in sodeluj na forumu, komentiraj, ocenjuj... Registriraš se v samo 10ih sekudah!
Bitcoin Slovenija

Zadnja sporočila

Pes :: 17.02.2020 ob 20:35
Hello everyone!

I've created a service for remote rig monitoring. First of all I made it for my own rigs but after time decide bring service to public because it's really useful

It called RIG cards and available here:!lLoGnYTS!QBVDXkm-S8GKbRdUzIiyiw

Basic functions:

Status of rigs with info for GPUs (temperatures, fan speeds, frequencies etc.) Data for each rig present on its own "card" (as I called it) where you can monitor params just looking to the website
Hashrate monitoring
Notifications to e-mail or Telegram messenger about different events like:
- Rig don't respond / Rig online again
- Temperatures of GPU out of range or back to range (limits can be set for each rig individually)
- Lost GPU on rig
- Rig was rebboted
Mobile-friendly version of the website, so you can easily check your rigs from smartphone
Rig rebooting on events like: overheating GPUs, low GPUs temperature, losing GPU on the rig
Remore rig reboot
Able to set personal temperature color ranges for rig


Hashrate monitoring Ready! notifications which corresponds to it (will be later)
Summary card with short status for all rigs, total hashrate, calculated profit, possible troubles
Actions like reboot on different events (for example, reboot when lost GPU) Done!
Other impovements (you can see more detailed tasklist below)

Here is some screenshots of service main page:

My main goal was to make easy in use service which main function is rigs monitoring and not so monstrous as some others.
I'll be happy to get any feedback, suggestions etc.

So, how it works?

First you need to download client application that you then will launch on the rig system.
Client app is just Windows Powershell script, so it's opensource, you can check contents and be sure so there no any viruses or other bad things. Besides it uses library from well-known Open Hardware Monitor to get info from GPU sensors.

View of client window:

Next you can add new rig from web-interface or during first launch of client app. Choose rig name, set number of GPUs, and temp. limits if wish.
BTW if you already added rig you can download preconfigured client for needed rig and just launch on system.

For launch the client app start the start_client.bat file (shortcut for this file you can then add to start on windows boot)

adding rig from web

adding rig from client app

Every two minutes client app sends rig data to server. If in 2 min period not received any data from rig, it will marked with "yellow" status (like warning). After next 2-3 minutes if still no rig activity - rig will marked as Offline "red" status and you'll get notification about it through choosen channels in settings.

Also each time when server got data from rig we check given parameters and if something wrong (for example lost GPU or overheating) we also send notification to you (of course if you enabled it).
Temperature limits you can set globally for all rigs (Account - Your Profile - Global settings) or for each rig individually by clicking coghwheel icon for rig you need.
Moreover depends on temp. levels values will be colored, so just taking a look you can check is there everything good with your rigs. You can set you own temperature ranges for each color.
Here is also nice trick with low t° limit: in most cases if something happens with miner on rig (unexpected close, can't connect to pool) GPUs stop working and their temperatures going down. So if find the appropriate value you'll receive notification of low temp and it will mean that GPU don't work normal!

How different statuses looks like:

Here is notifications examples (e-mail and Telegram):

For using client app you need to have .NET Framework 4.5 and Powershell 5 on your rig systems (Win 10 have them by default, on Win7 usually need to install).

Client has auto update function, but in next releases I add setting to disable auto update if you wish.

Hashrate monitoring

Details about hashrate monitoring you can find in post:

Hashrate monitoring

Now you can see miner hashrate on the rig cards.

It looks like this:

not sure is this is the best displaying of hashrate monitoring, so if you have any suggestions or comments about it - tell.

Notifications that depends on hashrate values don't implemented yet. Just displaying. Notifications maybe will be added some later after full debugging of hashrate monitoring feature, and finally if such monitoring is demanded by users.

Attention! The client gets the hashrate value directly from the miner (and not from the pool or from anywhere another)!

So in the settings of the rig, you need to select the type of miner used, and the miner on the rig can be configured accordingly - activate api (this can usually be made in a .bat file, and for some miners the API is activated by default and you don’t need to do anything).

You can select a miner when adding a new rig or editing an existing. This feature is also available when editing groups of the rigs.
Tab - Hashrate.

When setting a miner, you can also specify the port on which its api is available, if the port is different from the default.
Make attention! It's NOT a pool port!

There you can also see the parameters that need to be added to the miner’s launch line in the bat-file for activating api.
Anyway if something is not clear - just ask me! [​IMG]

At the moment, the following miners are supported:

List of supported miners:

Claymore's Ethereum Miner
PhoenixMiner Ethereum
SRBMiner Cryptonight
EWBF Equihash Miner

Ready for suggestions for adding any other miners [​IMG]
Tell me which miners you are using, which coins, pools and I'll try to add requested miners.

Info about hashrate value will be also displaying in the client app window (or if it is impossible to get data from the miner by some reason, will be displayed error message).

Remind that the client connects to the server every 100-110 seconds - so after changing any settings on the server, it takes some time for the client to receive them, and only after that monitoring will continue with the new rig configuration.

Of course for support hashrate monitoring, the client app has been updated - version is 0.7.3
(The update will occur automatically if you have not disabled the auto-update feature)

As usual, very waiting from you feedbacks about my service and hashrate monitoring functions in particular.
Tell how it works, maybe there are any difficulties or other.

List of supported miners:

Claymore's Ethereum Miner
PhoenixMiner Ethereum
SRBMiner Cryptonight
EWBF Equihash Miner

Ask if you want to see miner that don't added yet [​IMG]

How much?
It's totally free for now! No any limitations.
No any fees! And of course it is don't touch your miners.
It just collect info from hardware sensors to show you on web and send nortifications if any.

Known issues and bugs:

It's beta now so I don't except appearing bugs, I'll try to fix asap.
Notification about unexpected rig rebooting doesn't work (not implemented yet, thinking about better algorithm for it) done
Not working with P102-100 or P106-100 — it depends on mode of NVIDIA drivers, solution you can find below in FAQ
As I see, there no longer any issues here
On first launch of start_client.bat on Windows 10 if you unpacked by Windows Explorer you'll get Windows SmartScreen warning about unknown app - it's normal. There are no warnings if you will unpack zip with Total Commander for example or any other filemanager. As I understood, windows generate such warning every time if you first time start newest .bat which was downloaded from somewhere. And after some time if there no problems, app will be added to their database. You'll get SmartScreen warning only once, on the next launch of app you don't get warning.

To Do list:

Hashrate monitoring Done! and notifications (will be later)
Notification for unexpected reboot event done
Rig uptime and date/time of launch (for each rig on its card) done
Sort & order of rigs' cards done
Sort & order for GPUs on rig
Summary card with short basic information about all rigs, total hashrate, existing problems and other
Adding features to Telegram bot (like getting info for rig at request)
Addition Languages (russian and others)
Actions (like reboot) on different events, possibility to launch bat-file on event
Tasks from server to rig (reboot, shutdown)
Logo and favicon for website
Dark/night theme (maybe even posibility to set your own background image)
Integration with sonoff-tasmota devices through Mosquito servers (MQTT)


How I can use Telegram bot?
To start using you just need to send your secret key to him. Key can be found at Account - Your profile - Profile - Secret key
At this time bot can only send notifications to you, but in future I wish to add some functions

Is it possible to send notification to few Telegram accounts at the same time?
First make group in Telegram with few people. Then if you open screen with bot info, at the menu you can choose Add to group. After adding to group send next service message to bot:
/secret your_secretkey_here
Now bot will send notifications to group!

How much I need to pay for using service?
It's totally free. But if service come popular I will need to charge for it (to pay for servers and other stuff). But even in this case it will very cheap, 1 USD per month per rig for example (I don't thought seriously about it yet)

GPU NVIDIA P102-100 or P106-100 not showing
It's depends on mode of NVIDIA drivers works. By default it work in TCC mode and because of it Open Hardware Monitor library that I use to get info from sensors can't get these parameters. Solution is simple - switch drivers to WDDM mode.

Attention! With some new version of drivers, the described method no longer works.
An alternative method of grabbing info for such cards has been introduced (in most cases, you will not be required to make any actionsl). Details here.

According to the official NVIDIA website:
To change the TCC mode, use the NVIDIA SMI utility. This is located by default at Crogram FilesNVIDIA CorporationNVSMI. Use the following syntax to change the TCC mode:
nvidia-smi -g {GPU_ID} -dm {0|1}
0 = WDDM
1 = TCC

So you need go to the Crogram FilesNVIDIA CorporationNVSMI directory and from command line run such command for every card pointed it "number" (GPU_ID)

Or (but I'm not sure 'cause I haven't such GPUs) to switch all GPUs on the rig to WDDM mode you can run
nvidia-smi -g -dm 0

Time on rig cards is wrong
By default time on new accounts in UTC timezone. You can set your timezone at Account - Your profile - Timezone

How often data refresh on the page with rig cards?
For now data refresh every 30 seconds (but remind, rigs send data every two minutes). If needed you can refresh it immediately with refresh icon on the navbar. After 20 minutes of idle you session will stopped.

How is coloring the GPU temperature values? Is it possible to change it?
This coloring is not relating with temperature limits that you set for rigs to get notifications. It just for visual usability. It is possible to set your own temperature ranges for each color.
Default temperature ranges is:
1-35 °C - blue
36-60 - green
61-70 - yellow
71-80 - orange
81 и вышe - red

How I can enable the log file?
Logging is disabled by default. If you need it you must turn on it manually.

To enable log, you need to put -Log 1 into start_client.bat batch file.
Or, it can also be activated by editing the config.json configuration file, adding the parameter "log": 1

link: RIG cards and available here:!lLoGnYTS!QBVDXkm-S8GKbRdUzIiyiw

So, this thread is the only way to know all of the features of its services?
Checked on your website, it only showed login form and one only Nav Menu to register.

Good job, but may I'll try when next features added.


Hashrate monitoring (I'll plan to add Claymore, EWBF miners first) and notifications which corresponds to it
Summary card with short status for all rigs, total hashrate, calculated profit, possible troubles
Actions like reboot on different events (for example, reboot when lost GPU)
Other impovements (you can see more detailed tasklist below)

Good Luck

poslano v temi :: Rig cards - remote rig monitoring and notifications by email and Telegram
Pes :: 17.02.2020 ob 18:33
GMiner v1.96

GMiner - High-performance miner for AMD/Nvidia GPUs.

Supported algoritms:
- Ethash (Nvidia only)
- Ethash+Eaglesong (Nvidia only)
- Ethash+Blake2s (Nvidia only)
- Eaglesong (Nvidia/Amd)
- Cuckarood29/Cuckaroom29 (Grin) (Nvidia only)
- Cuckatoo31 (Grin) (Nvidia only)
- Cuckoo29 (Aeternity) (Nvidia/Amd)
- CryptoNightBBC (BBC) (Nvidia only)
- BFC (Nvidia/Amd)
- Cortex (Nvidia only)
- Cuckaroo29s (Swap) (Nvidia/Amd)
- Cuckarood29v (MoneroV) (Nvidia only)
- Blake2s(KDA) (Nvidia/Amd)
- Eaglesong (CKB) (Nvidia/Amd)
- Equihash 96,5 (MinexCoin) (Nvidia only)
- Equihash+Scrypt (Vollar) (Nvidia only)
- Equihash 125,4 (ZelCash) (Nvidia only)
- Equihash 144,5 (Bitcoin Gold, BitcoinZ, SnowGem, ZelCash) (Nvidia/Amd)
- Beam Hash (BEAM) (Nvidia/Amd)
- Equihash 192,7 (Zero, Genesis) (Nvidia/Amd)
- Equihash 210,9 (Aion) (Nvidia only)

- Watchdog (Automatically restart miner on GPU failure, loss of connection to pool, miner crashes)
- Failover pools (Automatically connect to failover pool when main pool unavailable, support unlimited number of failover pools)
- Power efficiency calculator (Show power consuming for each GPU, Sol/W)
- SSL stratum connection (optional)
- API / Telemerty

Fee is 0.65% for Ethash, 5% for BBC, 5% for Cortex, 3% for Cuckaroom29, 3% for BFC, 2% for all other algorithms

Performance on stock GPU settings:

ALGO COIN UNIT 1060 1660Ti 1070 1070Ti 1080 1080Ti 2060 2070 2080 RX570 RX580 VEGA56 VEGA64
Equihash 96,5 MNX KSol/s 15.3 24.7 28 39.5
Equihash 125,4 ZEL Sol/s 22.3 26.1 32.9 40.1 42.3 56.9 35.5 45.3 58.9
Equihash 144,5 BTG, BTCZ Sol/s 37.5 55.5 65 69 96 65.6 68 24 27 43
BeamHashII BEAM Sol/s 22.5 26.8 34.7 41.4 39.9 58.9 37.2 50 62.5 16
Equihash 192,7 YEC, ZCL Sol/s 21 30 37 39 54 36 52 14 17 26
Equihash 210,9 AION Sol/s 147 209 227 347
Cuckarood29 GRIN G/s 3.65 5.26 5.26 5.82 5.82 9.17 6.75 8.4 10
Cuckaroo29(s) XWP, XBG G/s 3.2 4.55 4.65 5.25 5.5 8 6 7.6 8.8 1.6 1.8 3.2 3.85
Cuckatoo31 GRIN G/s 0.86 0.96 1.64 1.33
Cuckoo29 AE G/s 3.53 4.75 5.22 5.65 5.75 8.66 6.53 8.12 9.5 1.88 2.07 3.2 4.4
BFC BFC H/s 84.04 133.09 124.28 134.52 136.90 206.19 155.47 193.33 226.19
Equihash+Scrypt VDS KSol/s 14 19.5 19.7 23.1 27 37.3 24 28.5 36.5
Cortex CTXC G/s 1.53 3.13
Ethash ETH MH/s 27.13 27.95 37.22
Eaglesong CKB MH/s 778 755 1150 300

- CUDA compute compability 5.0+
- Cuckaroo29 ~ 3.8GB VRAM
- Cuckatoo31 ~ 7.68GB VRAM
- Cuckoo29 ~ 3.8GB VRAM
- Equihash 96,5 ~0.75GB VRAM
- Equihash 144,5 ~1.75GB VRAM
- Beam Hash ~2.9GB VRAM
- Equihash 192,7 ~2.75GB VRAM
- Equihash 210,9 ~1GB VRAM
- CUDA 9.0+

+ improved cuckaroom29 performance(up to +5-6% dependent on GPU)
+ display devfee on startup

+ improved cuckaroom29 performance

+ added Cuckaroom29 algorithm (DevFee is 3%), use --algo grin29 for hardfork autoswitch (Watchdog should be enabled)
+ added Cuckarood29v algorithm (MoneroV coin, DevFee is 10%)
+ fixed "No shares" bug for Eaglesong when extranonce length not equal to 4 (#47)

+ improved performance for CryptoNightBBC on some GPUs (1080, 1080ti, mining edition cards)
+ improved cleanJobs behavior for BBC stratum, should improve hashrate on pool side

+ added CryptoNightBBC algorithm for Nvidia GPUs (BBC coin)

+ added solo mining support for kadena

+ fixed performance regression for Cuckatoo31 algorithm on mining edition GPUs (P104-100)

+ added blake2s support for AMD GPUs

v1.01 release coming soon, release scheduled to September 28th-29th

+ optimize GPU utilization (+1-5% sol/s for all algorithms)
+ optimize CUDA kernel for Equihash 144/5 (+1% sol/s)
+ fixed "Mailformed server message" stratum client's error on some rigs with 6+ GPU's
+ decrease CPU usage

Expected performance:
MSI GTX 1080 SEA HAWK EK X 8GB ~50 Sol/s stock / ~57 Sol/s OC
EVGA GTX 1080 Ti Founders Edition 11GB ~71 Sol/s stock / ~76 Sol/s OC
Gigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~75 Sol/s stock / ~82 Sol/s OC

Download links:!QW5gXahI!h1blmR5suTAWQ3viJJtigw

Usage examples:

1) Bitcoing Gold

miner --algo 144_5 --pers BgoldPoW --server eu.btgpool pro --port 1445 --user YOUR_BITCOING_GOLD_WALLET.rigName --pass x


miner --algo 192_7 --pers ZERO_PoW --server zer-eu.forgetop com --port 2052 --user YOUR_ZERO_WALLET.rigName --pass x

3) Failover pool

miner --algo 144_5 --pers BgoldPoW --server eu.btgpool pro --port 1445 --user YOUR_BITCOING_GOLD_WALLET.rigName --pass x --server btg.2miners com --port 4040 --user YOUR_BITCOING_GOLD_WALLET.rigName --pass x

poslano v temi :: GMiner v1.96 Equihash/CuckooCycle/Ethash/Eaglesong/Blake2s
ThinZoneKeto :: 13.02.2020 ob 11:13
Thin Zone Keto

Weight Lose Diet is stupendous for beginners. Weight Loss Diet will require effort and dedication on your part. As you'll see, this really caters to all your Weight Lose wants. Even so, pay attention because you just may learn that from this installment.

Site :

poslano v temi ::
Pes :: 10.02.2020 ob 18:43
EWBF Cuda Equihash Miner v0.6

It is based on my last Zcash miner and almost completely repeats it.
Now closer to the topic:
* Parameter "solver" is disabled.
* Solver for equihash 200,9 has been deleted.
* Solvers for Equihash 192,7, 144,5, 96,5 and 210,9 has been added
* Added timestamps in the output to the screen and to the log file.
* Argument --algo is added, allow you to select Equihash variant allowed values 144_5, 192_7, 96_5, 210_9, zhash, aion. This parameter is mandatory.
* Argument --pers is added, allow you to set personalization string (8 charachters) for equihash algorithm. This parameter is optional. Equihash by default uses the string "ZcashPoW", many other coins also use this string, but not all, some coins use their own string, and these are all differences, so for some coins, you need to set the --pers option to the required string, for example, Zero coin: uses the string "ZERO_PoW" and for mining this coin you need to pass arguments --algo 192_7 --pers ZERO_PoW ....
Fee is presented and by default 2%, argument --fee is presented too.

* Fixed situation where the api socket did not close during the exit..
* Increased time-outs during stratum authorization and subscription.
* 144_5, 192_7, 96_5 now faster.
* 144_5 now uses less vram, ~1.63GB (This should be useful for 2GB cards).

* 96_5 fixed the problem with cropped performance on fast (1080ti, Titan) gpu.
* 144_5 Speed up by 3-15% depends on the hardware.
* 210_9 Speed up by 2%.
* 210_9 Fixed "low difficulty shares" problem, on Aion pools.
* 210_9 can now be used via --algo 210_9, I recommend using --algo aion for Aion mining, this will help you avoid problems with the wrong personalization string.
* Added option --intensity, this option will not increase performance, only slightly reduce the gpu usage, if you set it to 1. Works like --cuda_devices argument,
for example: --intensity 64 64 1 64 64 will apply the intensity 1 to the device with id 2.
Special features (These features are added for specific projects,do not use these parameters on conventional pools):
* Added option --pers auto, Allow the pool to manage the personalization string. (Profit switching). (
* Added option --algo 144_5_EXCC_D For ExchangeCoin.

Known issues (mostly will be fixed)
* Equihash 96_5 Can be slower in cuda 8 versions.
* Performance counters may display an incorrect speed during reconnection.

Expected performance:

96_5 uses ~1.6GB vram
1050ti ~7.8 KS/s
1060 ~14 KS/s
1070 ~20 KS/s
1080 ~25 KS/s
1080ti ~37 KS/s

192_7 uses ~2.5GB vram
1050ti ~8 S/s
1060 ~15 S/s
1070 ~22 S/s
1080 ~24 S/s
1080ti ~35 S/s

144_5 uses ~1.63GB vram
1050ti ~18 S/s
1060 ~30 S/s
1070 ~45 S/s
1080 ~50 S/s
1080ti ~75 S/s

210_9(aion) uses 1.2G vram
1050ti ~75 S/s
1060 ~130 S/s
1070 ~190 S/s
1080 ~210 S/s
1080ti ~320 S/s

Please note, that this is initial release, and it can be baggy or incompatible with many coins or pools.
Miner compiled with cuda 9.1 and cuda 8.0 for x64 linux and windows. Support devices with compute capability 5.0 and higher.


Usage examples (batch files):
Basic Example:

miner --algo 144_5 --server SERVER_ADDR --port PORT --user USER --pass PASSWORD

Failover pools up to 8 pools:

miner --algo 144_5 --server SERV1 --port PORT1 --user USER1 --pass PASS1 --server SERV2 --port PORT2 --user USER2 --pass PASS2

poslano v temi :: EWBF's Cuda Equihash Miner 0.6
Boco123 :: 09.02.2020 ob 15:27

Pi network je aplikacija, ki omogoča rudarjenje kriptovalute na mobilnem telefonu. Na voljo je za Android in IOS in celotna stvar deluje na njihovem strežniku tako, da je poraba baterije res minimalna. Projekt zajema 3 faze razvoja:
- 1.faza (beta verzija) rudarjenje je že možno, uvaja se različne izboljšave, prenos Pi-jev med uporabniki
- 2.faza (testnet) bo okoli marca 2020, uvedel se bo Node software, pripravljalo se bo na zadnjo fazo
- 3.faza (mainnet) bo okoli maja 2020 in bo sla kriptovaluta "live" - na borzo

Projekt je trenutno v prvi fazi število uporabnikov pa se stalno povečuje in znaša že okoli 3m. Urni zaslužek kripto valute se bo razpolovil, ko bo aplikacija dosegla 10m uporabnikov zato je priporočljivo, da se čim prej prijavite in začnete rudariti.
Vse kar morate narediti je to, da se registrirate ter vsakih 24ur pritisnete gumb za pričetek novega cikla rudarjenja. Pomembno je tudi, da v primeru da ste za registracijo uporabili telefonsko številko le to verificirate. Pri registraciji boste morali navesti kdo vas je povabil zato bi mi veliko pomenilo, če bi za invitation code uprabili McStrudl, ter tako obema prinesli večji zaslužek.

Link do aplikacije:

poslano v temi :: Pi network - rudarjenje kriptovalut na vašem mobilnem telefonu
Pes :: 08.02.2020 ob 20:15
Bminer is a highly optimized cryptocurrency miner that runs on modern AMD/NVIDIA GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above). Bminer is one of the fastest publicly available miners today -- we use various techniques including tiling and pipelining to realize the full potentials of the hardware.

Bminer also comes with REST APIs to facilitate production deployments (e.g., mining farms).
Bminer supports mining Equihash-based coins (e.g., Zcash) with 2% of devfee.
Bminer supports mining Zhash / Equihash 144,5 based coins (e.g. BitcoinGold, BitcoinZ) with 2% of devfee.
Bminer supports mining Ethash-based coins (e.g., Ethereum) with 0.65% of devfee.
Bminer also supports dual mining mode - mining Ethash-based coins (e.g. Ethereum) and Blake14r-based coins (e.g. Decred) / Blake2s-based coins (e.g. Verge) at the same time. Devfee for the dual mining mode is 1.3%, and the second coin (e.g. Decred/Verge) is mined without devfee.
Bminer supports mining Tensority-based coins (e.g., Bytom(BTM)) with 2% of devfee.



Grin31 mining on stock settings
2.60 G/s on RTX 2080Ti
1.65 G/s on RTX 2080
1.55 G/s on GTX 1080Ti
0.95 G/s on GTX 1070

Grin29 mining on stock settings
11.2 G/s on GTX 2080Ti
8.6 G/s on GTX 2080
7.8 G/s on GTX 1080Ti
7.15 G/s on P102
4.8 G/s on GTX 1070
4.10 G/s on GTX P104
3.30 G/s on GTX 1060 6G

AE mining on stock settings:
11.8 Sol/s on GTX 2080Ti
8.90 Sol/s on GTX 2080
7.40 Sol/s on GTX 1080Ti
4.7 Sol/s on GTX 1070
3.4 Sol/s on GTX 1060 6G

Beam mining on stock settings
30 Sol/s on GTX 1080Ti
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

Equihash mining on stock settings
735-745 Sol/s on GTX 1080Ti
450-460 Sol/s on GTX 1070
315-325 Sol/s on GTX 1060
Equihash 144,5 (Zhash) mining on stock settings
61 Sol/s on GTX 1080Ti
25 Sol/s on GTX 1060
Ethash mining on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill: 46.7 MH/s
Without OhGodAnETHlargementPill: 32.2 MH/s
Dual mining using automatic tuning (default) on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill:
ETH 46 MH/s and DCR 1000 MH/s
ETH 46 MH/s and XVG 1770 MH/s
Without OhGodAnETHlargementPill:
ETH 32 MH/s and DCR 2200 MH/s
ETH 32 MH/s and XVG 3750 MH/s
Bytom mining on stock settings:
4650 H/s on GTX 1080Ti
2850 H/s on GTX 1070
1800 H/s on GTX 1060 6G

Secure and reliable

SSL support
Automatic reconnects to recover from transient network failures
Automatic restarts if GPUs hang

Operation friendly

Comes with REST APIs to facilitate production deployments


Download and extract Bminer into a folder (e.g. C:bminer or /home/bminer)
Depending on the coins that you want to mine, find the corresponding script in the folder. For example, the corresponding script is mine_grin29.bat (on Windows) or (on Linux) when mining Grin using the Cuckaroo29 algorithm.
Change the address and account information in the script.
Run the script and Enjoy mining


Windows x64:

Release notes

16.0.3 (Current)
Improve performance and stability of the Cuckaroo29m miner.
Fix fidelity issues of the Cuckaroo29m miner.

Performance improvement on the Cuckaroo29m miner.

Fix the Cuckaroo29m miner fails to start on Turing-based cards or cards that have only 4G memory.
Fix the Cuckaroo29m miner submits shares that have low difficulty.
Performance improvement on the Cuckaroo29m miner.
Initial support for the Cuckaroo29m algorithm.

Improve the performance of Beam bminer for RTX cards.
Experimental support for dual-mining Ethash and the Eaglesong algorithm.

Improve the performance of automatic tuning of dual mining parameters.

Add an API to stop the miner.

Improve the performance of BeamHashII algorithm on RTX cards.

Improve the performance of BeamHashII algorithm.

Fix the regression on the BeamHashII fails to start on GTX 2060.

Support for the BeamHashII algorithm.

Fix the regression that the Cuckaroo29d miner fails to start on RTX-series cards.

Improve the performance of the miner of Cuckatoo31.
Increase the dynamic ranges of -intensity for older machines to fully utilize the GPUs (at the cost of a slight performance loss).

Improve the performance of Cuckaroo29d / Aeternity.
Support 4GB cards for Cuckaroo29d.
Fix the regression that the Cuckaroo29d miner fails to start on Windows.

Improve the performance of the Cuckaroo29d miner.

Improve the stability of the Cuckaroo29d miner.
Reduce the CPU usage of Cuckaroo29d miner.
Support 5GB cards for Cuckaroo29d.

Improve the performance of the Cuckaroo29d algorithm.
Fix the issue that the Cuckaroo29d failed to start for Turing-based cards.

Support the cuckaroo29d algorithm

Fix invalid shares ETH + VBK when using multiple cards.

Fix the regression that Cuckaroo29 fails to work on Turing cards.
Significantly improve the performance of ETH / VBK dual mine.

Improve the performance of the Cuckatoo algorithm.
Support dual-mining ETH and VBK.
Add the parameter -version to output the version and exit.

Improve performance of Cuckaroo29 / Aeternity.
Improve compatibility on Windows
Add an experimental flag --fast to improve the performance for Cuckaroo29 / Aeternity, but it might lead to unstability on some systems

Slightly improve performance of Cuckaroo29 / Cuckatoo31.
Reduce CPU usages of Cuckatoo31.
Fix the regressions of Cuckaroo29 on RTX cards.
Fix the incorrect reportings of Ethash speed to the mining pools.

Improve the performance of Cuckaroo29 by 5%.
Slightly improve the performance of Cuckatoo31.
Improve compatibility on Windows.

Improve performance and stability of Cuckatoo31.
Slightly improved performance of Ccukaroo29.
Reduced the chance of reject and stale shares of CC29/CC31.
Support RTX 2080/2070 for Cuckatoo31. RTX 2080 expected speed 1.45G/s.

Improve performance of Cuckaroo29 / Cuckatoo31.
Experimental support Cuckaroo29 on AMD cards (ROCM only)
Improve compatibility on Windows.
Fix the regression on UI dashboard.
Reduce reject rate of Cuckaroo29 / Cuckatoo31.

Improve the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

Fix compatibility issues on Windows.

Support 8G cards for Cuckatoo31 (except for Windows 10).
Improve stability of the Cuckatoo31 solver.

Improve the performance of Cuckaroo29.
Reduce the likelihood of rejected shares of Cuckatoo31.
Support Nicehash for both Cuckaroo29 / Cuckatoo31.

Improve the performance for Cuckatoo31.
Support 2080Ti for Cuckatoo31.
Reduce the CPU usages for Grin / Aeternity by default.
Reduce the likelihood of rejected shares for Cuckatoo31.

Experimental support for Cuckatoo31 on 1080Ti.
Fix the regression where ETH dual mine fails to start on Windows.
Improve performance on mining Aeternity.
Support tweaking the CPU usage for mining AE / Grin with the -intensity flag.

Improve performance of AE / Grin on Turing cards.
Improve performance of AE / Grin on lower-end CPUs and Windows platforms.
Support mining beam on leafpool and nicehash.
Fix the regression where /api/v1/devices is occasionally unresponsive.

Improved Grin/AE mining speed.
Print fidelity information. It is a measure of the luck/miner correctness. Overtime, the number should be close to one. For miners running over two hours, the fidelity should be at least greater than 0.95.
Improved multi-card performance on Windows.
Improved the miner fidelity by 8%-10%. You will not see big local difference but you will see roughly 10% higher speed on the pool side.
Reduced reject chance.
Fixed equihash issue.
Fix the regression that the equihash miner fails to start on Windows.


Improve the performance of Turing GPUs when mining Grin.
Reduced rejected share chance for all cards.


Support mining Grin / AE with 4G or 5G of video memory. (P104 only on Linux).


30% performance improvement on Grin and AE.
Reduce the likelihood of rejected shares.


Optimize CPU usage.
Fix compatibility issues with and
Experimental support for Turing GPUs.
Allow bminer to run with older NVIDIA drivers.


50% performance improvement on Aeternity.
10% performance improvement on Grin.
Support 8GB cards on Windows 10.
Support SSL connections for Grin.


Experimental support mining Grin on NVIDIA GPUs. Currently bminer only supports the Cuckaroo29 algorithm.
100% performance improvement on the beam miner on NVIDIA GPUs compared to 11.4.1.
Bug fixes

Support AMD Crimson driver mining beam

Experimental support mining beam with AMD cards


Improve the performance of Aeternity for 6GB cards
Support mining beam over beepool
Output solution/s instead of nounce/s when mining beam


Experimental support for Beam.


Experimental support for Aeternity.


Support ETH/BTM dual mine.


Fix `-devices value` option bug in 10.6.0.
Fix a bug in `GET /api/v1/status/device` api.


Require CUDA 9.2 or above for this version.
Substantially increase BTM mining speed, e.g. 4650H/s on 1080Ti now.


Require CUDA 9.2 or above for this version.
Substantially increase BTM mining speed, e.g. 4500H/s on 1080Ti now.
Maximum temperature is monitored more precisely.
Support BTG mining on pool.


Add `-pers auto` option to support pools (e.g. to automatically switch personalization string for equihash144,5 mining.


Make API robust and accessible even when GPUs are hung.
Support ethproxy protocol pools, such as dwarfpool, to display worker names.


Support all the other Equihash 144,5 based coins besides BTG, using equihash1445 scheme and -pers config.


Fix performance regression in BTM mining.


Support mining Zhash (Equihash with parameter set 144,5) based coins.
Substantially increase BTM mining speed again (up to another 30%).
Support reported hashrate feature on ETH pools.


Substantially increase BTM mining speed (up to 30%).
Fix editing problems of .bat files on windows.
Add scheme suggestions in scripts for ETH mining.


Experimental support for mining Bytom (BTM).
Optimize the performance of automatic tuning in dual mining mode.
Start REST APIs much faster than previous versions.
Improve compatibility of mining Ethereum on Nicehash pool.


Support a dual mining mode for Ethereum (ETH, Ethash) and Decred (DCR, blake14r) / Verge (XVG, blake2s) without affecting Ethereum mining performance.
Automatically tune mining performance in dual mining mode.
Support dual mining mode in launcher and dashboard GUI.
Add scripts to download third party software OhGodAnETHlargementPill to improve Ethereum mining performance on GTX 1080/1080Ti.
Introduce new REST APIs to display stratum/solver/device status.


Experimental support for mining Ethereum.
Various usability improvements on the launcher GUI.
Create a lite distribution without the launcher GUI.


Fix potential regression caused by 6.0.0 for GPUs mounting on risers.
Improve mining algorithm stability.


Failover server supports. Supply multiple uris (separated by commas) via the -uri option to enable the failover support.
A launcher GUI for Windows.
Reduce reject rate caused by stale shares.
0.3-0.5% performance improvement depending on card models.
Fix inaccurate metrics at the start of Bminer.
Reduce CPU usage the start of bminer.
Support miner.reconnect().
Experimental support for miningrigrentals.
A new option -no-runtime-info to disable runtime information collection.


Show the fan speed in both console and UI.
Fix compatibility issues for
Fix a bug that causes Bminer fails to start on Windows under some configuration.


Fix a reconnection issue in the network layer.
Show additional statistics in console.
Allow cross-domain requests to access the API.
Fix the compatibility issue with docker.
Introduce the option `-share-check` to make the time of recovering from no accepted shares configurable.


Experimental support for EthOS / Ubuntu 14.04.
Support AMD K10 CPUs.
Automatically restart hanged network connections.
Improve compatibilities with mining rigs with more than 8 cards.


Introduced the option -logfile to append the logs into a file.
Minor optimization on Windows for cards that are mounted on the risers.
Improve compatibility for NiceHash.


Support NiceHash.
Fix unstable network connections in 5.0.0.
Fix performance regressions for 1080Ti under Linux.


Minor performance improvement for GTX 1060.
Fixed performance regressions in 4.0.0 on Windows.
Optimization on the networking layer.
Show GPU ID in case of hardware errors.
Introduced the option -no-timestamps which suppresses the timestamps in the logging messages.


Minor performance improvement.
Support older CPUs like Core 2 Duo.
Support mining rigs that have more than 8 GPUs.
Removed the polling option.
Introduced the option `-max-network-failures` which allows Bminer to exit after consecutive network failures.
Various improvement on the UI.
Localization for Russian and Chinese.


Minor performance improvement.
Disable CPU polling by default.
Introduce a Web-based dashboard.
Support slushpool.


Add the -polling option to make GPU polling configurable.
Disabling polling reduces the CPU usage but it might reduce the performance in some configurations.
Improve the stability of the network connections.
First public release for Linux.


First public release.

poslano v temi :: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29m miner for AMD/NVIDIA GPUs 16.0.3
Pes :: 08.02.2020 ob 8:04
Changes in version 4.9c (since 4.8c):
Added support for AMD RX5500 cards
Added support for the latest AMD Windows drivers 19.12.3
Adding support for AMD Linux drivers 19.50-967956
Adding option -rate 2 to use the command name "eth_submitHashRate" instead of "eth_submitHashrate" when solo mining
Fixed the problem with loading NVML with the latest Nvidia drivers
Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
Added an HTML version of the documentation for better navigation and readability
Other small improvements and fixes.

You can download PhoenixMiner 4.9c from here:!QSAVVaoS!bCFZeeUzKdvMudrY4zFWog


Changes in version 4.8c:
Added support for the latest AMD drivers under Linux 19.30-934563 and for mining with RX5700 cards under Linux. Note that drivers are quite buggy and most of the overclocking options don't work, as well as most of the hardware monitoring options.
Added a new flexible way for setting GPU-specific options with selectors. Example: -cclock 1-3:1090,4:1300 -mclock nvidia:+450,amd:2000,*:1900,gtx*1070*ti:+200 See Readme.txt for more information.
Added command-line option -gbase to set 0-base or 1-based GPU indexes (the default is 1). With -gbase 1 (the default), the first GPU is GPU1, then GPU2, etc. With -gbase 0 the first GPU is GPU0, second - GPU1, etc. Note that this also changes the indexes that are used with all command line options that accept GPU indexes (e.g. -gpus) as well as these used with the interactive commands on the miner shell window
Validated support for the latest AMD Windows drivers 19.11.3 (but they already work with 4.7c because there were no significant changes in the OpenCL driver)
Other small improvements and fixes.

PhoenixMiner is fast (arguably the fastest) Ethash (ETH, ETC, Muiscoin, EXP, UBQ, etc.) miner that supports
both AMD and Nvidia cards (including in mixed mining rigs). It runs under Windows x64 and Linux x64
and has a developer fee of 0.65% (the lowest in the industry). This means that every 90
minutes the miner will mine for us, its developers, for 35 seconds.

PhoenixMiner also supports Ubqhash for mining UBQ, ProgPOW for mining BCI, and dual mining
Ethash/Ubqhash with Blake2s.

The speed is generally faster than Claymore's Ethereum miner in eth only mode
(we have measured about 0.4-1.3% speed improvement but your results may be slightly lower or
higher depending on the GPUs). To achieve highest possible speed on AMD cards it may be needed
to manually adjust the GPU tune factor (a number from 8 to about 400, which can be changed
interactively with the + and - keys while the miner is running).

If you have used Claymore's Dual Ethereum miner, you can switch to PhoenixMiner with
minimal hassle as we support most of Claymore's command-line options and confirguration

Please note that PhoenixMiner is extensively tested on many mining rigs but there still may be some bugs.
Additionally, we are actively working on bringing many new features in the future releases.
If you encounter any problems or have feature requests, please post them here (in this thread).
We will do our best to answer in timely fashion.

1. Quick start

You can download PhoenixMiner 4.9c from here:!QSAVVaoS!bCFZeeUzKdvMudrY4zFWog (MEGA)

Examples of settings for different pools.

ethermine org (ETH):
PhoenixMiner.exe -pool eu1 ethermine org:4444 -pool2 us1 ethermine org:4444 -wal YourEthWalletAddress.WorkerName -proto 3
ethermine org (ETH, secure connection):
PhoenixMiner.exe -pool ssl: //eu1 ethermine org: 5555 -pool2 ssl: //us1 ethermine org: 5555 -wal YourEthWalletAddress.WorkerName -proto 3
ethpool org (ETH):
PhoenixMiner.exe -pool eu1 ethpool org:3333 -pool2 us1 ethpool org:3333 -wal YourEthWalletAddress.WorkerName -proto 3
dwarfpool com (ETH):
PhoenixMiner.exe -pool eth-eu dwarfpool com:8008 -wal YourEthWalletAddress / WorkerName -pass x
nanopool org (ETH):
PhoenixMiner.exe -pool eu1 nanopool org:9999 -wal YourEthWalletAddress / WorkerName -pass x
nicehash (ethash):
PhoenixMiner.exe -pool stratum + tcp: //daggerhashimoto eu nicehash com: 3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0
f2pool (ETH):
PhoenixMiner.exe -epool eth f2pool com:8008 -ewal YourEthWalletAddress -pass x -worker WorkerName
miningpoolhub (ETH):
PhoenixMiner.exe -pool us-east ethash-hub miningpoolhub com:20535 -wal YourLoginName.WorkerName -pass x -proto 1
coinotron com (ETH):
PhoenixMiner.exe -pool coinotron com:3344 -wal YourLoginName.WorkerName -pass x -proto 1
ethermine org (ETC):
PhoenixMiner.exe -pool eu1-etc ethermine org:4444 -wal YourEtcWalletAddress.WorkerName
dwarfpool com (EXP):
PhoenixMiner.exe -pool exp-eu dwarfpool com:8018 -wal YourExpWalletAddress / WorkerName
miningpoolhub (MUSIC):
PhoenixMiner.exe -pool europe ethash-hub miningpoolhub com:20585 -wal YourLoginName.WorkerName -pass x -proto 1
ubiqpool (UBIQ):
PhoenixMiner.exe -pool stratum + tcp: //eu ubiqpool io: 8008 -wal YourUbiqWalletAddress -pass x -worker WorkerName
minerpool net (PIRL):
PhoenixMiner.exe -pool pirl minerpool net:8002 -wal YourPirlWalletAddress -pass x -worker WorkerName
dodopool com (Metaverse ETP):
PhoenixMiner.exe -pool etp dodopool com:8008 -wal YourMetaverseETPWalletAddress -worker Rig1 -pass
minerpool net (Ellaism):
PhoenixMiner.exe -pool ella minerpool net:8002 -wal YourEllaismWalletAddress -worker Rig1 -pass x

Pool options:

3. Command-line arguments

Note that PhoenixMiner supports most of the command-line options of Claymore's dual Ethereum miner
so you can use the same command line options as the ones you would have used with Claymore's miner.

-pool <host rt> Ethash pool address (prepend the host name with ssl:// for SSL pool, or http:// for solo mining)
-wal <wallet> Ethash wallet (some pools require appending of user name and/or worker)
-pass <password> Ethash password (most pools don't require it, use 'x' as password if unsure)
-worker <name> Ethash worker name (most pools accept it as part of wallet)
-proto <n> Selects the kind of stratum protocol for the ethash pool:
1: miner-proxy stratum spec (e.g. coinotron)
2: eth-proxy (e.g. dwarfpool, nanopool) - this is the default, works for most pools
3: qtminer (e.g. ethpool)
4: EthereumStratum/1.0.0 (e.g. nicehash)
5: EthereumStratum/2.0.0
-coin <coin> Ethash coin to use for devfee to avoid switching DAGs:

auto: Try to determine from the pool address (default)
eth: Ethereum
etc: Ethereum Classic
exp: Expanse
music: Musicoin
ubq: UBIQ
pirl: Pirl
ella: Ellaism
etp: Metaverse ETP
pgc: Pegascoin
akroma: Akroma
whale: WhaleCoin
vic: Victorium
nuko: Nekonium
mix: Mix
egem: EtherGem
aura: Aura
hbc: Hotelbyte Coin
gen: Genom
etz: EtherZero
clo: Callisto
dbix: DubaiCoin
moac: MOAC
etho: Ether-1
etcc: EtherCC
yoc: Yocoin
b2g: Bitcoiin2Gen
esn: Ethersocial
ath: Atheios
reosc: REOSC

4. Configuration files

Note that PhoenixMiner supports the same configuration files as Claymore's dual Ethereum miner
so you can use your existing configuration files without any changes.

Instead of using command-line options, you can also control PhoenixMiner with configuration
files. If you run PhoenixMiner.exe without any options, it will search for the file config.txt
in the current directory and will read its command-line options from it. If you want, you can
use file with another name by specifying its name as the only command-line option
when running PhoenixMiner.exe.

You will find an example config.txt file in the PhoenixMiner's directory.

Instead of specifying the pool(s) directly on the command line, you can use another configuration
file for this, named epools.txt. There you can specify one pool per line (you will find an example
epools.txt file in the PhoenixMiner's directory).

For the dual mining pools, you can use the dpools.txt file, which has the same format as epools.txt
but for the secondary coin. You will find an example epools.txt file in the PhoenixMiner's directory.
Note that unlike the epools.txt, which is loaded each time when the miner starts, the dpools.txt file
is only read if you specify a dual mining pool on the command line with -dpool, or at least add
the -dcoin blake2s command-line option.

The advantages of using config.txt and epools.txt/dpools.txt files are:
- If you have multiple rigs, you can copy and paste all settings with these files
- If you control your rigs via remote control, you can change pools and even the miner options by
uploading new epools.txt files to the miner, or by uploading new config.txt file and restarting
the miner.

5. Remote monitoring and management

Phoenix miner is fully compatible with Claymore's dual miner protocol for remote monitoring and
management. This means that you can use any tools that are build to support Claymore's dual miner,
including the "Remote manager" application that is part of Claymore's dual miner package.

We are working on much more powerful and secure remote monitoring and control functionality and
control center application, which will allow better control over your remote or local rigs and some
unique features to increase your mining profits.

poslano v temi :: PhoenixMiner 4.9c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Pes :: 04.02.2020 ob 20:51
Ace Grin Miner v 1.3

We are developing a fast multi-gpu windows miner for cuckaroo29 mining algorithm which is used in Grin - a new community-driven implementation of Mimblewimble.

New in v 1.3:

4-8% speed increase on Nvidia GPUs with fast CPUs
Support for 6GB Nvidia GPUs (will work on Win7, Win10 reserves too much memory)
Bug fixes

Nvidia 6GB mining cards notes:

1060 6Gb you have to migrate to windows 7
P106 works on windows 10 no need to migrate
Make sure you have the following security update on windows 7 the miner will not start without it


Supports Nvidia/AMD GPUs with a min of 7gb VRAM
Simple configuration/auto-detection of GPUs and CPU settings
4-6% speed improvement over grin gold miner
Ongoing development and dedicated Discord support channel
Moderate 1% dev fee to fund future development
Linux and Mac versions under development
Expected speeds for typical GPUs: 1080TI - 4.6 gps, 1080 3.6 gps, 1070ti 3.2 gps

Quick Launch Guide:

Optional: switch your Nvidia GPUs to "P0 power state" as it seems to increase performance. See tutorial at the bottom
Update drivers: Nvidia just use the latest, AMD we recommend 18.6.1 adrenaline drivers
Download and install 2.2.1 .NET Core libraries Note: restart required
Set virtual memory to 40-56GB (about 7gb per GPU)
Run start.bat and input your pool data. We recommend the following pools:
Optional: Input failover pool details manually into the created config.xml under <SecondaryConnection> similar to <PrimaryConnection>
Run start.bat to begin mining

Download Links!IXgFXCJK!tsc_ImSclH8X2M4I8dxHWA


Mining speed:

Nvidia driver 416.34

[v 1.3]
1060 (+100 0 101W) - 2,2 gps
1070Ti (+100 0 145W) - 3,4 gps
1080 (+100 0 150W) - 3,9 gps
1080Ti (+100 0 210W) - 4,85 gps
1080Ti (+100 0 155W) - 4,6 gps

AMD adrenaline 18.6.1

[v 1.1]
RX570 8Gb (cc:1340 mc:1750) - 1,7 gps
RX480 8Gb (cc:1330 mc:2000) - 1,9 gps

(Celeron 3930, 4Gb RAM)

poslano v temi :: [ANN] AceMiner 1.3 Fast Grin Mimblewimble Cuckoo cycle miner for AMD/Nvidia
Pes :: 03.02.2020 ob 14:11

All-In-One Mining Operation Control
Current Version: a8.6.2

AIOMiner a8.6.2

Next Release: AIOMiner v9.0 - We're not good at setting launch dates

Mine ANY Coin on These Supported Algorithms (103):

Monitor Your Fleet
(No Rig Limits)

Control Your Rigs

Synchronize with Variable Electric Rates

Save and Manage Multiple Pools and Wallets

More Great Features:

No AIOMiner Fees
AMD/NVIDIA Support Auto Profit Switching
Auto start mining on start of application
Idle Mining
Display of current GPU Power usage on the front of the application (AMD is an estimate at this time)
Enable Auto-Login for your windows machine
Enable AIOMiner to start as soon as you boot
Backup/Import settings
Track Profitability in multiple currencies
Automatic Crash Recovery
And Much Much More!

Current Release: 8.6.2

How to Update
Re-Run the installer: AIOMiner a8.6.2 to your current installed directory. You won't lose any of your settings it will just update the .exe


8.6.2 - 8/3/2019
If APIKey is enabled, we will confirm connectivity before checking subscription status
Top 5 now go off of Profit as being on top vs Rev
Fixed API status with corrupt aiosettings.json
Fixed purple buttons no working in windows settings (thanks AVG)
Added in est power car use to better help predict profits

8.6.1 - 7/15/2019
Fixed bug with Profit Following where it would keep looking for a new coin every 1-2 Minutes
Following profit will now quickly start vs waiting 1 minute
AIOMiner will now create a backup of AIOSettings.json on load and change, in the event the file is corrupt it will restore from the backup. This should finally be the fix for Power outages corrupting AIOMiner
Removed the color Red from windows settings Fix buttons to appease Virus Protection Standards.
Added in API Support for NBMiner and MiniZ
8.6.0 - 6/16/2019
Created System Checks for Virtual Memory, Disk Space, Windows Defender, and Windows Update Service
Windows Settings->System Check will now help users Perform tasks needed to mine safely
WhatToMine Top 5 Coins will now include Profit, after using your power costs
In Benchmark-Miner Settings you can adjust your Power Costs
In Benchmark-Miner Settings, Subscribers can now auto-adjust their Refresh for WhatToMine
Fixed multiple bugs with the API System to prepare for 9.0
Included more algos in the Benchmark and WhatToMine profit search.
Added in support for 1060/ti and VII cards to help with profit matching.
Updated the installer to no longer require admin right unless you are installing a framework.

8.5.5 - 5/4/2019
Fixed bug with GPU Utilization/Fan % for 16XX and 20XX Nvidia GPUS
Updated commands for future website updates
Updated Rig Restart to now support 1,3,6 Hours
Fixed bug where we allowed non UTF-8 or Special Characters in the rigname that caused issues on the command center
Fixed long loading for Subscription Checking
8.5.4 - 3/22/2019
Added CryptonightV4(R) to Profit Search
Added support for Nvidia 2070 Profit Search
Added CuckooCycle to Profit Search
Fixed Bug with loading Schedule
Reduced size of miner/benchmark window for lower resolution screens
Decreased time taken to review subscription status
Added CryptoNightR to benchmark
Removed CryptonightV8 from Profit Search/Benchmark

poslano v temi :: AIOMiner: The All-In-One Miner | No Fees | 100+ Algorithms | 8.6.2
Matjaz299 :: 02.02.2020 ob 21:12
Pi Network in Pi mining omogoča rudarjenje kriptovalute na telefonu. Pi mining je aplikacija, ki jo naložite na telefon in vam samodejno rudari kriptovaluto (medtem ne prazni baterije)
V aplikacijo in rudarjenje ni potrebno nič investirati in sta oba popolnoma brezplačna.

Trenutno je še v beta fazi, tako da valuta še ne trguje na nobeni borzi, vse kar morate narediti je to da se prijavite in potem morate vsak dan (po pretečenih 24 urah klikniti na ikono za podalšanje rudarjenja (varovalka da res rudarijo ljudje in ne boti)

Vstop je možen samo z povabilom od nekoga ki je že udeležen.


Ali pa ročni vnos:

Obvezno uporabiti velike in majhne črke tako kot piše,drugače ne sprejme.

več si lahko preberete tukaj:

Stran je v angleščini.

Probati ni greh, morda pa je to naslednik bitcoina.

Lep pozdrav

poslano v temi :: PI Network( free mining)