PRIJAVI SE
in sodeluj na forumu, komentiraj, ocenjuj... Registriraš se v samo 10ih sekudah!
Bitcoin Slovenija
 

Zadnja sporočila


Pes :: 29.06.2020 ob 11:04
SRBMiner-MULTI AMD & CPU Miner 0.4.7
Windows & Linux
------------------------------------------------------------------------------------------------------

Download links:
https://mega.nz/folder/tGoFHRbS#xJaRZ_54xiAYiZmBihxPWg

===========================================
SUPPORTED ALGORITHMS:
===========================================

[CPU ONLY]


+ cpupower
+ defyx
+ m7mv2
+ minotaur
+ randomarq
+ randomepic
+ randomkeva
+ randomsfx
+ randomwow
+ randomx
+ randomxl
+ yescryptr16
+ yescryptr32
+ yescryptr8
+ yespower
+ yespower2b
+ yespoweric
+ yespoweriots
+ yespoweritc
+ yespowerlitb
+ yespowerltncg
+ yespowerr16
+ yespowerres
+ yespowersugar
+ yespowerurx

[CPU & GPU]

+ bl2bsha3
+ blake2b
+ blake2s
+ cryptonight_bbc
+ cryptonight_catalans
+ cryptonight_talleo
+ eaglesong
+ ethash
+ k12
+ kadena
+ keccak
+ mtp
+ rainforestv2
+ tellor
+ ubqhash
+ yescrypt


===========================================
SUPPORTED GPU'S:
===========================================

+ RX 5500/5600/5700 (few algorithms only)
+ VEGA 56/64/FE/VII
+ RX 460/470/480/550/560/570/580/590
+ R9 285/285X/380/380X
+ R9 290/290X
+ R9 Fury/Nano

Linux : amdgpu-pro drivers required


===========================================
FEES:
===========================================

~2.50%
+ cryptonight_bbc

~2.00%
+ minotaur

0.00%
+ blake2b
+ blake2s
+ cryptonight_catalans
+ cryptonight_talleo
+ keccak
+ m7mv2
+ mtp
+ yespoweritc
+ yespowerurx

~0.85%
+ Rest


===========================================
FEATURES:
===========================================

+ Guided setup mode
+ Algorithm switching capability without external application
+ Run in background without a window
+ Hashrate watchdog that restarts miner on GPU error
+ Monitoring of GPU temperature, and auto turn off if temperature is too high
+ System shutdown on too high GPU temperature
+ Miner auto restart on too many rejected shares
+ Startup monitor which ensures your miner starts working normally
+ API for miner statistics
+ Web based GUI interface for miner statistics
+ Multiple pools with failover support
+ Add new pools on the fly without restarting miner
+ Difficulty monitor, reconnects to pool if difficulty is too high
+ Job timeout monitor, reconnects to pool if no job received for a long time
+ Switch AMD video cards to compute mode easily


===========================================
USAGE EXAMPLES
===========================================

1. Disable CPU mining, use only GPU mining

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-cpu

2. Run miner in background without console window, with API enabled on port 17644

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --background --api-enable --api-port 17644

3. Disable GPU mining, use 7 CPU threads with extended logging enabled and saved to Logslog.txt file

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 7 --log-file Logslog.txt --extended-log

4. Full example for CPU & GPU mining set only from cmd (4 GPU/s used and 7 CPU threads on K12 algorithm)

Code:
SRBMiner-MULTI.exe --algorithm k12 --gpu-id 0,1,2,3 --gpu-intensity 26,25,26,26 --gpu-worksize 256,256,256,256 --gpu-threads 1,1,1,1 --cpu-threads 7 --pool your-pool-here --wallet your-wallet-here

5. Disable GPU mining, use 15 CPU threads with extended logging enabled and saved to Logslog.txt file, start mining Randomx from block height 1978433 and run miner in background

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 15 --log-file Logslog.txt --extended-log --background --start-block-height 1978433


===========================================
CPU MINING SETUP
===========================================

If you don't set the --cpu-threads or --cpu-affinity parameters, miner will try to automatically find the best setup for you system.
Sometimes the auto setup won't find the optimal settings so you should find it by experimenting.

You need to set the number of worker threads (--cpu-threads) and bind them to the appropriate PU (processing unit) with --cpu-affinity.

Examples to get you started:

4 CORE / 8 THREADS CPU :

1. Use 4 threads, 1 on every core : --cpu-threads 4 --cpu-affinity 0x55
2. Use 8 threads, 2 on every core : --cpu-threads 8 --cpu-affinity 0xFF

6 CORE / 12 THREADS CPU :

1. Use 6 threads, 1 on every core : --cpu-threads 6 --cpu-affinity 0x555
2. Use 12 threads, 2 on every core : --cpu-threads 12 --cpu-affinity 0xFFF


===========================================
RANDOMX EXTRA TWEAKS
===========================================

To enjoy the benefits of the increased hashrate:

1. Miner must run with administrator privileges [right click on SRBMiner-MULTI.exe->properties->compatibility-> check 'Run this program as an administrator' option-> click OK button
2. Make sure WinRing0x64.sys is in the same folder as SRBMiner-MULTI.exe

Enabling the extra tweaks, some register values are changed which will revert back to the original value after a computer restart.

If miner starts crashing, or creates bad results after enabling the extra tweaks, you can try the '--randomx-use-tweaks' parameter, where you can define which tweak/s you want to enable.
Without this option miner enables all available tweaks (same as --randomx-use-tweaks 0123 for AMD, --randomx-use-tweaks 0 for Intel) , but with '--randomx-use-tweaks' you can define which ones you want to use.

There are at the moment :
Intel - 1 tweak
Amd - 5 tweaks


Index starts from 0, so you have 0 1 2 3 4 for options on AMD.

Here's an example :

+ Use tweaks number 0 and 3 (dont use 1 and 2)

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03

The order of tweaks doesn't matter, so writing 03 is same as 30.

What you should do is to find which tweak, or combination of tweaks, makes the problems.
You should try enabling tweaks one by one, and test to see if miner runs stable with one tweak, and if it does, test the next one etc.
Luckily there are not so many combinations for you try (because 0123 is for example same as 3021 or 1302.. )

So start with :
Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0

If it runs without crashing for some time, try the next one :

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1

and so on, until you find the one that makes the trouble.

Then try combining tweaks to find a combination that works for you.

If you have older gen. Ryzens, try this combination of tweaks :

Code:
--randomx-use-tweaks 0134


===========================================
INFORMATIONS
===========================================

SRBMiner-Multi is supported by Awesome Miner

If you get "Insufficient system resources available to allocate X kB in large-page memory" message, that means you dont have enough FREE memory left, a computer restart should solve this.
Large-page memory regions may be difficult to obtain after the system has been running for a long time because the physical space for each large page must be contiguous, but the memory may have become fragmented.
If you still get this message even after restarting, try increasing virtual memory.


You can find all the parameters and everything you need to get going in the readme.txt file.

This thread is self moderated, because in the previous SRBMiner thread there was too much spam and garbage, which wasn't removed by the forum moderators.
Update infos :

V0.4.7
+ Removed devfee for 'blake2s', 'mtp', 'keccak', 'yespoweritc', 'm7mv2', 'cryptonight_catalans', 'cryptonight_talleo' algorithms
+ Lowered 'bl2bsha3' devfee to standard fee (~0.85%)
+ Fixed 'randomx' algorithm when running on 64+ threads
+ Fixed config parameter "cpu_affinity"

V0.4.6
+ Fixed 'defyx' algorithm on Intel CPU's (previous version broke it)
+ Hashrate stats (pressing 'h' now shows current hashing speed of CPU, and not the 10 second average
+ Lowered pool reconnection time to 15 sec
+ Added parameter '--gpu-ethash-mode' to cmd parameters
+ Added parameter 'gpu_ethash_mode' to config parameters
+ Added parameter 'ethash_mode' to gpu_conf parameters
+ Added parameter '--disable-cpu-auto-affinity'

V0.4.5
+ Added 'randomepic' algorithm (EpicCash RandomX) solo/pool
+ 'ethash' and 'ubqhash' algorithm faster ~1.5% on Vega
+ 'RandomX' algorithm improvements
+ Fixed allocation of 'RandomX' dataset for 1Gb pages (--randomx-use-1gb-pages parameter)
+ Fixed an issue with MSR tweaks not being applied correctly
+ Lowered 'minotaur' algorithm devfee to 2%
+ Fixed crashing of 'minotaur' algorithm on AVX2 capable cpu's
+ '--send-stales' is now set per pool, it accepts true/false. Default is true.
+ 'send_stales' parameter added to pools config file too
+ '--gpu-intensity' option can now be used in combination with auto gpu setup in cmd
+ Improved gpu watchdog
+ Added temporary parameter '--cnpool-bbc-fix' which disables workers if job diff >= 50
+ Minor bug fixes

V0.4.4
+ added 'ethash' algorithm
+ added 'ubqhash' algorithm
+ added parameter '--esm' to set ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy)
+ added parameter 'esm' to pools config (ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy))
+ added parameter '--enable-ethash-leak-fix' which tries to workaround AMD driver memory leak when recreating DAG
+ fixed algo switching and tweak_profiles miner freeze bug
+ --gpu-tweak-profile option can now be used with auto gpu setup in cmd

V0.4.3
+ Added 'tellor' algorithm (trb.uupool.cn compatible stratum)
+ Improvements on 'minotaur' algorithm
+ Guided setup fixed & simplified

V0.4.2
+ Improvements for 4G Ellesmere cards on 'cryptonight_bbc' algorithm
+ Small improvements on 'yespower' CPU algorithms
+ Added parameters 'disable_cpu' and 'disable_gpu' in configuration file
+ Fixed 'handshake' algorithm mining on nicehash
+ Algoswitching now reconnects back to main pool when it gets available
+ Minor bug fixes

V0.4.1
+ Added CPU algorithm 'minotaur' (Ring coin)
+ Added CPU algorithm 'yespowerres' (Resistance coin)
+ 2-4% faster 'cryptonight_bbc' on some GPU's
+ Minor bug fixes

V0.4.0
+ Added algorithm 'randomkeva' (Keva coin upcoming algorithm)
+ Added Navi support for 'cryptonight_bbc' algorithm
+ Much better auto setup for RX 4xx/5xx 8G cards on 'cryptonight_bbc' algorithm

poslano v temi :: SRBMiner-MULTI AMD & CPU Miner 0.4.7 Win & Linux
Pes :: 29.06.2020 ob 10:29


NBMiner

GPU Miner for ETH, RVN, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB.

Download

Download From MEGA Release: https://mega.nz/folder/pPpWwARY#xd8inP3Yo8Wq6dXk0zbwLQ

Features
Support Windows & Linux.
Support backup mining pool configuration.
Support SSL connection to mining pools.

Dev Fee

tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%
hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%


Performance (stock frequency)

Code:
| Algorithm | Coin | P106-100 | P104-8G | 1070ti | 1080ti | 2080 | RX580 2048sp |
| :--------------- | :-----: | :--------: | :--------: | :--------: | :------: | :------: | :----------: |
| tensority | BTM | 1,900 | 3000 | 3,400 | 5,000 | 11,500 | X |
| ethash | ETH | 21.2M | 34.5M | 26.9M | 46M | 35.5M | X |
| tensority_ethash | BTM+ETH | 950+15.5M | 1600+26.5M | 1350+22M | 2450+40M | 7000+28M | X |
| cuckaroo | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| cuckarood | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 9.1 | X |
| cuckatoo | GRIN31 | - | 0.89 | 0.94 | 1.56 | 1.65 | X |
| cuckoo_ae | AE | 3.35 | 5.5 | 5.15 | 7.9 | 8.75 | X |
| cuckaroo_swap | SWAP | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| progpow_sero | SERO | 10.3M | 17.5M | 13.3M | 22.5M | 25.8M | 10M |
| sipc | SIPC | 600k | 940k | 780k | 1170k | 1050k | X |
| eaglesong | CKB | 430M | 640M | 740M | 1150M | 1160M | 350M |
| eaglesong_ethash | CKB+ETH | 203M+20.5M | 275M+34M | 415M+26.5M | 600M+44M | 790M+36M | 200M+22M |
| bfc | BFC | 80 | 130 | 120 | 190 | 210 | X |
| hns | HNS | 170M | 255M | 300M | 455M | 425M | 145M |
| hns_ethash | HNS+ETH | 76M+19M | 120M+30M | 158M+26.2M | 176M+44M | 305M+34M | 68M+22.5M |
| trb | TRB | 280M | 435M | 510M | 750M | 880M | X |
| trb_ethash | TRB+ETH | 122M+20.3M | 170M+34M | 240M+26.7M | 315M+45M | - | X |

Sample Usages

BTM
f2pool: nbminer -a tensority -o stratum+tcp://btm.f2pool.com:9221 -u bm1xxxxxxxxxx.worker
antpool: nbminer -a tensority -o stratum+tcp://stratum-btm.antpool.com:6666 -u username.worker
matpool.io: nbminer -a tensority -o stratum+tcp://btm.matpool.io:8118 -u bm1xxxxxxxxxxx.worker

ETH
ethermine: nbminer -a ethash -o ethproxy+tcp://asia1.ethermine.org -u 0x12343bdgf.worker
sparkpool: nbminer -a ethash -o ethproxy+tcp://cn.sparkpool.com:3333 -u 0x12343bdgf.worker
f2pool: nbminer -a ethash -o ethproxy+tcp://eth.f2pool.com:8008 -u 0x12343bdgf.worker
nanopool: nbminer -a ethash -o ethproxy+tcp://eth-asia1.nanopool.org:9999 -u 0x12343bdgf.worker
nicehash: nbminer -a ethash -o nicehash+tcp://daggerhashimoto.eu.nicehash.com:3353 -u btc_address.worker

BTM+ETH
f2pool: nbminer -a tensority_ethash -o stratum+tcp://btm.f2pool.com:9221 -u btm_address.btm_worker -do ethproxy+tcp://eth.f2pool.com:8008 -du eth_address.eth_worker

Grin29
sparkpool: nbminer -a cuckarood -o stratum+tcp://grin.sparkpool.com:6666 -u 123@qq.com/worker
f2pool: nbminer -a cuckarood -o stratum+tcp://grin29.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckarood -o nicehash+tcp://grincuckaroo29.eu.nicehash.com:3371 -u btc_address.worker

Grin31
sparkpool: nbminer -a cuckatoo -o stratum+tcp://grin.sparkpool.com:66667-u 123@qq.com/worker
f2pool: nbminer -a cuckatoo -o stratum+tcp://grin31.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckatoo -o nicehash+tcp://grincuckaroo31.eu.nicehash.com:3372 -u btc_address.worker

AE
f2pool: nbminer -a cuckoo_ae -o stratum+tcp://ae.f2pool.com:7898 -u ak_xxxxxxx.worker passwd
beepool: nbminer -a cuckoo_ae -o stratum+tcp://ae-pool.beepool.org:9505 -u ak_xxxx.worker passwd
uupool: nbminer -a cuckoo_ae -o stratum+tcp://ae.uupool.cn:6210 -u ak_xxxxxx.worker passwd
nicehash: nbminer -a cuckoo_ae -o nicehash+tcp://cuckoocycle.eu.nicehash.com:3376 -u btc_address.test
SWAP
luckypool: nbminer -a cuckaroo_swap -o stratum+tcp://swap2.luckypool.io:4466 -u wallet_address:worker
herominers: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u wallet_address.worker
herominers solo: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u solo:wallet_address.worker:arbitrary

SERO
beepool: nbminer -a progpow_sero -o stratum+tcp://sero-pool.beepool.org:9515 -u wallet_address.worker pswd
f2pool: nbminer -a progpow_sero -o stratum+tcp//sero.f2pool.com:4200 -u wallet_address.worker pswd

SIPC
simpool: nbminer -a sipc -o stratum+tcp://sipc.simpool.vip:8801 -u username.worker passwd
matpool: nbminer -a sipc -o stratum+tcp://sipc.matpool.io:11100 -u username.worker passwd

CKB
sparkpool: nbminer -a eaglesong -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd
beepool: nbminer -a eaglesong -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd
uupool: nbminer -a eaglesong -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd
f2pool: nbminer -a eaglesong -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd

CKB+ETH
sparkpool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd -do stratum+tcp://cn.sparkpool.com:3333 -du wallet.worker passwd
beepool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd -do stratum+tcp://eth-pool.beepool.org:9530 -du wallet.worker passwd
uupool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker passwd
f2pool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker passwd

BFC
uupool: nbminer -a bfc -o stratum+tcp://bfc.uupool.cn:12210 -u user.worker
bfcpool: nbminer -a bfc -o stratum+tcp://ss.bfcpool.com:3333 -u wallet.worker

HNS
f2pool: nbminer -a hns -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker

HNS+ETH
f2pool: nbminer -a hns_ethash -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker

TRB
uupool: nbminer -a trb -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker
hashpool: nbminer -a trb -o stratum+tcp://pplns.trb.stratum.hashpool.com:8208 -u wallet.worker

TRB+ETH
uupool: nbminer -a trb_ethash -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker

RVNt
minermore: nbminer -a kawpow -o stratum+tcp://rvnt.minermore.com:4505 -u wallet.worker passwd

CMD options
-h, --help Displays this help.
-v, --version Displays version information.
-c, --config <config file path> Use json format config file rather than cmd line options.
-a, --algo <algo> Select mining algorithm
BTM: tensority
ETH: ethash
BTM+ETH: tensority_ethash
Grin29: cuckaroo
Grin31: cuckatoo
SWAP: cuckaroo_swap
--api <host port> The endpoint for serving REST API.
-o, --url <url> Mining pool url.
BTM: stratum+tcp://btm.f2pool.com:9221
BTM with SSL: stratum+ssl://btm.f2pool.com:9443
ETH: ethproxy+tcp://eth.f2pool.com:8008
ETH with NiceHash: ethnh+tcp://daggerhashimoto.eu.nicehash.com:3353
-u, --user <user> User used in Mining pool, wallet address or username.
-o1, --url1 <url> url for backup mining pool 1.
-u1, --user1 <user> username for backup mining pool 1.
-o2, --url2 <url> url for backup mining pool 2.
-u2, --user2 <user> username for backup mining pool 2.
-di, --secondary-intensity <intensity> The relative intensity when dual mining.
-do, --secondary-url <url> ETH mining pool when dual mining.
-du, --secondary-user <user> ETH username when dual mining.
-do1, --secondary-url1 <url> Backup 1 ETH mining pool when dual mining.
-du1, --secondary-user1 <user> Backup 1 ETH username when dual mining.
-do2, --secondary-url2 <url> Backup 2 ETH mining pool when dual mining.
-du2, --secondary-user2 <user> Backup 2 ETH username when dual mining.
-d, --devices <devices> Specify GPU list to use. Format: "-d 0,1,2,3" to use first 4 GPU.
-i, --intensity <intensities> Comma-separated list of intensities (1 -100).
-strict-ssl Check validity of certificate when use SSL connection.
--cuckoo-intensity <intensity> Set intensity of cuckoo, cuckaroo, cuckatoo, [1, 12]. Set to 0 means autumatically adapt. Default: 0.
--cuckatoo-power-optimize Set this option to reduce the range of power consumed by rig when minining with algo cuckatoo. This feature can reduce the chance of power supply shutdown caused by overpowered. Warning: Setting this option may cause drop on minining performance.
--temperature-limit <temp-limit> Set temperature limit of GPU, if exceeds, stop GPU for 10 seconds and continue.
-log Generate log file named `log_<timestamp>.txt`.
--log-file <filename> Generate custom log file. Note: This option will override `--log`.
--no-nvml Do not query cuda device health status.
--fidelity-timeframe <timeframe> Set timeframe for the calculation of fidelity, unit in hour. Default: 24.
-long-format Use 'yyyy-MM-dd HH:mms,zzz' for log time format.
--device-info Print device cuda information.
--fee <fee> Change devfee in percentage, [0-5]. Set to '0' to turn off devfee with lower hashrate. Otherwise, devfee = max(set_value, def_value).
--generate-config <filename> Generate a sample config json file.
--no-watchdog Disable watchdog process.
--platform <platform> Choose platform,0: NVIDIA+AMD (default), 1: NVIDIA only, 2: AMD only


Change Log

v31.1(2020-06-24)
`new algo`: `cuckatoo32` for `Grin32` on Nvidia 8G above GPUs
`kawpow`: support for `NiceHash`'s `extranonce.subscribe` protocol

v30.2(2020-05-05)
`windows`: Auto install driver if `--memory-tweak` is set and driver is not installed.
`windows`: Fix `driver install failed` issue on some windows rigs.
`kawpow`: Fix `duplicate share` issue on some pools.

v30.1(2020-05-03)
Reduce `ethash` `kawpow` startup time.
Fix a possible crash on certain rigs of reason `invalid kernel image`.
Do not apply memory tweak if `-mt` is set to 0 on corresponding gpu.
Print system information on start.

v30.0(2020-04-30)
Add option --memory-tweak , optimize memory timings of Nvidia GD5 & GD5X GPUs. Detail describe can be found in readme.md
Add option --verbose, print pool communucation log.
Add option --proxy, user can using socks5 proxy to set up connection with pool.
Add number of shares per GPU in both log print and api.
Minor bug fix and improvements.

v29.1(2020-04-09)
Fix low hashrate of kawpow on AMD RDNA GPU.
Improve kawpow hashrate on AMD GPU.

v29.0(2020-04-03)
Add support for RVN new algo 'kawpow' mining on Nvidia & AMD gpus.

v28.1(2020-03-30)
Support HNS & HNS+ETH mining on NiceHash

v28.0(2020-03-28)
Add support for mining TRB & TRB+ETH on Nvidia GPU
Add support for mining ETH on `miningrigrentals`.
Minor improvements and fixes.

v27.7(2020-03-14)
Fix ETH mining on NiceHash.
Fix NVML initialization failure on certain cases.

v27.6(2020-03-14)
Improve HNS & HNS+ETH on Nvidia GPU.

v27.5(2020-03-05)
Fix high ETH reject rate on certain pools when mining HNS+ETH.
Slightly improve mining HNS+ETH on Nvidia GPU.

v27.4(2020-02-28)
Fix support the certain AMD Vega GPUs.
Fix a potential bug when mining under AMD+Nvidia mixed rig.

v27.3(2020-02-27)
Add HNS+ETH mining on AMD GPU
Improve HNS+ETH performance on Nvidia GPU
Note: `-di` calculation is changed in this version for HNS+ETH.
The value of `-di` = `work_size_of_hns` / `work_size_of_eth`
E.g, `-di 5` on a stock freq 1070ti will get 26M for eth & 130M for hns.

v27.2(2020-02-20)
Improve HNS performance on AMD GPU

v27.1(2020-02-19)
Improve HNS performance on Nvidia GPU
Add support for HNS mining for AMD GPU

v27.0(2020-02-18)
Add support for HNS & HNS_ETH mining for NVIDIA GPU
Minor bug fix and improvements.

v26.2(2019-11-21)

Improve CKB+ETH performance on AMD GPU.
Fix bug of 26.1: Launch crash on certain AMD rigs.

v26.1(2019-11-15)

Add support for mining CKB+ETH on AMD GPU.
Improve performance for mining CKB on Nvidia GPU.

v26.0(2019-10-11)

Add support for BFC mininig on Nvidia GPU.
Fix CKB compatibility on AMD GPU.
Fix cuckcoocycle on nicehash.

v25.5(2019-10-05)

Fix a bug when mining CKB+ETH.
Fix a compatibility issue in CKB stratum protocol.

v25.4(2019-10-04)

Improve CKB mining performance on both NVIDIA & AMD cards.
Improve CKB+ETH performance on NVIDIA cards.
Add support for mining SERO on AMD cards.
Add a new option `--platform` to allow users to choose GPU platform.

v25.2(2019-09-10)

Add support for `CKB` mining on AMD cards under linux.
Bug fix.

v25.1(2019-09-07)

Add support for `CKB` mining on AMD cards.

v25.0(2019-09-05)

Add support for `CKB` mining & `CKB`+`ETH` dual mining.
Enhance `-di` parameter to support comma separated list to specify `-di` value for each card.
The default value of `-di` for `CKB`+`ETH` mining ranges from 4 ~ 8 depending on GPU model, valid value range in [1, 10], higher value means higher intensity for `ETH`.
The best value of `-di` differs by GPU model, overclock and power limitation.

v24.4(2019-08-16)
Fix SIPC dxpool compatibility.
1080 & 1080ti users should use `OhGodAnETHlargementPill` to boost SIPC performance.

v24.3(2019-08-15)
Add support for mining SIPC.
Fix high CPU usage mining SERO with 24.1 & 24.2
Fix Grin intensity.

v24.2(2019-07-17)
Disable the auto-switch from cuckaroo -> cuckarood
Slightliy improve RTX2060 Grin29 performance under win10
Fix startup stuck issue on some linux distro.
Add new option `--generate-config` to generate a sample config file.
Note: Linux sero mining need to set a env before start if run with --no-watchdog, please check start_sero.sh

v24.1(2019-07-16)
Fix lower hashrate than previous version for Grin29 & AE on 10xx 6GB cards
Fix mining Grin29 AE on Turing 6GB Cards on Win10.
Fix the disfunction of auto-reboot when GPU error happens.
Fix start using json config file.
Change the GPU MEM size display upon launch from Total Size to Available Size.

v24.0(2019-07-15)
Support Grin29 fork on 17th, July.
When using algo `cuckaroo`, v24.0 will do an automatically switch to `cuckarood` on height 262080.
Add a temporary option `-grin29-fork-height`, user can test the auto-switch by setting this option to lower height value.
Improve performance on Grin29 & AE.
Add support for mining `SERO`, algo `progpow_sero`.
Add option `-intensity` to set the intensity level for each GPU.
Add option `-fidelity-timeframe` to customize the timeframe for fidelity calculation.
Add option `-log-file` to set a specified log filename.
Add option `-no-nvml` to close the periodical query for GPU status.
Add new method to turn on NiceHash protocol, `nicehash+tcp://`
Also compatible with previous url based method.
Minor improvement and bug fix.

v23.3(2019-06-14)
Fix mining AE (cuckoocycle) on NiceHash.
Add option to set a temperature limit on GPU.

v23.2(2019-05-09)
Improve Grin & AE & SWAP performance.
Add support for mining AE on NiceHash.
Add display output of Fidelity.
Minor improvement and bug fix.

v22.3(2019-04-15)
Improve performance of Grin31 on 1080ti & 2080ti.

v22.2(2019-04-15)
Improve compatiblity for mining Grin31 on windows 8GB cards.
Set default --cuckoo-intensity to 4, lower CPU usage on default settings when mining Grin & AE.

v22.1(2019-04-12)
Add support for mining Swap (XWP).
Improve Grin29 & AEperformance.
Improve Windows compatibility on Grin & AE, significant boost on performance.

v21.4(2019-04-03)
Improve Grin31 performance.
Improve performance of Grin29 & AE on RTX cards.
Fix Grin31 compatibility on Win7 with 8G cards.
New option to reduce the range of power consumption by multi-gpu rig.
Add miner Up Time print in cmd outputs.

v21.3(2019-03-20)
Fix bug: Occasionlly lower local hashrate than previously version.
Do not run GPU if mining pool not connected when mining Grin & AE.

v21.2(2019-03-15)
Fix bug: "GPU hung detected" happens under some normal conditions.

v21.1(2019-03-14)
Improve Grin29 performance
Add support for mining Grin & AE on Turing cards.
Add detection for GPU hung.
Increase chance of accept share when mining Grin on NiceHash.
Fix ETH mining on NiceHash.
Fix "accecpt share checking" bug when using backup mining pools.

v21.0(2019-03-06)
Add suuport for AE (Aeternity)
Improve performance on Grin29 & Grin31
Improve miner stability.

v20.0(2019-02-21)
Add support for Grin31
Add support for mining Grin on NiceHash
Add new option to tune CPU usage when mining Grin.
Improve BTM+ETH performance on RTX cards.
FIx bug of lower hashrate when mining BTM on rigs with mixed 10 series and 20 series cards.
Do not add a default worker name if no worker name specified by user.

v14.0(2019-01-30)
BTM mining, improve over 200% on RTX cards.
Improve Grin mining.

v13.2(2019-01-17)
Add support mining Grin on 1066-win10.
Fix support for Solo mining using grin-server.

v13.1(2019-01-15)
Add support for mining Grin coin (cuckaroo29).
Minor bug fix and improvement.

v12.4(2018-01-05)
Improve hashrate of BTM+ETH dual mining about 6%.

v12.3(2018-12-30)
Fix a bug that could cause many reject shares when epoch changes under ETH dual mining .

v12.2(2018-12-26)
Fix high stale share and reject share ratio when use big `-di` for dual mining BTM+ETH.
Fix the support of web monitor for dual mining.
Minor bug fixs and improvements.

v12.1(2018-12-24)
Fix support ETH PPS+ mode on F2pool
Add support for ETH on NiceHash (with protocol header `ethnh`)
Fix rest api when dual mining.
Minor bug fixs.

v12.0(2018-12-19)
**New `BTM+ETH` dual mining mode.**
Decrease the required driver version to 377.
Temporarily remove support for XMR mining.
Fix start using config file.
Add a default protocol header if not specified.

v11.0(2018-12-12)
Improve BTM hashrate.
Add support for ETH and XMR mining.
Optimize handle for new job, increase profit on mining pool.
Colorful output on console.
Add support for backup mining pools.
Decrease dev fee of BTM to 2%.

v10.0(2018-10-03)
Improve hashrate

v9.0(2018-08-28)
Improve hashrate ~30%
Improve stability

v8.0(2018-08-17)
Improve hashrate 10%
15%
Lower skipped share rate, increase actual hashrate on mining pool.
Added display for mining pool latency.
Added display for mining pool difficulty.
Improve API web monitor.

poslano v temi :: NBMiner v31.1, GPU Miner for ETH, RVN, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB
Pes :: 26.06.2020 ob 17:02
#################################################


dstm’s ZCash Cuda miner
#################################################


I’ve written it initially for my own purpose. It performs pretty well - so here it is.
Compatible with devices having Compute Capability 5.0 and greater i.e. it should run fine on Maxwell/Pascal GPUs.
Supports every server using the stratum protocol. If you have issues with certain pools pls. report them here.


Contains 2% devfee.


Suggestions are welcome.


Performance:


1080Ti 725-740 Sol/s
1070 440-450 Sol/s
stock settings


UI:


Sample output mining on a rig with 8 GPUs.
GPU0-7: 1070Ti


Code:


GPU0 65C 75% | 507.9 Sol/s 504.9 Avg 269.8 I/s | 4.52 S/W 112 W | 3.74 100 39 ++++++++
GPU1 64C 70% | 508.4 Sol/s 509.1 Avg 273.0 I/s | 4.57 S/W 111 W | 4.11 100 38 +++++++++
GPU2 62C 70% | 512.9 Sol/s 514.0 Avg 274.0 I/s | 4.60 S/W 110 W | 2.62 100 37 +++++
GPU3 61C 70% | 502.4 Sol/s 500.8 Avg 266.9 I/s | 4.48 S/W 113 W | 2.24 100 38 ++++++++*
GPU4 64C 70% | 508.6 Sol/s 508.2 Avg 272.9 I/s | 4.53 S/W 111 W | 1.49 100 38 ++++++++
GPU5 57C 70% | 506.7 Sol/s 504.7 Avg 270.0 I/s | 4.53 S/W 110 W | 1.94 100 38 ++++++++
GPU6 59C 70% | 514.5 Sol/s 506.3 Avg 270.4 I/s | 4.55 S/W 112 W | 2.36 100 38 ++++++
GPU7 64C 75% | 511.1 Sol/s 515.1 Avg 275.2 I/s | 4.62 S/W 109 W | 1.12 100 37 ++++++++
4072.6 Sol/s 4063.3 Avg 2172.1 I/s | 4.55 S/W 891 W | 19.63 100 37 ++++++++++


Sol/s: solutions per second
Avg: average solutions per second
I/s: iterations per second done by the GPU
S/W: efficiency - average Sol/s per Watt
W: power consuption in Watt
last 3 colums:


: indicates that a new job was received


: indicates one submitted share
: indicates one submitted dev fee share
= : sum/average if mining on multiple GPUs


Dependencies


Linux:
openssl 1.0 (for versions <= 0.5.7)


Windows:
Visual C++ Redistributable for visual studio 2015 (VCRUNTIME140.dll)


Version 0.6.2


fix ssl handshake failures
fix device selection bug introduced in 0.6.1
make linux performance improvements introduced in 0.6.1 optional
via ‘mq-solver’ parameter (due to issues on some systems)
improve device initialization on large systems


Linux x64:
https://mega.nz/folder/NXwVnIab#9mFP_cHDBvMWRDtqq-zmLA

Win x64:
https://mega.nz/folder/NXwVnIab#9mFP_cHDBvMWRDtqq-zmLA


Version 0.6.1


fix failover-pool not switching back on ssl errors
fix failover-pool not switching back on some servers
add support for stratum’s client.reconnect rpc
support configuration of ‘temp-target’, ‘intensity’, ‘pool’ via cmd-line parameters
report current difficulty and target on term-ui
sort output by gpu_id on term-ui
colorize temperature above 70°C on term-ui
report intended fan speed on term-ui, web-ui, json-rpc
report power consumption on term-ui
improve performance on linux systems by ~2%


Version 0.6


failover pool support
introduce configuration file
introduce intensity option
support per gpu temp-target via cfg-file
support per gpu intensity via cfg-file
json-rpc report gpu_name, pci_bus_id, pci_device_id
gpu_uuid
improve error reporting
improve handling of invalid server resposes
improve reconnection in cases where servers
become reachable but respond with malformed data
ui: add colorized output
web-ui: use dark colors


Version 0.5.8
con: add support for protocol v.01000020
link openssl statically


Version 0.5.7
reduce cpu load
minor performance improvements
con: use single pool connection
con: ssl: clear session data before reconnect
nvml: handle invalid values


Version 0.5.6
reduce cpu load
minor performance improvements


Version 0.5.5
con: handle failure of dev share pool
con: disable reconnect limit
logfile: disable buffering


Version 0.5.4
fix: device selection
fix: latency reporting
add logfile support
add option to disable auto reconnect
handle disconnect periods in web/json stats
add basic GPU responsiveness infrastructure
ui: change timestamps to ISO 8601 format
webui: report: uptime contime server user port
json: report: uptime contime server user port version


Version 0.5.3
cpu: reduce cpu load
con: fix recon loop
con: network latency measurement
ui: add accepted/rejected shares ratio
ui: add network latency
ui: add information about selected devices


Version 0.5.2
fix a race that might have corrupted shares
net: tcp: disable the Nagle algorithm
which reduces network latency in some circumstances
net: lower keepalive for nat-networks


Version 0.5.1
con: fix reconnection might have give up too early
con: enable TCP Keepalive to prevent nat-routers from
dropping the connection.
ui: output rejected shares
ui: optional output of timestamps
telemetry: make web ui mobile friendly + add share stats
telemetry: json: add more GPU stats


Version 0.5
con: support set_extranonce rpc
con: improve handling of temporary slow network conditions
con: add monitoring support using web browser
con: add monitoring support using json-rpc
mp: rebalance queue sizes - this improves the solution rate as
seen by the pools, especially on pools that submit new jobs often


Version 0.4.5
fix: bad miner performance when using --temp-target
on systems with many GPUs
reduce temperature controller cpu usage


Version 0.4.4
fix: Sol/W might have produced wrong values
fix: Sum not shown if --dev was used
fix: memory leak on reconnection
improve stability


Version 0.4.3
stratum: support more pools
ui: flush stdout stream
con: improve reconnections
performance improvements 0.3-0.5 %


Version 0.4.2
mp: more accurate time measurements
ui: calculate efficiency


Version 0.4.1
improve performance


Version 0.4.0
temperature controller added
cpu: reduce CPU usage
con: improve pool support
minor performance improvement


Version 0.3.2
mp: improve stability
con: support more pools
con: more robust reconnection support for unreliable
servers which often drop the connection
ui: report GPU temperature


Version 0.3.1
cpu: reduce CPU usage


Version 0.3
con: support encrypted connections


Version 0.2.2
con: Miner reconnects automatically on connection loss now,
e.g. on DSL-disconnects / public IP-changes
UI: report submitted devfee-shares


Version 0.2.1
Performance improvements:


about 4% on Maxwell
about 1% on Pascal


Version 0.2


Improved pascal perfromance.
Added support for concurrent mining on multiple GPUs.
Be asynchronous where possible.
Security work

poslano v temi :: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.6.2 (Linux / Windows)
Pes :: 24.06.2020 ob 22:37
This is the home of cpuminer-opt, the optimized CPU miner.

Welcome to the new cpuminer-opt discussion thread. The old thread is locked, all disussion
of cpuminer-opt should now take place here.

Supporting over 90 agorithms with many optimized for CPUs with the latest technologies:

Intel Haswell: AVX2
AMD Ryzen: AVX2, SHA
Intel Skylake X: AVX512
Intel Icelake: AVX512, SHA, and VAES

Older 64 bit CPUs with SSE2 are also supported, see below for requirements.

Downloads
https://mega.nz/folder/8HQAkQoC#Qw7WgAe0V2uKjXdy3H2rrQ


List of supported algoritms
allium Garlicoin
anime Animecoin
argon2 Argon2 coin (AR2)
argon2d250 argon2d-crds, Credits (CRDS)
argon2d500 argon2d-dyn, Dynamic (DYN)
argon2d4096 argon2d-uis, Unitus, (UIS)
axiom Shabal-256 MemoHash
blake Blake-256 (SFR)
blake2b Blake2b 256
blake2s Blake-2 S
blakecoin blake256r8
bmw BMW 256
bmw512 BMW 512
c11 Chaincoin
decred
deep Deepcoin (DCN)
dmd-gr Diamond-Groestl
groestl Groestl coin
hex x16r-hex
hmq1725 Espers
hodl Hodlcoin
jha Jackpotcoin
keccak Maxcoin
keccakc Creative coin
lbry LBC, LBRY Credits
luffa Luffa
lyra2h Hppcoin
lyra2re lyra2
lyra2rev2 lyra2v2
lyra2rev3 lyrav2v3, Vertcoin
lyra2z
lyra2z330 Lyra2 330 rows, Zoin (ZOI)
m7m Magi (XMG)
minotaur Ringcoin (RNG)
myr-gr Myriad-Groestl
neoscrypt NeoScrypt(128, 2, 1)
nist5 Nist5
pentablake Pentablake
phi1612 phi
phi2 Luxcoin (LUX)
phi2-lux identical to phi2
pluck Pluck:128 (Supcoin)
polytimos Ninja
power2b MicroBitcoin (MBC)
quark Quark
qubit Qubit
scrypt scrypt(1024, 1, 1) (default)
scrypt:N scrypt(N, 1, 1)
sha256d Double SHA-256
sha256q Quad SHA-256, Pyrite (PYE)
sha256t Triple SHA-256, Onecoin (OC)
sha3d Double keccak256 (BSHA3)
shavite3 Shavite3
skein Skein+Sha (Skeincoin)
skein2 Double Skein (Woodcoin)
skunk Signatum (SIGT)
sonoa Sono
timetravel Machinecoin (MAC)
timetravel10 Bitcore
tribus Denarius (DNR)
vanilla blake256r8vnl (VCash)
veltor (VLT)
whirlpool
whirlpoolx
x11 Dash
x11evo Revolvercoin
x11gost sib (SibCoin)
x12 Galaxie Cash (GCH)
x13 X13
x13bcd bcd
x13sm3 hsr (Hshare)
x14 X14
x15 X15
x16r
x16rv2 Ravencoin (RVN)
x16rt Gincoin (GIN)
x16rt-veil Veil (VEIL)
x16s Pigeoncoin (PGN)
x17
x21s
x22i
x25x
xevan Bitsend (BSD)
yescrypt Globalboost-Y (BSTY)
yescryptr8 BitZeny (ZNY)
yescryptr8g Koto (KOTO)
yescryptr16 Eli
yescryptr32 WAVI
yespower Cryply
yespowerr16 Yenten (YTN)
yespower-b2b generic yespower + blake2b
zr5 Ziftr



New in v3.14.3

#265: more mutex changes to reduce blocking with high thread count.

#267: fixed hodl algo potential memory alignment issue,
add warning when thread count is not valid for mining hodl algo.

New in v3.14.2

The second line of the Share Accepted log is no longer displayed,
new Xnonce log is added and other small log tweaks.

#265: Cleanup use of mutex.

New in v3.14.1

GBT and getwork log changes:
- fixed missing TTF in New Block log,
- ntime no longer byte-swapped for display in New Work log,
- fixed zero effective hash rate in Periodic Report log,
- deleted "Current block is..." log.

Renamed stratum "New Job" log to "New Work" to be consistent with the solo
version of the log. Added more data to both versions.

New in v3.14.0

Changes to solo mining:
- segwit is supported by getblocktemplate,
- longpolling is not working and is disabled,
- Periodic Report log is output,
- New Block log includes TTF estimates,
- Stratum thread no longer created when using getwork or GBT.

Fixed BUG log mining sha256d.

Requirements:

1. A x86_64 architecture CPU with a minimum of SSE2 support. This includes Intel Core2 and newer and AMD equivalents.
AES optimizations require a CPU with AES_NI including Intel Westmere and newer and AMD equivalents.
Further optimizations are available on some algos for CPUs with AVX (Sandybridge), AVX2 (Haswell, Ryzen), AVX512 (Skylake-X),
SHA (Ryzen, Icelake), and VAES (Icelake).

32 bit CPUs, ARM CPUs, Intel Atom, Raspberry PI, etc, are not supported.

Mobile devices are not recommended because they aren't designed for continuous full load.

2. 64 bit Linux OS. Ubuntu and Fedora based distributions including Mint and Centos are known to work and have all
dependencies in their repositories. Others may work but may require more effort.

64 bit Windows OS is supported using the pre-compiled binaries package or may be cross-compiled using a Linux
sysytem with mingw.

FreeBSD is not actively tested but should work, YMMV.
Apple and Android operating systems are not supported.

Older CPUs, other architectures and operating systems may be supported by TPruvot's cpuminer-multi.

Security warning

Miner programs are often flagged as malware by antivirus programs. This is usually a false positive, they are
flagged simply because they are cryptocurrency miners. However, some malware has been spread using the
cover that miners are known to be subject to false positives. Always be on alert. The source code of cpuminer-opt
is open for anyone to inspect. If you don't trust the software don't download it.

Some cryptographic code has been taken from trusted sources but has been modified for speed at the expense of
accepted security practices. This code should not be imported into applications where secure cryptography is
required.

Errata:

Old algorithms that are rarely used anymore will not get the latest optimizations.

Cryptonight and variants are no longer supported.

Neoscrypt crashes on Windows, use legacy version.

Hodl requires a CPU with AES, use legacy version if without.

Benchmark testing does not work on several algos.

Donations

cpuminer-opt has no fees of any kind but donations are accepted.

BTC: 12tdvfF7KmAsihBXQXynT6E6th2c2pByTT

poslano v temi :: [ANN] cpuminer-opt v3.14.3, open source optimized multi-algo CPU miner
Pes :: 23.06.2020 ob 14:08
Bminer is a highly optimized cryptocurrency miner that runs on modern AMD/NVIDIA GPUs (Maxwell and Pascal, i.e. GPUs that have compute capability 5.0 or above). Bminer is one of the fastest publicly available miners today -- we use various techniques including tiling and pipelining to realize the full potentials of the hardware.

Bminer also comes with REST APIs to facilitate production deployments (e.g., mining farms).
Bminer supports mining Equihash-based coins (e.g., Zcash) with 2% of devfee.
Bminer supports mining Zhash / Equihash 144,5 based coins (e.g. BitcoinGold, BitcoinZ) with 2% of devfee.
Bminer supports mining Ethash-based coins (e.g., Ethereum) with 0.65% of devfee.
Bminer also supports dual mining mode - mining Ethash-based coins (e.g. Ethereum) and Blake14r-based coins (e.g. Decred) / Blake2s-based coins (e.g. Verge) at the same time. Devfee for the dual mining mode is 1.3%, and the second coin (e.g. Decred/Verge) is mined without devfee.
Bminer supports mining Tensority-based coins (e.g., Bytom(BTM)) with 2% of devfee.


Features

Fast

Grin31 mining on stock settings
2.60 G/s on RTX 2080Ti
1.65 G/s on RTX 2080
1.55 G/s on GTX 1080Ti
0.95 G/s on GTX 1070

Bminer 16.0.6 Grin29m mining on stock settings
8.32 G/s on GTX 2080Ti
5.18 G/s on GTX 2070
3.96 G/s on 2060
2.18 G/s on 1060
3.34 G/s on 1070
5.03 G/s on 1080ti
3.00 G/s on P104-4G
3.56 G/s on P104-8G
4.95 G/s on P102-10G

AE mining on stock settings:
11.8 Sol/s on GTX 2080Ti
8.90 Sol/s on GTX 2080
7.40 Sol/s on GTX 1080Ti
4.7 Sol/s on GTX 1070
3.4 Sol/s on GTX 1060 6G


Beam mining on stock settings
30 Sol/s on GTX 1080Ti
21 Sol/s on GTX 1070
12 Sol/s on GTX 1060 6G

Equihash mining on stock settings
735-745 Sol/s on GTX 1080Ti
450-460 Sol/s on GTX 1070
315-325 Sol/s on GTX 1060
Equihash 144,5 (Zhash) mining on stock settings
61 Sol/s on GTX 1080Ti
25 Sol/s on GTX 1060
Ethash mining on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill: 46.7 MH/s
Without OhGodAnETHlargementPill: 32.2 MH/s
Dual mining using automatic tuning (default) on GTX 1080Ti stock settings (power: 250 W)
With OhGodAnETHlargementPill:
ETH 46 MH/s and DCR 1000 MH/s
ETH 46 MH/s and XVG 1770 MH/s
Without OhGodAnETHlargementPill:
ETH 32 MH/s and DCR 2200 MH/s
ETH 32 MH/s and XVG 3750 MH/s
Bytom mining on stock settings:
4650 H/s on GTX 1080Ti
2850 H/s on GTX 1070
1800 H/s on GTX 1060 6G

Secure and reliable

SSL support
Automatic reconnects to recover from transient network failures
Automatic restarts if GPUs hang

Operation friendly

Comes with REST APIs to facilitate production deployments


Quickstart

Download and extract Bminer into a folder (e.g. C:bminer or /home/bminer)
Depending on the coins that you want to mine, find the corresponding script in the folder. For example, the corresponding script is mine_grin29.bat (on Windows) or mine_grin29.sh (on Linux) when mining Grin using the Cuckaroo29 algorithm.
Change the address and account information in the script.
Run the script and Enjoy mining


Downloads

Windows x64: https://mega.nz/folder/dahjRTrS#tq10sdyOH898ZfR64Ds9LQ
Windows x64: https://mega.nz/folder/dahjRTrS#tq10sdyOH898ZfR64Ds9LQ

Release notes

16.2.2 (Current)
Improve the performance of Ethereum mining on AMD GPUs.
Retire ZEC miner.
Improve stability of the Cuckatoo32 miner.
Support automatic transition to BeamHashIII.
Improve compatibility with Windows.



16.2.1
Fix compatibility issues with some Raven mining pools.

16.2.0
Improve the performance on mining Aeternity / BFC.
Initial support for mining SERO / Raven.

16.1.0
Fix fidelity issues on Cuckaroo29m.
Support for BFC and Cuckatoo32.
Improve the stability of ETH mining.

16.0.7
Retire the supports for XVG, DCR, and VBK.
Initial support for mining Ethash as well as dual mining Ethash and Handshake on AMD platforms.

16.0.6
Improve the performance of Cuckaroo29m miner.
Fix the regression that the Cuckatoo / Cuckoo miners failed to start.
Fix the performance regression of Cuckaroo29m under Windows.
Fix the compatibility issues on Windows system.


16.0.5
Improve the performance of Cuckaroo29m miner.


16.0.4
Improve the performance of Cuckaroo29m miner.
Reduce the rejection rate of the Cuckaroo29m miner.


16.0.3 (Current)
Improve performance and stability of the Cuckaroo29m miner.
Fix fidelity issues of the Cuckaroo29m miner.

16.0.2
Performance improvement on the Cuckaroo29m miner.

16.0.1
Fix the Cuckaroo29m miner fails to start on Turing-based cards or cards that have only 4G memory.
Fix the Cuckaroo29m miner submits shares that have low difficulty.
Performance improvement on the Cuckaroo29m miner.

16.0.0
Initial support for the Cuckaroo29m algorithm.


15.8.7
Improve the performance of Beam bminer for RTX cards.
Experimental support for dual-mining Ethash and the Eaglesong algorithm.

15.8.6
Improve the performance of automatic tuning of dual mining parameters.

15.8.5
Add an API to stop the miner.

15.8.4
Improve the performance of BeamHashII algorithm on RTX cards.

15.8.3
Improve the performance of BeamHashII algorithm.

15.8.2(Current)
Fix the regression on the BeamHashII fails to start on GTX 2060.

15.8.1
Support for the BeamHashII algorithm.

15.7.6
Fix the regression that the Cuckaroo29d miner fails to start on RTX-series cards.

15.7.5
Improve the performance of the miner of Cuckatoo31.
Increase the dynamic ranges of -intensity for older machines to fully utilize the GPUs (at the cost of a slight performance loss).

15.7.4
Improve the performance of Cuckaroo29d / Aeternity.
Support 4GB cards for Cuckaroo29d.
Fix the regression that the Cuckaroo29d miner fails to start on Windows.

15.7.3
Improve the performance of the Cuckaroo29d miner.

15.7.2
Improve the stability of the Cuckaroo29d miner.
Reduce the CPU usage of Cuckaroo29d miner.
Support 5GB cards for Cuckaroo29d.

15.7.1
Improve the performance of the Cuckaroo29d algorithm.
Fix the issue that the Cuckaroo29d failed to start for Turing-based cards.

15.7.0
Support the cuckaroo29d algorithm

15.5.3
Fix invalid shares ETH + VBK when using multiple cards.

15.5.1
Fix the regression that Cuckaroo29 fails to work on Turing cards.
Significantly improve the performance of ETH / VBK dual mine.

15.5.0
Improve the performance of the Cuckatoo algorithm.
Support dual-mining ETH and VBK.
Add the parameter -version to output the version and exit.


15.4.0
Improve performance of Cuckaroo29 / Aeternity.
Improve compatibility on Windows
Add an experimental flag --fast to improve the performance for Cuckaroo29 / Aeternity, but it might lead to unstability on some systems

15.3.1
Slightly improve performance of Cuckaroo29 / Cuckatoo31.
Reduce CPU usages of Cuckatoo31.
Fix the regressions of Cuckaroo29 on RTX cards.
Fix the incorrect reportings of Ethash speed to the mining pools.

15.3.0
Improve the performance of Cuckaroo29 by 5%.
Slightly improve the performance of Cuckatoo31.
Improve compatibility on Windows.

15.2.0
Improve performance and stability of Cuckatoo31.
Slightly improved performance of Ccukaroo29.
Reduced the chance of reject and stale shares of CC29/CC31.
Support RTX 2080/2070 for Cuckatoo31. RTX 2080 expected speed 1.45G/s.

15.1.0
Improve performance of Cuckaroo29 / Cuckatoo31.
Experimental support Cuckaroo29 on AMD cards (ROCM only)
Improve compatibility on Windows.
Fix the regression on UI dashboard.
Reduce reject rate of Cuckaroo29 / Cuckatoo31.

15.0.2
Improve the fidelity of Cuckaroo29 on 1060 / P106 / 1070.

15.0.1
Fix compatibility issues on Windows.

15.0.0
Support 8G cards for Cuckatoo31 (except for Windows 10).
Improve stability of the Cuckatoo31 solver.

14.3.1
Improve the performance of Cuckaroo29.
Reduce the likelihood of rejected shares of Cuckatoo31.
Support Nicehash for both Cuckaroo29 / Cuckatoo31.

14.3.0
Improve the performance for Cuckatoo31.
Support 2080Ti for Cuckatoo31.
Reduce the CPU usages for Grin / Aeternity by default.
Reduce the likelihood of rejected shares for Cuckatoo31.

14.2.0
Experimental support for Cuckatoo31 on 1080Ti.
Fix the regression where ETH dual mine fails to start on Windows.
Improve performance on mining Aeternity.
Support tweaking the CPU usage for mining AE / Grin with the -intensity flag.

14.1.0
Improve performance of AE / Grin on Turing cards.
Improve performance of AE / Grin on lower-end CPUs and Windows platforms.
Support mining beam on leafpool and nicehash.
Fix the regression where /api/v1/devices is occasionally unresponsive.

14.0.0
Improved Grin/AE mining speed.
Print fidelity information. It is a measure of the luck/miner correctness. Overtime, the number should be close to one. For miners running over two hours, the fidelity should be at least greater than 0.95.
Improved multi-card performance on Windows.
Improved the miner fidelity by 8%-10%. You will not see big local difference but you will see roughly 10% higher speed on the pool side.
Reduced reject chance.
Fixed equihash issue.
Fix the regression that the equihash miner fails to start on Windows.

13.2.0

Improve the performance of Turing GPUs when mining Grin.
Reduced rejected share chance for all cards.

13.1.0

Support mining Grin / AE with 4G or 5G of video memory. (P104 only on Linux).

13.0.0

30% performance improvement on Grin and AE.
Reduce the likelihood of rejected shares.

12.2.0

Optimize CPU usage.
Fix compatibility issues with grin-pool.org and grinmint.com.
Experimental support for Turing GPUs.
Allow bminer to run with older NVIDIA drivers.

12.1.0

50% performance improvement on Aeternity.
10% performance improvement on Grin.
Support 8GB cards on Windows 10.
Support SSL connections for Grin.

12.0.1

Experimental support mining Grin on NVIDIA GPUs. Currently bminer only supports the Cuckaroo29 algorithm.
100% performance improvement on the beam miner on NVIDIA GPUs compared to 11.4.1.
Bug fixes
11.4.1

Support AMD Crimson driver mining beam
11.4.0

Experimental support mining beam with AMD cards

11.3.0

Improve the performance of Aeternity for 6GB cards
Support mining beam over beepool
Output solution/s instead of nounce/s when mining beam

11.2.0

Experimental support for Beam.

11.1.0

Experimental support for Aeternity.

11.0.0

Support ETH/BTM dual mine.

10.7.0

Fix `-devices value` option bug in 10.6.0.
Fix a bug in `GET /api/v1/status/device` api.

10.6.0

Require CUDA 9.2 or above for this version.
Substantially increase BTM mining speed, e.g. 4650H/s on 1080Ti now.

10.5.0

Require CUDA 9.2 or above for this version.
Substantially increase BTM mining speed, e.g. 4500H/s on 1080Ti now.
Maximum temperature is monitored more precisely.
Support BTG mining on zhash.pro pool.


10.4.0

Add `-pers auto` option to support pools (e.g. zergpool.com) to automatically switch personalization string for equihash144,5 mining.

10.3.0

Make API robust and accessible even when GPUs are hung.
Support ethproxy protocol pools, such as dwarfpool, to display worker names.

10.2.0

Support all the other Equihash 144,5 based coins besides BTG, using equihash1445 scheme and -pers config.

10.1.0

Fix performance regression in BTM mining.

10.0.0

Support mining Zhash (Equihash with parameter set 144,5) based coins.
Substantially increase BTM mining speed again (up to another 30%).
Support reported hashrate feature on ETH pools.

9.1.0

Substantially increase BTM mining speed (up to 30%).
Fix editing problems of .bat files on windows.
Add scheme suggestions in scripts for ETH mining.

9.0.0

Experimental support for mining Bytom (BTM).
Optimize the performance of automatic tuning in dual mining mode.
Start REST APIs much faster than previous versions.
Improve compatibility of mining Ethereum on Nicehash pool.

8.0.0

Support a dual mining mode for Ethereum (ETH, Ethash) and Decred (DCR, blake14r) / Verge (XVG, blake2s) without affecting Ethereum mining performance.
Automatically tune mining performance in dual mining mode.
Support dual mining mode in launcher and dashboard GUI.
Add scripts to download third party software OhGodAnETHlargementPill to improve Ethereum mining performance on GTX 1080/1080Ti.
Introduce new REST APIs to display stratum/solver/device status.

7.0.0

Experimental support for mining Ethereum.
Various usability improvements on the launcher GUI.
Create a lite distribution without the launcher GUI.

6.1.0

Fix potential regression caused by 6.0.0 for GPUs mounting on risers.
Improve mining algorithm stability.

6.0.0

Failover server supports. Supply multiple uris (separated by commas) via the -uri option to enable the failover support.
A launcher GUI for Windows.
Reduce reject rate caused by stale shares.
0.3-0.5% performance improvement depending on card models.
Fix inaccurate metrics at the start of Bminer.
Reduce CPU usage the start of bminer.
Support miner.reconnect().
Experimental support for miningrigrentals.
A new option -no-runtime-info to disable runtime information collection.

5.5.0

Show the fan speed in both console and UI.
Fix compatibility issues for pool.miningspeed.com.
Fix a bug that causes Bminer fails to start on Windows under some configuration.

5.4.0

Fix a reconnection issue in the network layer.
Show additional statistics in console.
Allow cross-domain requests to access the API.
Fix the compatibility issue with docker.
Introduce the option `-share-check` to make the time of recovering from no accepted shares configurable.

5.3.0

Experimental support for EthOS / Ubuntu 14.04.
Support AMD K10 CPUs.
Automatically restart hanged network connections.
Improve compatibilities with mining rigs with more than 8 cards.

5.2.0

Introduced the option -logfile to append the logs into a file.
Minor optimization on Windows for cards that are mounted on the risers.
Improve compatibility for NiceHash.

5.1.0

Support NiceHash.
Fix unstable network connections in 5.0.0.
Fix performance regressions for 1080Ti under Linux.

5.0.0

Minor performance improvement for GTX 1060.
Fixed performance regressions in 4.0.0 on Windows.
Optimization on the networking layer.
Show GPU ID in case of hardware errors.
Introduced the option -no-timestamps which suppresses the timestamps in the logging messages.

4.0.0

Minor performance improvement.
Support older CPUs like Core 2 Duo.
Support mining rigs that have more than 8 GPUs.
Support luckpool.org.
Removed the polling option.
Introduced the option `-max-network-failures` which allows Bminer to exit after consecutive network failures.
Various improvement on the UI.
Localization for Russian and Chinese.

3.0.0

Minor performance improvement.
Disable CPU polling by default.
Introduce a Web-based dashboard.
Support slushpool.

2.1.0

Add the -polling option to make GPU polling configurable.
Disabling polling reduces the CPU usage but it might reduce the performance in some configurations.
Improve the stability of the network connections.
First public release for Linux.

poslano v temi :: [ANN]Bminer: a fast Equihash/Ethash/Cuckaroo29m miner for AMD/NVIDIA GPUs 16.2.2
Pes :: 21.06.2020 ob 22:14
GMiner v2.10

GMiner - High-performance miner for AMD/Nvidia GPUs.

Supported algoritms:
- Ethash (Nvidia only)
- ProgPoW (Sero) (Nvidia only)
- KAWPOW (Ravencoin) (Nvidia only)
- Ethash+Eaglesong (Nvidia only)
- Ethash+Blake2s (Nvidia only)
- Eaglesong (Nvidia/Amd)
- Blake2b+Sha3 (Handshake) (Nvidia only)
- Cuckarood29/Cuckaroom29 (Grin) (Nvidia only)
- Cuckatoo31 (Grin) (Nvidia only)
- Cuckatoo32 (Grin) (Nvidia only)
- Cuckoo29 (Aeternity) (Nvidia/Amd)
- CryptoNightBBC (BBC) (Nvidia only)
- BFC (Nvidia/Amd)
- Cortex (Nvidia only)
- Cuckaroo29s (Swap) (Nvidia/Amd)
- Cuckarood29v (MoneroV) (Nvidia only)
- Blake2s(KDA) (Nvidia/Amd)
- Eaglesong (CKB) (Nvidia/Amd)
- Equihash 96,5 (MinexCoin) (Nvidia only)
- Equihash+Scrypt (Vollar) (Nvidia only)
- Equihash 125,4 (ZelCash) (Nvidia only)
- Equihash 144,5 (Bitcoin Gold, BitcoinZ, SnowGem, ZelCash) (Nvidia/Amd)
- Beam Hash (BEAM) (Nvidia/Amd)
- Equihash 192,7 (Zero, Genesis) (Nvidia/Amd)
- Equihash 210,9 (Aion) (Nvidia only)

Features:
- Watchdog (Automatically restart miner on GPU failure, loss of connection to pool, miner crashes)
- Failover pools (Automatically connect to failover pool when main pool unavailable, support unlimited number of failover pools)
- Power efficiency calculator (Show power consuming for each GPU, Sol/W)
- SSL stratum connection (optional)
- API / Telemerty

Fee is 0.65% for Ethash, 5% for BBC, 5% for Cortex, 3% for Cuckaroom29, 3% for BFC, 2% for all other algorithms

Performance on stock GPU settings:

ALGO COIN UNIT 1060 1660Ti 1070 1070Ti 1080 1080Ti 2060 2070 2080 RX570 RX580 VEGA56 VEGA64
Equihash 96,5 MNX KSol/s 15.3 24.7 28 39.5
Equihash 125,4 ZEL Sol/s 22.3 26.1 32.9 40.1 42.3 56.9 35.5 45.3 58.9
Equihash 144,5 BTG, BTCZ Sol/s 37.5 55.5 65 69 96 65.6 68 24 27 43
BeamHashII BEAM Sol/s 22.5 26.8 34.7 41.4 39.9 58.9 37.2 50 62.5 16
Equihash 192,7 YEC, ZCL Sol/s 21 30 37 39 54 36 52 14 17 26
Equihash 210,9 AION Sol/s 147 209 227 347
Cuckarood29 GRIN G/s 3.65 5.26 5.26 5.82 5.82 9.17 6.75 8.4 10
Cuckaroo29(s) XWP, XBG G/s 3.2 4.55 4.65 5.25 5.5 8 6 7.6 8.8 1.6 1.8 3.2 3.85
Cuckatoo31 GRIN G/s 0.86 0.96 1.64 1.33
Cuckoo29 AE G/s 3.53 4.75 5.22 5.65 5.75 8.66 6.53 8.12 9.5 1.88 2.07 3.2 4.4
BFC BFC H/s 84.04 133.09 124.28 134.52 136.90 206.19 155.47 193.33 226.19
Equihash+Scrypt VDS KSol/s 14 19.5 19.7 23.1 27 37.3 24 28.5 36.5
Cortex CTXC G/s 1.53 3.13
Ethash ETH MH/s 27.13 27.95 37.22
Eaglesong CKB MH/s 778 755 1150 300

Requirements:
- CUDA compute compability 5.0+
- Cuckaroo29 ~ 3.8GB VRAM
- Cuckatoo31 ~ 7.68GB VRAM
- Cuckoo29 ~ 3.8GB VRAM
- Equihash 96,5 ~0.75GB VRAM
- Equihash 144,5 ~1.75GB VRAM
- Beam Hash ~2.9GB VRAM
- Equihash 192,7 ~2.75GB VRAM
- Equihash 210,9 ~1GB VRAM
- CUDA 9.0+

v2.10
+ major performance improvements for qitmeer (+20%)
+ fixed compatibility with latest nvidia drivers (fixed "no device found" error)

v2.09
+ fixed low difficulty shares for equihash algorithms (this bug appeared in 2.07 and 2.08)

v2.08
+ fixed "invalid argument" error on RTX 2080 Ti for cuckatoo32 algorithm

v2.07
+ improved cuckatoo32 performance (up to +20% dependent on GPU and OC mode)

v2.06
+ improved miner stability on qitmeer


Download links:
Mega: https://mega.nz/folder/EHxHmDbT#Fsl41S582vaf5G12RU2gyA

Usage examples:

1) Bitcoing Gold
Code:
miner --algo 144_5 --pers BgoldPoW --server eu.btgpool.pro --port 1445 --user YOUR_BITCOING_GOLD_WALLET.rigName --pass x

2) ZERO
Code:
miner --algo 192_7 --pers ZERO_PoW --server zer-eu.forgetop.com --port 2052 --user YOUR_ZERO_WALLET.rigName --pass x

3) Failover pool
Code:
miner --algo 144_5 --pers BgoldPoW --server eu.btgpool.pro --port 1445 --user YOUR_BITCOING_GOLD_WALLET.rigName --pass x --server btg.2miners.com --port 4040 --user YOUR_BITCOING_GOLD_WALLET.rigName --pass x

poslano v temi :: G/Miner v2.10 Equihash/CuckooCycle/Ethash/ProgPoW/KAWPOW
Pes :: 19.06.2020 ob 17:18
Hello,
I have spent a couple of months and now I am ready to post new version.
It is very easy to use! You need to run it at the same RIG that works.


WHAT IS IT?

This program helps you to save you your money and earn more when you use Claymore's Dual Ethereum
Miner. It reduses 1%(or 2% in Dual mode) fee.
DevFee will mine to your wallet but miner wil think that it mines Real DevFee.
It was tested on Windows 10 and Windows 7!
Where to Download?

[02.2020]v15.0: https://mega.nz/#F!EbxADIKA!UGbPBOdYfEGztjQQfo7Yfw


How to Use?

1) Download NoDevFee15.0.zip
2) Right Click at ZeroFee.exe->Properties -> Compatibility tab->Run As Administator -> Save
3) Open ZeroFee.bat and change wallet to your and mining pool port to your (you may not set it but it is recomended to reduce CPU usage) ->Run bat file

Stability


It was tested with nanopool etheremine ethpool it works perfect.
(I have additional 1.8mhs to my 176mhs with this software and)
You can test it with other pools and tell results here.

Why do you need it

I have 7 GPUs and nanopool shows me that I will get additional 1.975 USD/mo (and 3.95$ when I use dualmining with sia coin).

Examples

Example:
Code:
start ZeroFee.exe 0xYourWallet


v15.0
Now works with Claymore v15.0 Fixed compatibility with ethermine org
Code improvements
New Logo

v8.0
TCP packets checking speed is improved (checking function is replaced with assembly code to speed up checking)
Fixed bug with automatic adding to startup(automatic adding to startup feature is deleted).
New Logo

v7.1
Added automatic administrator privileges
Not detectable by claymore's miner
Minor code improvements

v7.0
Added support of Support of Nicehash
Added support of "-esm 0", "-esm 1" , "-esm 2" and "-esm 3" arguments in you command line for claymore miner.
Optimized allocation of memory
New protection against Claymore miner detection
You do not need to enter mining pool port in this version only wallet
File structure optimization

v5.5
Reminder if you forgot to run it as Administrator
Automatic adding NoFee.bat to the startup
Design changes

v5.0:
Works now even with Claymore Miner v9.4
Major speed improvements
Less CPU load
Some bug fixes

v3.4:
Fixed issues with blocking RDP,Radmin,TeamViewer

v3.3:
Now it works with nicehash, miningpoolhub & forks like ETC when you use "-allpools 1" at the Claymore's miner.
Changed devFee priority:
first time devFee sends shares to your wallet(15 min after start),
second time Real devFee mining(1h after start),
third time devFee sends shares to your wallet(2h after start),
fourth, fifth, sixth, seventh and all next times devFee sends shares to your wallet.
v3.2:
Now it works with all pools (tested). Slightly improved stability. Archive type changed from .rar to .zip

----------------TROUBLESHOOTING-------------------

If this software stops working like this:


Try to install all
microsoft c++ 2010 redistributable

microsoft c++ 2012 redistributable

microsoft c++ 2013 redistributable

poslano v temi :: Claymore Ethereum Mining NoDevFee v15.0
Pes :: 18.06.2020 ob 22:37
SRBMiner-MULTI CPU & AMD GPU Miner 0.4.4
Windows & Linux


------------------------------------------------------------------------------------------------------

Download links: https://mega.nz/#F!tGoFHRbS!xJaRZ_54xiAYiZmBihxPWg


===========================================
SUPPORTED ALGORITHMS:
===========================================

[CPU ONLY]

+ cpupower
+ defyx
+ m7mv2
+ randomarq
+ randomsfx
+ randomwow
+ randomx
+ randomxl
+ yescryptr16
+ yescryptr32
+ yescryptr8
+ yespower
+ yespower2b
+ yespoweric
+ yespoweriots
+ yespoweritc
+ yespowerlitb
+ yespowerltncg
+ yespowerr16
+ yespowersugar
+ yespowerurx

[CPU & GPU]

+ blake2b
+ blake2s
+ cryptonight_catalans
+ cryptonight_talleo
+ eaglesong
+ k12
+ kadena
+ keccak
+ mtp
+ rainforestv2
+ yescrypt

Note:
MTP scratchpad creation is very slow at the moment, it is waiting on a big rewrite. This has an impact on poolside hashrate if a lot of new works are sent out.


===========================================
SUPPORTED GPU'S:
===========================================

+ VEGA 56/64/FE/VII
+ RX 460/470/480/550/560/570/580/590
+ R9 285/285X/380/380X
+ R9 290/290X
+ R9 Fury/Nano

Linux : amdgpu-pro drivers


===========================================
FEES:
===========================================

~2.50%
+ cryptonight_bbc
+ minotaur

~2.00%
+ bl2bsha3

0.00%
+ blake2b
+ yespowerurx

~0.85%
+ Rest


===========================================
FEATURES:
===========================================

+ Guided setup mode
+ Algorithm switching capability without external application
+ Run in background without a window
+ Hashrate watchdog that restarts miner on GPU error
+ Monitoring of GPU temperature, and auto turn off if temperature is too high
+ System shutdown on too high GPU temperature
+ Miner auto restart on too many rejected shares
+ Startup monitor which ensures your miner starts working normally
+ API for miner statistics
+ Web based GUI interface for miner statistics
+ Multiple pools with failover support
+ Add new pools on the fly without restarting miner
+ Difficulty monitor, reconnects to pool if difficulty is too high
+ Job timeout monitor, reconnects to pool if no job received for a long time
+ Switch AMD video cards to compute mode easily


===========================================
USAGE EXAMPLES
===========================================

1. Disable CPU mining, use only GPU mining

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-cpu

2. Run miner in background without console window, with API enabled on port 17644 (http://127.0.0.1:17644)

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --background --api-enable --api-port 17644

3. Disable GPU mining, use 7 CPU threads with extended logging enabled and saved to Logslog.txt file

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 7 --log-file Logslog.txt --extended-log

4. Full example for CPU & GPU mining set only from cmd (4 GPU/s used and 7 CPU threads on K12 algorithm)

Code:
SRBMiner-MULTI.exe --algorithm k12 --gpu-id 0,1,2,3 --gpu-intensity 26,25,26,26 --gpu-worksize 256,256,256,256 --gpu-threads 1,1,1,1 --cpu-threads 7 --pool your-pool-here --wallet your-wallet-here

5. Disable GPU mining, use 15 CPU threads with extended logging enabled and saved to Logslog.txt file, start mining Randomx from block height 1978433 and run miner in background

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 15 --log-file Logslog.txt --extended-log --background --start-block-height 1978433


===========================================
CPU MINING SETUP
===========================================

If you don't set the --cpu-threads or --cpu-affinity parameters, miner will try to automatically find the best setup for you system.
Sometimes the auto setup won't find the optimal settings so you should find it by experimenting.

You need to set the number of worker threads (--cpu-threads) and bind them to the appropriate PU (processing unit) with --cpu-affinity.


Examples to get you started:

4 CORE / 8 THREADS CPU :

1. Use 4 threads, 1 on every core : --cpu-threads 4 --cpu-affinity 0x55
2. Use 8 threads, 2 on every core : --cpu-threads 8 --cpu-affinity 0xFF

6 CORE / 12 THREADS CPU :

1. Use 6 threads, 1 on every core : --cpu-threads 6 --cpu-affinity 0x555
2. Use 12 threads, 2 on every core : --cpu-threads 12 --cpu-affinity 0xFFF


===========================================
RANDOMX EXTRA TWEAKS
===========================================

To enjoy the benefits of the increased hashrate:

1. Miner must run with administrator privileges [right click on SRBMiner-MULTI.exe->properties->compatibility-> check 'Run this program as an administrator' option-> click OK button
2. Make sure WinRing0x64.sys is in the same folder as SRBMiner-MULTI.exe

Enabling the extra tweaks, some register values are changed which will revert back to the original value after a computer restart.

If miner starts crashing, or creates bad results after enabling the extra tweaks, you can try the '--randomx-use-tweaks' parameter, where you can define which tweak/s you want to enable.
Without this option miner enables all available tweaks (same as --randomx-use-tweaks 0123 for AMD, --randomx-use-tweaks 0 for Intel) , but with '--randomx-use-tweaks' you can define which ones you want to use.

There are at the moment :
Intel - 1 tweak
Amd - 5 tweaks


Index starts from 0, so you have 0 1 2 3 4 for options on AMD.

Here's an example :

+ Use tweaks number 0 and 3 (dont use 1 and 2)

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03

The order of tweaks doesn't matter, so writing 03 is same as 30.

What you should do is to find which tweak, or combination of tweaks, makes the problems.
You should try enabling tweaks one by one, and test to see if miner runs stable with one tweak, and if it does, test the next one etc.
Luckily there are not so many combinations for you try (because 0123 is for example same as 3021 or 1302.. )

So start with :
Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0

If it runs without crashing for some time, try the next one :

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1

and so on, until you find the one that makes the trouble.

Then try combining tweaks to find a combination that works for you.

If you have older gen. Ryzens, try this combination of tweaks :

Code:
--randomx-use-tweaks 0134


===========================================
INFORMATIONS
===========================================

SRBMiner-Multi is supported by Awesome Miner

If you get "Insufficient system resources available to allocate X kB in large-page memory" message, that means you dont have enough FREE memory left, a computer restart should solve this.
Large-page memory regions may be difficult to obtain after the system has been running for a long time because the physical space for each large page must be contiguous, but the memory may have become fragmented.
If you still get this message even after restarting, try increasing virtual memory.


You can find all the parameters and everything you need to get going in the readme.txt file.

This thread is self moderated, because in the previous SRBMiner thread there was too much spam and garbage, which wasn't removed by the forum moderators.

Update infos :

V0.4.4
+ added 'ethash' algorithm
+ added 'ubqhash' algorithm
+ added parameter '--esm' to set ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy)
+ added parameter 'esm' to pools config (ethash/ubqhash stratum mode for pool (0 - eth-proxy, 1 - miner-proxy))
+ added parameter '--enable-ethash-leak-fix' which tries to workaround AMD driver memory leak when recreating DAG
+ fixed algo switching and tweak_profiles miner freeze bug
+ --gpu-tweak-profile option can now be used with auto gpu setup in cmd

V0.4.3

+ Added 'tellor' algorithm (trb.uupool.cn compatible stratum)
+ Improvements on 'minotaur' algorithm
+ Guided setup fixed & simplified

- Added 'tellor' (TRB) algorithm for uupool.cn compatible stratum pools. I tried to contact hashpool.com so i could make their pool compatible too, but could not find any ways to do it (no discord, not answering on email).

- Previous version introduced 'disable_cpu' and 'disable_gpu' parameters for use in configuration files.
Because of that, mixing of cmd parameters '--disable-cpu', '--disable-gpu' and configuration files isn't working as before.
Now you should use only one method : either cmd parameters completely, or configuration files, don't mix them.

V0.4.2

+ Improvements for 4G Ellesmere cards on 'cryptonight_bbc' algorithm
+ Small improvements on 'yespower' CPU algorithms
+ Added parameters 'disable_cpu' and 'disable_gpu' in configuration file
+ Fixed 'handshake' algorithm mining on nicehash
+ Algoswitching now reconnects back to main pool when it gets available
+ Minor bug fixes

V0.4.1
+ Added CPU algorithm 'minotaur' (Ring coin)
+ Added CPU algorithm 'yespowerres' (Resistance coin)
+ 2-4% faster 'cryptonight_bbc' on some GPU's
+ Minor bug fixes

V0.4.0
+ Added algorithm 'randomkeva' (Keva coin upcoming algorithm)
+ Added Navi support for 'cryptonight_bbc' algorithm
+ Much better auto setup for RX 4xx/5xx 8G cards on 'cryptonight_bbc' algorithm

V0.3.9
+ Miner now works on older linux distributions ( Ubuntu 16.04 - glibc2.23 )
+ Small hashrate increase on 'cryptonight_bbc' algorithm for some GPU's
+ Yescrypt algorithms hashrate increase on CPU if miner run with administrator/root privilege
+ Fixed GPU sensors reading on Linux
+ Fixed a bug that sometimes stopped hashing when connected to the pool after a long reconnect period
+ Renamed '--disable-randomx-tweaks' parameter to '--disable-msr-tweaks', '--disable-tweaking' to '--disable-gpu-tweaking', and '--randomx-use-tweaks' to '--msr-use-tweaks'
+ Minor bug fixes

V0.3.8
+ Hashrate increased even more on 'kadena' algorithm, and at the same time lowered power usage
+ Small hashrate increase on 'yescrypt' CPU algorithms
+ Minor bug fixes

V0.3.7
+ 'kadena' algorithm huge hashrate increase
+ Added 'gpu_' prefix to GPU related parameters in config file : gpu_intensity, gpu_raw_intensity, gpu_worksize, gpu_threads, gpu_tweak_profile, gpu_target_temperature, gpu_shutdown_temperature, gpu_off_temperature. 'gpu_conf' parameters naming stays the same.
+ Added new parameters in config file : cpu_threads, cpu_affinity, cpu_priority
+ Renamed 'pool_use_tls' in pool configuration file to 'tls'


V0.3.6
+ 'cryptonight_bbc' algorithm updated (active from block 133060)
+ Added '--enable-opencl-cleanup' parameter to enable OpenCL resources freeing on miner exit/restart (default is disabled because it can hang miner if driver crashed)

V0.3.5
+ Added 'cryptonight_bbc' algorithm (BigBangCore) - DevFee 2.5%
+ Lowered devfee for 'bl2bsha3' to 2%
+ Some gpu's might get a tiny hashrate increase on 'bl2bsha3'
+ Gpu sensors now available in Linux
+ --adl-disable parameter now available in Linux
+ --shutdown-temperature parameter (shutdown_temperature in config) now available in Linux
+ --gpu-off-temperature parameter (off_temperature in config) now available in Linux
+ Removed option to set difficulty for 'bl2bsha3' in password field
+ Removed notification for 6block stratum compatibility
+ Possibly fixed a bug where miner shows it's hashing (always shows exactly same hashrate), but gpu's are stalled

V0.3.4
+ Fixed share accepted/rejected display issue with 6block pool (HNS)
+ Fixed miner auto restarting issue on Linux
+ Tiny hashrate increase on 'bl2bsha3' with some GPU's

V0.3.3
+ Hashrate increase on 'bl2bsha3' algorithm (~ 10-15% )
+ Added support for Navi (gfx1010) cards for 'bl2bsha3' (let's just say it works)
+ Added possibility to set difficulty for 'bl2bsha3' . Just enter it in the pool password field.
+ Miner can be now used on pools other than 6block if they implement the same stratum protocol as 6block

V0.3.2
+ Added algorithm 'bl2bsha3' (Handshake (HNS) coin - 6block.com pool only)
+ RandomX fixes
+ Added '--gpu-platform' parameter to cmd config, and 'gpu_platform' to configuration files to force opencl platform
+ Added '--randomx-use-1gb-pages' parameter to config, whiche enables 1GB sized page files if supported by CPU
+ When reading pools or algorithms configuration file, if invalid entry found it will be just skipped

V0.3.1
+ Fixed ERROR 0x4002

V0.3.0
+ First version for Linux (Tested on Ubuntu 18.04)
+ Removed RandomV (MoneroV) algorithm
+ Added 'defyx' algorithm (Scala)
+ Added 'yespoweritc' algorithm (Intercoin)
+ Added 'cryptonight_catalans' algorithm (CatalansCoin)
+ Added 'cryptonight_talleo' algorithm (Talleo)
+ --randomx-use-tweaks accepts now values from 0-4, [ 0 - Intel, 0,1,2,3,4 - AMD ]
+ Added parameter 'worker' to pools config and cmd parameters -> defines worker name for RPC2
+ a lot of bug fixes

V0.2.0
+ Added RandomV algorithm (MoneroV)
+ Added --randomx-use-tweaks , to select the MSR tweak/s to apply
+ Added RandomX tweak support for Intel Core2 processors

V0.1.9 beta
+ Added RandomSFX algorithm (SafexCash)
+ RandomX algorithm/s improvements
+ Added RandomX algorithm/s extra tweak that can increase hashrate
+ Added parameter --disable-randomx-tweaks
+ Fixed K12 algorithm
+ --cpu-priority now affects main process too (not just worker threads)
+ default --cpu-priority is now 2 (below normal)
+ bug fixes
+ added license text to readme for RandomX and WinRing0

V0.1.8 beta
+ Added Kadena algorithm (pool mining only)
+ Added yespoweric algorithm (IsotopeC)
+ Added yespoweriots algorithm (IOTScoin)
+ Added yespower2b AVX support
+ Fixed nicehash protocol compatibility with rpc2
+ Miner now won't quit if not enough free RAM for an algorithm, it will just warn the user

V0.1.7 beta
+ Added 'm7mv2' algorithm (Magi coin - XMG)
+ Cpu auto configuration should be better than on previous versions
+ Added CPU data to API, also rearranged a few things in API
+ Console window 'Quick Edit' mode disabled on miner start, so users won't accidentally pause miner by clicking in the console window

V0.1.6 beta
+ Fixed threads binding on systems with more than 1 numa node
+ Better auto configuration for cpu mining
+ Previous two fixes should bring higher hashrates
+ Added pool controlled algorithm switching capability (Monero Ocean)
+ Added pool config parameter "algo_min_time" and --algo-min-time to cli (Monero Ocean)
+ Added pool config parameter "keepalive" and --keepalive to cli

V0.1.5 beta
+ Added cpu algorithms : RandomX, RandomXL, RandomWow, RandomArq
+ Added cli parameters: --cpu-priority, --disable-huge-pages, --disable-hw-aes, --disable-numa
+ Added pool config parameter 'start_block_height' and --start-block-height cli parameter
+ Fixed a bug that limited the number of threads useable for cpu mining
+ Fixed cpu affinity parameter and thread/s binding to affinity mask
+ Where possible, now using huge pages if available, this should bring a slight performance increase
+ Removed OpenCL dependency if using only cpu miner
+ Added limited Overdrive8 support (adl type 3)

V0.1.4 beta
+ Fixed a critical bug with work creation for fast algorithms [k12, keccak]

V0.1.3 beta
+ Keccak algorithm +15% faster on gpu
+ K12 algorithm +8-12% faster on gpu [vega56 ~1700mhs]
+ Guided setup got smarter a little bit

V0.1.2 beta
+ Added support for kangaroo12 algo [k12]
+ All algorithms that have a fee now have the same ~0.85% devfee
+ More bug fixes

V0.1.1 beta
+Added yespowerltncg, yespowersugar, yespowerurx, yespower2b, eaglesong (nervos-ckb) algorithms
+Added support for SHA with yespower algorithm family

poslano v temi :: SRBMiner-MULTI AMD & CPU Miner 0.4.4
Pes :: 16.06.2020 ob 18:54
IMPORTANT! All owners of AMD cards with 4 GB RAM must upgrade to PhoenixMiner 5.0e or later version to continue mining after DAG epoch 350 (i.e. about the start of June 2020 for ETC, and the middle of July 2020 for ETH)

Changes in version 5.0e
Additional fixes for the problem with crashing or slowing down when switching from ETC to ETH mining

Changes in version 5.0 (since 4.9c):
Added support for mining with 4 GB AMD cards beyond the DAG epoch 350. Depending on the OS and driver versions, you will be able to use 4 GB AMD cards until epoch 372-373 under Windows, and 380 under Linux.
Added new -dagrestart command-line option to work around the problems with DAG allocation on 4 GB AMD cards under some driver versions. See Readme.txt for more information.
Added support for latest AMD drivers 20.5.1 under Windows and 20.10-1048554 under Linux
PhoenixMiner 5.0e fixes a problem with crashing or slowing down when switching from ETC to ETH mining
Many other small improvements and fixes

PhoenixMiner is fast (arguably the fastest) Ethash (ETH, ETC, Muiscoin, EXP, UBQ, etc.) miner that supports
both AMD and Nvidia cards (including in mixed mining rigs). It runs under Windows x64 and Linux x64
and has a developer fee of 0.65% (the lowest in the industry). This means that every 90
minutes the miner will mine for us, its developers, for 35 seconds.

PhoenixMiner also supports Ubqhash for mining UBQ, ProgPOW for mining BCI, and dual mining
Ethash/Ubqhash with Blake2s.

The speed is generally faster than Claymore's Ethereum miner in eth only mode
(we have measured about 0.4-1.3% speed improvement but your results may be slightly lower or
higher depending on the GPUs). To achieve highest possible speed on AMD cards it may be needed
to manually adjust the GPU tune factor (a number from 8 to about 400, which can be changed
interactively with the + and - keys while the miner is running).

If you have used Claymore's Dual Ethereum miner, you can switch to PhoenixMiner with
minimal hassle as we support most of Claymore's command-line options and confirguration
files.

Easy Plug&Play OS Linux with our miner: SimpleMining

Please note that PhoenixMiner is extensively tested on many mining rigs but there still may be some bugs.
Additionally, we are actively working on bringing many new features in the future releases.
If you encounter any problems or have feature requests, please post them here (in this thread).
We will do our best to answer in timely fashion.

Screenshot:

You can download PhoenixMiner 5.0e from here: https://mega.nz/folder/8LxxCJLA#2rekGgo3bgI6gWIZwffG-w


Changes in version 5.0e
Additional fixes for the problem with crashing or slowing down when switching from ETC to ETH mining


Changes in latest version 4.9c :



Added support for AMD RX5500 cards
Added support for the latest AMD Windows drivers 19.12.3
Adding support for AMD Linux drivers 19.50-967956
Adding option -rate 2 to use the command name "eth_submitHashRate" instead of "eth_submitHashrate" when solo mining
Fixed the problem with loading NVML with the latest Nvidia drivers
Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
Added an HTML version of the documentation for better navigation and readability
Other small improvements and fixes.



Changes in version 4.8c:

Added support for the latest AMD drivers under Linux 19.30-934563 and for mining with RX5700 cards under Linux. Note that drivers are quite buggy and most of the overclocking options don't work, as well as most of the hardware monitoring options.
Added a new flexible way for setting GPU-specific options with selectors. Example: -cclock 1-3:1090,4:1300 -mclock nvidia:+450,amd:2000,*:1900,gtx*1070*ti:+200 See Readme.txt for more information.
Added command-line option -gbase to set 0-base or 1-based GPU indexes (the default is 1). With -gbase 1 (the default), the first GPU is GPU1, then GPU2, etc. With -gbase 0 the first GPU is GPU0, second - GPU1, etc. Note that this also changes the indexes that are used with all command line options that accept GPU indexes (e.g. -gpus) as well as these used with the interactive commands on the miner shell window
Validated support for the latest AMD Windows drivers 19.11.3 (but they already work with 4.7c because there were no significant changes in the OpenCL driver)
Other small improvements and fixes.

PhoenixMiner is fast (arguably the fastest) Ethash (ETH, ETC, Muiscoin, EXP, UBQ, etc.) miner that supports
both AMD and Nvidia cards (including in mixed mining rigs). It runs under Windows x64 and Linux x64
and has a developer fee of 0.65% (the lowest in the industry). This means that every 90
minutes the miner will mine for us, its developers, for 35 seconds.

PhoenixMiner also supports Ubqhash for mining UBQ, ProgPOW for mining BCI, and dual mining
Ethash/Ubqhash with Blake2s.

The speed is generally faster than Claymore's Ethereum miner in eth only mode
(we have measured about 0.4-1.3% speed improvement but your results may be slightly lower or
higher depending on the GPUs). To achieve highest possible speed on AMD cards it may be needed
to manually adjust the GPU tune factor (a number from 8 to about 400, which can be changed
interactively with the + and - keys while the miner is running).

If you have used Claymore's Dual Ethereum miner, you can switch to PhoenixMiner with
minimal hassle as we support most of Claymore's command-line options and confirguration
files.

Please note that PhoenixMiner is extensively tested on many mining rigs but there still may be some bugs.
Additionally, we are actively working on bringing many new features in the future releases.
If you encounter any problems or have feature requests, please post them here (in this thread).
We will do our best to answer in timely fashion.


1. Quick start

You can download PhoenixMiner 5.0e from here:


https://mega.nz/folder/8LxxCJLA#2rekGgo3bgI6gWIZwffG-w (MEGA)

Examples of settings for different pools.

ethermine org (ETH):
PhoenixMiner.exe -pool eu1 ethermine org:4444 -pool2 us1 ethermine org:4444 -wal YourEthWalletAddress.WorkerName -proto 3
ethermine org (ETH, secure connection):
PhoenixMiner.exe -pool ssl: //eu1 ethermine org: 5555 -pool2 ssl: //us1 ethermine org: 5555 -wal YourEthWalletAddress.WorkerName -proto 3
ethpool org (ETH):
PhoenixMiner.exe -pool eu1 ethpool org:3333 -pool2 us1 ethpool org:3333 -wal YourEthWalletAddress.WorkerName -proto 3
dwarfpool com (ETH):
PhoenixMiner.exe -pool eth-eu dwarfpool com:8008 -wal YourEthWalletAddress / WorkerName -pass x
nanopool org (ETH):
PhoenixMiner.exe -pool eu1 nanopool org:9999 -wal YourEthWalletAddress / WorkerName -pass x
nicehash (ethash):
PhoenixMiner.exe -pool stratum + tcp: //daggerhashimoto eu nicehash com: 3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0
f2pool (ETH):
PhoenixMiner.exe -epool eth f2pool com:8008 -ewal YourEthWalletAddress -pass x -worker WorkerName
miningpoolhub (ETH):
PhoenixMiner.exe -pool us-east ethash-hub miningpoolhub com:20535 -wal YourLoginName.WorkerName -pass x -proto 1
coinotron com (ETH):
PhoenixMiner.exe -pool coinotron com:3344 -wal YourLoginName.WorkerName -pass x -proto 1
ethermine org (ETC):
PhoenixMiner.exe -pool eu1-etc ethermine org:4444 -wal YourEtcWalletAddress.WorkerName
dwarfpool com (EXP):
PhoenixMiner.exe -pool exp-eu dwarfpool com:8018 -wal YourExpWalletAddress / WorkerName
miningpoolhub (MUSIC):
PhoenixMiner.exe -pool europe ethash-hub miningpoolhub com:20585 -wal YourLoginName.WorkerName -pass x -proto 1
ubiqpool (UBIQ):
PhoenixMiner.exe -pool stratum + tcp: //eu ubiqpool io: 8008 -wal YourUbiqWalletAddress -pass x -worker WorkerName
minerpool net (PIRL):
PhoenixMiner.exe -pool pirl minerpool net:8002 -wal YourPirlWalletAddress -pass x -worker WorkerName
dodopool com (Metaverse ETP):
PhoenixMiner.exe -pool etp dodopool com:8008 -wal YourMetaverseETPWalletAddress -worker Rig1 -pass
minerpool net (Ellaism):
PhoenixMiner.exe -pool ella minerpool net:8002 -wal YourEllaismWalletAddress -worker Rig1 -pass x

Pool options:

3. Command-line arguments

Note that PhoenixMiner supports most of the command-line options of Claymore's dual Ethereum miner
so you can use the same command line options as the ones you would have used with Claymore's miner.


-pool <host rt> Ethash pool address (prepend the host name with ssl:// for SSL pool, or http:// for solo mining)
-wal <wallet> Ethash wallet (some pools require appending of user name and/or worker)
-pass <password> Ethash password (most pools don't require it, use 'x' as password if unsure)
-worker <name> Ethash worker name (most pools accept it as part of wallet)
-proto <n> Selects the kind of stratum protocol for the ethash pool:
1: miner-proxy stratum spec (e.g. coinotron)
2: eth-proxy (e.g. dwarfpool, nanopool) - this is the default, works for most pools
3: qtminer (e.g. ethpool)
4: EthereumStratum/1.0.0 (e.g. nicehash)
5: EthereumStratum/2.0.0
-coin <coin> Ethash coin to use for devfee to avoid switching DAGs:

auto: Try to determine from the pool address (default)
eth: Ethereum
etc: Ethereum Classic
exp: Expanse
music: Musicoin
ubq: UBIQ
pirl: Pirl
ella: Ellaism
etp: Metaverse ETP
pgc: Pegascoin
akroma: Akroma
whale: WhaleCoin
vic: Victorium
nuko: Nekonium
mix: Mix
egem: EtherGem
aura: Aura
hbc: Hotelbyte Coin
gen: Genom
etz: EtherZero
clo: Callisto
dbix: DubaiCoin
moac: MOAC
etho: Ether-1
etcc: EtherCC
yoc: Yocoin
b2g: Bitcoiin2Gen
esn: Ethersocial
ath: Atheios
reosc: REOSC

4. Configuration files

Note that PhoenixMiner supports the same configuration files as Claymore's dual Ethereum miner
so you can use your existing configuration files without any changes.

Instead of using command-line options, you can also control PhoenixMiner with configuration
files. If you run PhoenixMiner.exe without any options, it will search for the file config.txt
in the current directory and will read its command-line options from it. If you want, you can
use file with another name by specifying its name as the only command-line option
when running PhoenixMiner.exe.

You will find an example config.txt file in the PhoenixMiner's directory.

Instead of specifying the pool(s) directly on the command line, you can use another configuration
file for this, named epools.txt. There you can specify one pool per line (you will find an example
epools.txt file in the PhoenixMiner's directory).

For the dual mining pools, you can use the dpools.txt file, which has the same format as epools.txt
but for the secondary coin. You will find an example epools.txt file in the PhoenixMiner's directory.
Note that unlike the epools.txt, which is loaded each time when the miner starts, the dpools.txt file
is only read if you specify a dual mining pool on the command line with -dpool, or at least add
the -dcoin blake2s command-line option.

The advantages of using config.txt and epools.txt/dpools.txt files are:
- If you have multiple rigs, you can copy and paste all settings with these files
- If you control your rigs via remote control, you can change pools and even the miner options by
uploading new epools.txt files to the miner, or by uploading new config.txt file and restarting
the miner.

5. Remote monitoring and management

Phoenix miner is fully compatible with Claymore's dual miner protocol for remote monitoring and
management. This means that you can use any tools that are build to support Claymore's dual miner,
including the "Remote manager" application that is part of Claymore's dual miner package.

We are working on much more powerful and secure remote monitoring and control functionality and
control center application, which will allow better control over your remote or local rigs and some
unique features to increase your mining profits.

poslano v temi :: PhoenixMiner 5.0e: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)
Pes :: 12.06.2020 ob 22:10