start

Does z-enemy 1.12 not support api?
Yes, try --api-remote and/or --api-allow= ( simple 0/0 )

z-enemy no supports ccminer.conf default value loading from .conf file ?
z-enemy support config.json

poslano v temi :: Zealot/Enemy (z-enemy) NVIDIA GPU miner (ver2.4 - support x16rv2 Raven)
Pes :: 29.03.2020 ob 15:18
EWBF Cuda Equihash Miner v0.6

Greetings!
It is based on my last Zcash miner and almost completely repeats it.
Now closer to the topic:
* Parameter "solver" is disabled.
* Solver for equihash 200,9 has been deleted.
* Solvers for Equihash 192,7, 144,5, 96,5 and 210,9 has been added
* Added timestamps in the output to the screen and to the log file.
* Argument --algo is added, allow you to select Equihash variant allowed values 144_5, 192_7, 96_5, 210_9, zhash, aion. This parameter is mandatory.
* Argument --pers is added, allow you to set personalization string (8 charachters) for equihash algorithm. This parameter is optional. Equihash by default uses the string "ZcashPoW", many other coins also use this string, but not all, some coins use their own string, and these are all differences, so for some coins, you need to set the --pers option to the required string, for example, Zero coin: uses the string "ZERO_PoW" and for mining this coin you need to pass arguments --algo 192_7 --pers ZERO_PoW ....
Fee is presented and by default 2%, argument --fee is presented too.

v0.6
* Fixed situation where the api socket did not close during the exit..
* Increased time-outs during stratum authorization and subscription.
* 144_5, 192_7, 96_5 now faster.
* 144_5 now uses less vram, ~1.63GB (This should be useful for 2GB cards).

v0.5
* 96_5 fixed the problem with cropped performance on fast (1080ti, Titan) gpu.
* 144_5 Speed up by 3-15% depends on the hardware.
* 210_9 Speed up by 2%.
* 210_9 Fixed "low difficulty shares" problem, on Aion pools.
* 210_9 can now be used via --algo 210_9, I recommend using --algo aion for Aion mining, this will help you avoid problems with the wrong personalization string.
* Added option --intensity, this option will not increase performance, only slightly reduce the gpu usage, if you set it to 1. Works like --cuda_devices argument,
for example: --intensity 64 64 1 64 64 will apply the intensity 1 to the device with id 2.
Special features (These features are added for specific projects,do not use these parameters on conventional pools):
* Added option --pers auto, Allow the pool to manage the personalization string. (Profit switching). (http://zergpool.com)
* Added option --algo 144_5_EXCC_D For ExchangeCoin.

Known issues (mostly will be fixed)
* Equihash 96_5 Can be slower in cuda 8 versions.
* Performance counters may display an incorrect speed during reconnection.

Expected performance:

96_5 uses ~1.6GB vram
1050ti ~7.8 KS/s
1060 ~14 KS/s
1070 ~20 KS/s
1080 ~25 KS/s
1080ti ~37 KS/s

192_7 uses ~2.5GB vram
1050ti ~8 S/s
1060 ~15 S/s
1070 ~22 S/s
1080 ~24 S/s
1080ti ~35 S/s

144_5 uses ~1.63GB vram
1050ti ~18 S/s
1060 ~30 S/s
1070 ~45 S/s
1080 ~50 S/s
1080ti ~75 S/s

210_9(aion) uses 1.2G vram
1050ti ~75 S/s
1060 ~130 S/s
1070 ~190 S/s
1080 ~210 S/s
1080ti ~320 S/s

Please note, that this is initial release, and it can be baggy or incompatible with many coins or pools.
Miner compiled with cuda 9.1 and cuda 8.0 for x64 linux and windows. Support devices with compute capability 5.0 and higher.

Windows https://mega.nz/#F!UbAiwKxY!9JKBtJXDs85boTU4bmjiew

Usage examples (batch files):
Basic Example:


Code:
miner --algo 144_5 --server SERVER_ADDR --port PORT --user USER --pass PASSWORD

Failover pools up to 8 pools:

Code:
miner --algo 144_5 --server SERV1 --port PORT1 --user USER1 --pass PASS1 --server SERV2 --port PORT2 --user USER2 --pass PASS2

poslano v temi :: EWBF's Cuda Equihash Miner v.0.6