PRIJAVI SE
in sodeluj na forumu, komentiraj, ocenjuj... Registriraš se v samo 10ih sekudah!
Bitcoin Slovenija
 

Zadnja sporočila


vajda :: 07.05.2020 ob 15:39
Res super preverjena stran z rednimi izplačili in povsem brezplačno . Potrebna je samo registracija in že pridobivate ethereume povsem brez vsakega vložka. Zelo priporočam.

link

poslano v temi :: Ethereum za vsakogar
Pes :: 06.05.2020 ob 20:14


NBMiner


GPU Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB.



Download


Download From Mega Release: NBMiner v30.2


Performance (stock frequency)
Code: http://api_hostort/ in your browser to use web monitor.
Default: http://127.0.0.1:22333

Features
Support Windows & Linux.
Support backup mining pool configuration.
Support SSL connection to mining pools.

Dev Fee

tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%
hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%


Performance (stock frequency)

Code:
| Algorithm | Coin | P106-100 | P104-8G | 1070ti | 1080ti | 2080 | RX580 2048sp |
| :--------------- | :-----: | :--------: | :--------: | :--------: | :------: | :------: | :----------: |
| tensority | BTM | 1,900 | 3000 | 3,400 | 5,000 | 11,500 | X |
| ethash | ETH | 21.2M | 34.5M | 26.9M | 46M | 35.5M | X |
| tensority_ethash | BTM+ETH | 950+15.5M | 1600+26.5M | 1350+22M | 2450+40M | 7000+28M | X |
| cuckaroo | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| cuckarood | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 9.1 | X |
| cuckatoo | GRIN31 | - | 0.89 | 0.94 | 1.56 | 1.65 | X |
| cuckoo_ae | AE | 3.35 | 5.5 | 5.15 | 7.9 | 8.75 | X |
| cuckaroo_swap | SWAP | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| progpow_sero | SERO | 10.3M | 17.5M | 13.3M | 22.5M | 25.8M | 10M |
| sipc | SIPC | 600k | 940k | 780k | 1170k | 1050k | X |
| eaglesong | CKB | 430M | 640M | 740M | 1150M | 1160M | 350M |
| eaglesong_ethash | CKB+ETH | 203M+20.5M | 275M+34M | 415M+26.5M | 600M+44M | 790M+36M | 200M+22M |
| bfc | BFC | 80 | 130 | 120 | 190 | 210 | X |
| hns | HNS | 170M | 255M | 300M | 455M | 425M | 145M |
| hns_ethash | HNS+ETH | 76M+19M | 120M+30M | 158M+26.2M | 176M+44M | 305M+34M | 68M+22.5M |
| trb | TRB | 280M | 435M | 510M | 750M | 880M | X |
| trb_ethash | TRB+ETH | 122M+20.3M | 170M+34M | 240M+26.7M | 315M+45M | - | X |

Sample Usages

BTM
f2pool: nbminer -a tensority -o stratum+tcp://btm.f2pool.com:9221 -u bm1xxxxxxxxxx.worker
antpool: nbminer -a tensority -o stratum+tcp://stratum-btm.antpool.com:6666 -u username.worker
matpool.io: nbminer -a tensority -o stratum+tcp://btm.matpool.io:8118 -u bm1xxxxxxxxxxx.worker

ETH
ethermine: nbminer -a ethash -o ethproxy+tcp://asia1.ethermine.org -u 0x12343bdgf.worker
sparkpool: nbminer -a ethash -o ethproxy+tcp://cn.sparkpool.com:3333 -u 0x12343bdgf.worker
f2pool: nbminer -a ethash -o ethproxy+tcp://eth.f2pool.com:8008 -u 0x12343bdgf.worker
nanopool: nbminer -a ethash -o ethproxy+tcp://eth-asia1.nanopool.org:9999 -u 0x12343bdgf.worker
nicehash: nbminer -a ethash -o nicehash+tcp://daggerhashimoto.eu.nicehash.com:3353 -u btc_address.worker

BTM+ETH
f2pool: nbminer -a tensority_ethash -o stratum+tcp://btm.f2pool.com:9221 -u btm_address.btm_worker -do ethproxy+tcp://eth.f2pool.com:8008 -du eth_address.eth_worker

Grin29
sparkpool: nbminer -a cuckarood -o stratum+tcp://grin.sparkpool.com:6666 -u 123@qq.com/worker
f2pool: nbminer -a cuckarood -o stratum+tcp://grin29.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckarood -o nicehash+tcp://grincuckaroo29.eu.nicehash.com:3371 -u btc_address.worker

Grin31
sparkpool: nbminer -a cuckatoo -o stratum+tcp://grin.sparkpool.com:66667-u 123@qq.com/worker
f2pool: nbminer -a cuckatoo -o stratum+tcp://grin31.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckatoo -o nicehash+tcp://grincuckaroo31.eu.nicehash.com:3372 -u btc_address.worker

AE
f2pool: nbminer -a cuckoo_ae -o stratum+tcp://ae.f2pool.com:7898 -u ak_xxxxxxx.worker passwd
beepool: nbminer -a cuckoo_ae -o stratum+tcp://ae-pool.beepool.org:9505 -u ak_xxxx.worker passwd
uupool: nbminer -a cuckoo_ae -o stratum+tcp://ae.uupool.cn:6210 -u ak_xxxxxx.worker passwd
nicehash: nbminer -a cuckoo_ae -o nicehash+tcp://cuckoocycle.eu.nicehash.com:3376 -u btc_address.test
SWAP
luckypool: nbminer -a cuckaroo_swap -o stratum+tcp://swap2.luckypool.io:4466 -u wallet_address:worker
herominers: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u wallet_address.worker
herominers solo: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u solo:wallet_address.worker:arbitrary

SERO
beepool: nbminer -a progpow_sero -o stratum+tcp://sero-pool.beepool.org:9515 -u wallet_address.worker pswd
f2pool: nbminer -a progpow_sero -o stratum+tcp//sero.f2pool.com:4200 -u wallet_address.worker pswd

SIPC
simpool: nbminer -a sipc -o stratum+tcp://sipc.simpool.vip:8801 -u username.worker passwd
matpool: nbminer -a sipc -o stratum+tcp://sipc.matpool.io:11100 -u username.worker passwd

CKB
sparkpool: nbminer -a eaglesong -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd
beepool: nbminer -a eaglesong -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd
uupool: nbminer -a eaglesong -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd
f2pool: nbminer -a eaglesong -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd

CKB+ETH
sparkpool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd -do stratum+tcp://cn.sparkpool.com:3333 -du wallet.worker passwd
beepool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd -do stratum+tcp://eth-pool.beepool.org:9530 -du wallet.worker passwd
uupool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker passwd
f2pool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker passwd

BFC
uupool: nbminer -a bfc -o stratum+tcp://bfc.uupool.cn:12210 -u user.worker
bfcpool: nbminer -a bfc -o stratum+tcp://ss.bfcpool.com:3333 -u wallet.worker

HNS
f2pool: nbminer -a hns -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker

HNS+ETH
f2pool: nbminer -a hns_ethash -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker

TRB
uupool: nbminer -a trb -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker
hashpool: nbminer -a trb -o stratum+tcp://pplns.trb.stratum.hashpool.com:8208 -u wallet.worker

TRB+ETH
uupool: nbminer -a trb_ethash -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker

RVNt
minermore: nbminer -a kawpow -o stratum+tcp://rvnt.minermore.com:4505 -u wallet.worker passwd

CMD options
-h, --help Displays this help.
-v, --version Displays version information.
-c, --config <config file path> Use json format config file rather than cmd line options.
-a, --algo <algo> Select mining algorithm
BTM: tensority
ETH: ethash
BTM+ETH: tensority_ethash
Grin29: cuckaroo
Grin31: cuckatoo
SWAP: cuckaroo_swap
--api <host port> The endpoint for serving REST API.
-o, --url <url> Mining pool url.
BTM: stratum+tcp://btm.f2pool.com:9221
BTM with SSL: stratum+ssl://btm.f2pool.com:9443
ETH: ethproxy+tcp://eth.f2pool.com:8008
ETH with NiceHash: ethnh+tcp://daggerhashimoto.eu.nicehash.com:3353
-u, --user <user> User used in Mining pool, wallet address or username.
-o1, --url1 <url> url for backup mining pool 1.
-u1, --user1 <user> username for backup mining pool 1.
-o2, --url2 <url> url for backup mining pool 2.
-u2, --user2 <user> username for backup mining pool 2.
-di, --secondary-intensity <intensity> The relative intensity when dual mining.
-do, --secondary-url <url> ETH mining pool when dual mining.
-du, --secondary-user <user> ETH username when dual mining.
-do1, --secondary-url1 <url> Backup 1 ETH mining pool when dual mining.
-du1, --secondary-user1 <user> Backup 1 ETH username when dual mining.
-do2, --secondary-url2 <url> Backup 2 ETH mining pool when dual mining.
-du2, --secondary-user2 <user> Backup 2 ETH username when dual mining.
-d, --devices <devices> Specify GPU list to use. Format: "-d 0,1,2,3" to use first 4 GPU.
-i, --intensity <intensities> Comma-separated list of intensities (1 -100).
-strict-ssl Check validity of certificate when use SSL connection.
--cuckoo-intensity <intensity> Set intensity of cuckoo, cuckaroo, cuckatoo, [1, 12]. Set to 0 means autumatically adapt. Default: 0.
--cuckatoo-power-optimize Set this option to reduce the range of power consumed by rig when minining with algo cuckatoo. This feature can reduce the chance of power supply shutdown caused by overpowered. Warning: Setting this option may cause drop on minining performance.
--temperature-limit <temp-limit> Set temperature limit of GPU, if exceeds, stop GPU for 10 seconds and continue.
-log Generate log file named `log_<timestamp>.txt`.
--log-file <filename> Generate custom log file. Note: This option will override `--log`.
--no-nvml Do not query cuda device health status.
--fidelity-timeframe <timeframe> Set timeframe for the calculation of fidelity, unit in hour. Default: 24.
-long-format Use 'yyyy-MM-dd HH:mms,zzz' for log time format.
--device-info Print device cuda information.
--fee <fee> Change devfee in percentage, [0-5]. Set to '0' to turn off devfee with lower hashrate. Otherwise, devfee = max(set_value, def_value).
--generate-config <filename> Generate a sample config json file.
--no-watchdog Disable watchdog process.
--platform <platform> Choose platform,0: NVIDIA+AMD (default), 1: NVIDIA only, 2: AMD only


Change Log

v30.2(2020-05-05)

`windows`: Auto install driver if `--memory-tweak` is set and driver is not installed.
`windows`: Fix `driver install failed` issue on some windows rigs.
`kawpow`: Fix `duplicate share` issue on some pools.

v30.1(2020-05-03)
Reduce `ethash` `kawpow` startup time.
Fix a possible crash on certain rigs of reason `invalid kernel image`.
Do not apply memory tweak if `-mt` is set to 0 on corresponding gpu.
Print system information on start.

v30.0(2020-04-30)
Add option --memory-tweak , optimize memory timings of Nvidia GD5 & GD5X GPUs. Detail describe can be found in readme.md
Add option --verbose, print pool communucation log.
Add option --proxy, user can using socks5 proxy to set up connection with pool.
Add number of shares per GPU in both log print and api.
Minor bug fix and improvements.

29.1

- Fix low hashrate of kawpow on AMD RDNA GPU.
- Improve kawpow hashrate on AMD GPU.


v29.0(2020-04-03)
Add support for RVN new algo 'kawpow' mining on Nvidia & AMD gpus.


v28.1(2020-03-30)
Support HNS & HNS+ETH mining on NiceHash


v28.0(2020-03-28)
Add support for mining TRB & TRB+ETH on Nvidia GPU
Add support for mining ETH on `miningrigrentals`.
Minor improvements and fixes.


v27.7(2020-03-14)
Fix ETH mining on NiceHash.
Fix NVML initialization failure on certain cases.


v27.6(2020-03-14)
Improve HNS & HNS+ETH on Nvidia GPU.


v27.5(2020-03-05)
Fix high ETH reject rate on certain pools when mining HNS+ETH.
Slightly improve mining HNS+ETH on Nvidia GPU.


v27.4(2020-02-28)
Fix support the certain AMD Vega GPUs.
Fix a potential bug when mining under AMD+Nvidia mixed rig.


v27.3(2020-02-27)
Add HNS+ETH mining on AMD GPU
Improve HNS+ETH performance on Nvidia GPU
Note: `-di` calculation is changed in this version for HNS+ETH.
The value of `-di` = `work_size_of_hns` / `work_size_of_eth`
E.g, `-di 5` on a stock freq 1070ti will get 26M for eth & 130M for hns.


v27.2(2020-02-20)
Improve HNS performance on AMD GPU


v27.1(2020-02-19)
Improve HNS performance on Nvidia GPU
Add support for HNS mining for AMD GPU


v27.0(2020-02-18)
Add support for HNS & HNS_ETH mining for NVIDIA GPU
Minor bug fix and improvements.


v26.2(2019-11-21)

Improve CKB+ETH performance on AMD GPU.
Fix bug of 26.1: Launch crash on certain AMD rigs.


v26.1(2019-11-15)

Add support for mining CKB+ETH on AMD GPU.
Improve performance for mining CKB on Nvidia GPU.


v26.0(2019-10-11)

Add support for BFC mininig on Nvidia GPU.
Fix CKB compatibility on AMD GPU.
Fix cuckcoocycle on nicehash.


v25.5(2019-10-05)

Fix a bug when mining CKB+ETH.
Fix a compatibility issue in CKB stratum protocol.


v25.4(2019-10-04)

Improve CKB mining performance on both NVIDIA & AMD cards.
Improve CKB+ETH performance on NVIDIA cards.
Add support for mining SERO on AMD cards.
Add a new option `--platform` to allow users to choose GPU platform.


v25.2(2019-09-10)

Add support for `CKB` mining on AMD cards under linux.
Bug fix.


v25.1(2019-09-07)

Add support for `CKB` mining on AMD cards.

v25.0(2019-09-05)

Add support for `CKB` mining & `CKB`+`ETH` dual mining.
Enhance `-di` parameter to support comma separated list to specify `-di` value for each card.
The default value of `-di` for `CKB`+`ETH` mining ranges from 4 ~ 8 depending on GPU model, valid value range in [1, 10], higher value means higher intensity for `ETH`.
The best value of `-di` differs by GPU model, overclock and power limitation.

v24.4(2019-08-16)
Fix SIPC dxpool compatibility.
1080 & 1080ti users should use `OhGodAnETHlargementPill` to boost SIPC performance.

v24.3(2019-08-15)
Add support for mining SIPC.
Fix high CPU usage mining SERO with 24.1 & 24.2
Fix Grin intensity.

v24.2(2019-07-17)
Disable the auto-switch from cuckaroo -> cuckarood
Slightliy improve RTX2060 Grin29 performance under win10
Fix startup stuck issue on some linux distro.
Add new option `--generate-config` to generate a sample config file.
Note: Linux sero mining need to set a env before start if run with --no-watchdog, please check start_sero.sh

v24.1(2019-07-16)
Fix lower hashrate than previous version for Grin29 & AE on 10xx 6GB cards
Fix mining Grin29 AE on Turing 6GB Cards on Win10.
Fix the disfunction of auto-reboot when GPU error happens.
Fix start using json config file.
Change the GPU MEM size display upon launch from Total Size to Available Size.

v24.0(2019-07-15)
Support Grin29 fork on 17th, July.
When using algo `cuckaroo`, v24.0 will do an automatically switch to `cuckarood` on height 262080.
Add a temporary option `-grin29-fork-height`, user can test the auto-switch by setting this option to lower height value.
Improve performance on Grin29 & AE.
Add support for mining `SERO`, algo `progpow_sero`.
Add option `-intensity` to set the intensity level for each GPU.
Add option `-fidelity-timeframe` to customize the timeframe for fidelity calculation.
Add option `-log-file` to set a specified log filename.
Add option `-no-nvml` to close the periodical query for GPU status.
Add new method to turn on NiceHash protocol, `nicehash+tcp://`
Also compatible with previous url based method.
Minor improvement and bug fix.

v23.3(2019-06-14)
Fix mining AE (cuckoocycle) on NiceHash.
Add option to set a temperature limit on GPU.

v23.2(2019-05-09)
Improve Grin & AE & SWAP performance.
Add support for mining AE on NiceHash.
Add display output of Fidelity.
Minor improvement and bug fix.

v22.3(2019-04-15)
Improve performance of Grin31 on 1080ti & 2080ti.

v22.2(2019-04-15)
Improve compatiblity for mining Grin31 on windows 8GB cards.
Set default --cuckoo-intensity to 4, lower CPU usage on default settings when mining Grin & AE.

v22.1(2019-04-12)
Add support for mining Swap (XWP).
Improve Grin29 & AEperformance.
Improve Windows compatibility on Grin & AE, significant boost on performance.

v21.4(2019-04-03)
Improve Grin31 performance.
Improve performance of Grin29 & AE on RTX cards.
Fix Grin31 compatibility on Win7 with 8G cards.
New option to reduce the range of power consumption by multi-gpu rig.
Add miner Up Time print in cmd outputs.

v21.3(2019-03-20)
Fix bug: Occasionlly lower local hashrate than previously version.
Do not run GPU if mining pool not connected when mining Grin & AE.

v21.2(2019-03-15)
Fix bug: "GPU hung detected" happens under some normal conditions.

v21.1(2019-03-14)
Improve Grin29 performance
Add support for mining Grin & AE on Turing cards.
Add detection for GPU hung.
Increase chance of accept share when mining Grin on NiceHash.
Fix ETH mining on NiceHash.
Fix "accecpt share checking" bug when using backup mining pools.

v21.0(2019-03-06)
Add suuport for AE (Aeternity)
Improve performance on Grin29 & Grin31
Improve miner stability.

v20.0(2019-02-21)
Add support for Grin31
Add support for mining Grin on NiceHash
Add new option to tune CPU usage when mining Grin.
Improve BTM+ETH performance on RTX cards.
FIx bug of lower hashrate when mining BTM on rigs with mixed 10 series and 20 series cards.
Do not add a default worker name if no worker name specified by user.

v14.0(2019-01-30)
BTM mining, improve over 200% on RTX cards.
Improve Grin mining.

v13.2(2019-01-17)
Add support mining Grin on 1066-win10.
Fix support for Solo mining using grin-server.

v13.1(2019-01-15)
Add support for mining Grin coin (cuckaroo29).
Minor bug fix and improvement.

v12.4(2018-01-05)
Improve hashrate of BTM+ETH dual mining about 6%.

v12.3(2018-12-30)
Fix a bug that could cause many reject shares when epoch changes under ETH dual mining .

v12.2(2018-12-26)
Fix high stale share and reject share ratio when use big `-di` for dual mining BTM+ETH.
Fix the support of web monitor for dual mining.
Minor bug fixs and improvements.

v12.1(2018-12-24)
Fix support ETH PPS+ mode on F2pool
Add support for ETH on NiceHash (with protocol header `ethnh`)
Fix rest api when dual mining.
Minor bug fixs.

v12.0(2018-12-19)
**New `BTM+ETH` dual mining mode.**
Decrease the required driver version to 377.
Temporarily remove support for XMR mining.
Fix start using config file.
Add a default protocol header if not specified.

v11.0(2018-12-12)
Improve BTM hashrate.
Add support for ETH and XMR mining.
Optimize handle for new job, increase profit on mining pool.
Colorful output on console.
Add support for backup mining pools.
Decrease dev fee of BTM to 2%.

v10.0(2018-10-03)
Improve hashrate

v9.0(2018-08-28)
Improve hashrate ~30%
Improve stability

v8.0(2018-08-17)
Improve hashrate 10%
15%
Lower skipped share rate, increase actual hashrate on mining pool.
Added display for mining pool latency.
Added display for mining pool difficulty.
Improve API web monitor.

poslano v temi :: NBMiner v30.2, GPU Miner for ETH, RVN, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB
Pes :: 28.04.2020 ob 22:07
NoDevFee - for Claymore`s Dual Ethereum and Phoenix miner
=========================

Latest version is v15.0 - Supercharged Edition:

- now miner supports up to #384 epoch (4GB DAG size). Note that previous versions support up to #299 epoch, you will not be able to use old versions after #299 epoch.
- added support for Navi cards (ETH-only mode).
- now miner sets environment variables automatically (required for 4GB AMD cards).
- a few minor bug fixes and improvements.


DOWNLOAD LINK: MEGA -
https://mega.nz/#F!ASpS1IpY!kMMDJNq12mR0czqF9BtrpQ

Dev Fee's - 0.05%

version is v14.7 - Supercharged Edition:

- now the miner driver does not require switching Windows to Test Mode. If you want to turn Test Mode off, use "-driver uninstall" option (with admin rights) and reboot,
then start miner with admin rights to install new driver automatically when necessary (or use "-driver install" option directly).
If you have any problems with signed driver you can use "-driver install_test" option, it uses old approach: enables Test Mode (reboot is required) and installs unsigned driver.
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except Linux gpu-pro drivers and Radeon7 cards.
- updated Remote Manager to show total power consumption.
- fixed issue with "-logsmaxsize" option when "-logfile" option is used to specify directory for log files.
- a few minor bug fixes and improvements.

version is v14.6 - Supercharged Edition:

- now "-rxboost" option also supports old AMD cards (Hawaii, Tonga, Tahiti, Pitcairn), use "-rxboost 1" to improve hashrate up to 5% by applying some additional memory timings.
- now "-rxboost" option supports all AMD drivers.
- now "-strap" for AMD cards also supports AMD blockchain drivers.
- some changes to further reduce stale shares a bit.
- added "-minspeedtime" option.
- added statistics for shares accepting time (min/max/average), press "s" to see it.
- updated Remote Manager to show shares accepting time.
- a few minor bug fixes and improvements.

Version 14.0.0 Beta

features of the program
autostart with Windows
Commission for software developers (Claymore dual miner and Phoenix miner) returns to your wallet
Simplicity in setting (You do not need to own any special features in order to customize the mining)



cons of the program
supports only ETH
This is the first version of the program so there are possible bugs
Since we are still developing and we do not need much money from the commission, we take 25% of the miner's wallet. So, you get a commission at the rate of 0.25% when you are mining with Claymore Dual miner. And when mining with a Phoenix miner 0.16%.



in the future
monitor farm without white ip
Adding other Crypto-Currency
Adding other pools
Creating website
Improve stability and increase functionality



Suported pools
Ethermine.org
Nanopool.org
f2pool.com
dwarfpool.com
nicehash.com


Dev Fee's - 0.05%


FEATURES:


- Supports applying optimized memory timings (straps) on-the-fly in Windows, without flashing VBIOS (currently Polaris, Vega, Nvidia 10xx cards only), up to 20% speedup. Best straps for Ethereum are included.
- Supports new "dual mining" mode: mining both Ethereum and Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code, optimized assembler kernels.
- Supports both AMD and nVidia cards, even mixed.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum and Siacoin solo mining.
- Supports both HTTP and Stratum for Decred.
- Supports both HTTP and Stratum for Siacoin.
- Supports Stratum for Lbry, Pascal, Blake2s, Keccak.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.


This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal, POOL for Blake2s, POOL for Keccak.

For old AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility.
For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.
For AMD cards, set the following environment variables, especially if you have 2...4GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer.
For all 2GB cards and 3GB cards devfee is 0%, so on these cards you can mine all ETH forks without devfee, this miner is completely free in this case.
If some cards are 2...3GB and some >3GB, 2...3GB cards still mine for you during devfee time, only cards that have more than 3GB memory will be used for devfee mining. Miner displays appropriate messages during startup.
Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee.
So the developer fee is 0...1%, if you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1" though miner will show same hashrate.
Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.

This version is for recent AMD videocards only: 7xxx, 2xx and 3xx, 2GB or more. Recent nVidia videocards are supported as well.

CONFIGURATION FILE

You can use "config.txt" file instead of specifying options in command line.
If there are not any command line options, miner will check "config.txt" file for options.
If there is only one option in the command line, it must be configuration file name.
If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.
Place one option per line, if first character of a line is ";" or "#", this line will be ignored.
You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.

If for Ethereum-only mining:

ethpool:
NoDevFee.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

sparkpool:
NoDevFee.exe -epool eu.sparkpool.com:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

f2pool:
NoDevFee.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

nanopool:
NoDevFee.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

nicehash:
NoDevFee.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0

Ethereum forks mining:

NoDevFee.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1

FAILOVER

Use "epools.txt" and "dpools.txt" files to specify additional pools (you can use "-epoolsfile" and "-dpoolsfile" options to use different filenames).
These files have text format, one pool per line. Every pool has 3 connection attempts.
Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.
If the first character of a line is ";" or "#", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing.
If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.
You can reload "epools.txt" and "dpools.txt" files in runtime by pressing "r" key.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.
You can also use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.
You can also select current pool in runtime by pressing "e" or "d" key.


REMOTE MONITORING/MANAGEMENT

Miner supports remote monitoring/management via JSON protocol over raw TCP/IP sockets. You can also get recent console text lines via HTTP.
Start "EthMan.exe" from "Remote management" subfolder (Windows version only).
Check built-in help for more information. "API.txt" file contains more details about protocol.


KNOWN ISSUES

- AMD cards: on some cards you can notice non-constant mining speed in dual mode, sometimes speed becomes a bit slower. This issue was mostly fixed in recent versions, but not completely.
- AMD cards: in Linux with gpu-pro drivers, the list of GPUs may differ from the list of temperatures. You can use -di to change order of GPUs to match both lists.
- nVidia cards: dual mode is not so effective as for AMD cards.
- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions.
I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad.
Note that I can guarantee clean binaries only for official links in my posts on this forum (bitcointalk). If you downloaded miner from some other link - it really can be a virus.
However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.


TROUBLESHOOTING

1. Install Catalyst v15.12 for old AMD cards; for Fury, Polaris and Vega cards use latest blockchain drivers.
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB or more.
5. Reboot computer.
6. Check hardware, risers.
7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.

poslano v temi :: NoDev Fee - Claymore`s Dual Ethereum and Phoenix miner v15
Pes :: 26.04.2020 ob 17:50
SRBMiner-MULTI CPU & AMD GPU Miner 0.4.3
Windows & Linux


------------------------------------------------------------------------------------------------------

Download links: Here


===========================================
SUPPORTED ALGORITHMS:
===========================================

[CPU ONLY]

+ cpupower
+ defyx
+ m7mv2
+ randomarq
+ randomsfx
+ randomwow
+ randomx
+ randomxl
+ yescryptr16
+ yescryptr32
+ yescryptr8
+ yespower
+ yespower2b
+ yespoweric
+ yespoweriots
+ yespoweritc
+ yespowerlitb
+ yespowerltncg
+ yespowerr16
+ yespowersugar
+ yespowerurx

[CPU & GPU]

+ blake2b
+ blake2s
+ cryptonight_catalans
+ cryptonight_talleo
+ eaglesong
+ k12
+ kadena
+ keccak
+ mtp
+ rainforestv2
+ yescrypt

Note:
MTP scratchpad creation is very slow at the moment, it is waiting on a big rewrite. This has an impact on poolside hashrate if a lot of new works are sent out.


===========================================
SUPPORTED GPU'S:
===========================================

+ VEGA 56/64/FE/VII
+ RX 460/470/480/550/560/570/580/590
+ R9 285/285X/380/380X
+ R9 290/290X
+ R9 Fury/Nano

Linux : amdgpu-pro drivers


===========================================
FEES:
===========================================

0.00%
+ blake2b
+ yespowerurx

~0.85%
+ Rest


===========================================
FEATURES:
===========================================

+ Guided setup mode
+ Algorithm switching capability without external application
+ Run in background without a window
+ Hashrate watchdog that restarts miner on GPU error
+ Monitoring of GPU temperature, and auto turn off if temperature is too high
+ System shutdown on too high GPU temperature
+ Miner auto restart on too many rejected shares
+ Startup monitor which ensures your miner starts working normally
+ API for miner statistics
+ Web based GUI interface for miner statistics
+ Multiple pools with failover support
+ Add new pools on the fly without restarting miner
+ Difficulty monitor, reconnects to pool if difficulty is too high
+ Job timeout monitor, reconnects to pool if no job received for a long time
+ Switch AMD video cards to compute mode easily


===========================================
USAGE EXAMPLES
===========================================

1. Disable CPU mining, use only GPU mining

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-cpu

2. Run miner in background without console window, with API enabled on port 17644 (http://127.0.0.1:17644)

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --background --api-enable --api-port 17644

3. Disable GPU mining, use 7 CPU threads with extended logging enabled and saved to Logslog.txt file

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 7 --log-file Logslog.txt --extended-log

4. Full example for CPU & GPU mining set only from cmd (4 GPU/s used and 7 CPU threads on K12 algorithm)

Code:
SRBMiner-MULTI.exe --algorithm k12 --gpu-id 0,1,2,3 --gpu-intensity 26,25,26,26 --gpu-worksize 256,256,256,256 --gpu-threads 1,1,1,1 --cpu-threads 7 --pool your-pool-here --wallet your-wallet-here

5. Disable GPU mining, use 15 CPU threads with extended logging enabled and saved to Logslog.txt file, start mining Randomx from block height 1978433 and run miner in background

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 15 --log-file Logslog.txt --extended-log --background --start-block-height 1978433


===========================================
CPU MINING SETUP
===========================================

If you don't set the --cpu-threads or --cpu-affinity parameters, miner will try to automatically find the best setup for you system.
Sometimes the auto setup won't find the optimal settings so you should find it by experimenting.

You need to set the number of worker threads (--cpu-threads) and bind them to the appropriate PU (processing unit) with --cpu-affinity.


Examples to get you started:

4 CORE / 8 THREADS CPU :

1. Use 4 threads, 1 on every core : --cpu-threads 4 --cpu-affinity 0x55
2. Use 8 threads, 2 on every core : --cpu-threads 8 --cpu-affinity 0xFF

6 CORE / 12 THREADS CPU :

1. Use 6 threads, 1 on every core : --cpu-threads 6 --cpu-affinity 0x555
2. Use 12 threads, 2 on every core : --cpu-threads 12 --cpu-affinity 0xFFF


===========================================
RANDOMX EXTRA TWEAKS
===========================================

To enjoy the benefits of the increased hashrate:

1. Miner must run with administrator privileges [right click on SRBMiner-MULTI.exe->properties->compatibility-> check 'Run this program as an administrator' option-> click OK button
2. Make sure WinRing0x64.sys is in the same folder as SRBMiner-MULTI.exe

Enabling the extra tweaks, some register values are changed which will revert back to the original value after a computer restart.

If miner starts crashing, or creates bad results after enabling the extra tweaks, you can try the '--randomx-use-tweaks' parameter, where you can define which tweak/s you want to enable.
Without this option miner enables all available tweaks (same as --randomx-use-tweaks 0123 for AMD, --randomx-use-tweaks 0 for Intel) , but with '--randomx-use-tweaks' you can define which ones you want to use.

There are at the moment :
Intel - 1 tweak
Amd - 5 tweaks


Index starts from 0, so you have 0 1 2 3 4 for options on AMD.

Here's an example :

+ Use tweaks number 0 and 3 (dont use 1 and 2)

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03

The order of tweaks doesn't matter, so writing 03 is same as 30.

What you should do is to find which tweak, or combination of tweaks, makes the problems.
You should try enabling tweaks one by one, and test to see if miner runs stable with one tweak, and if it does, test the next one etc.
Luckily there are not so many combinations for you try (because 0123 is for example same as 3021 or 1302.. )

So start with :
Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0

If it runs without crashing for some time, try the next one :

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1

and so on, until you find the one that makes the trouble.

Then try combining tweaks to find a combination that works for you.

If you have older gen. Ryzens, try this combination of tweaks :

Code:
--randomx-use-tweaks 0134


===========================================
INFORMATIONS
===========================================

SRBMiner-Multi is supported by Awesome Miner

If you get "Insufficient system resources available to allocate X kB in large-page memory" message, that means you dont have enough FREE memory left, a computer restart should solve this.
Large-page memory regions may be difficult to obtain after the system has been running for a long time because the physical space for each large page must be contiguous, but the memory may have become fragmented.
If you still get this message even after restarting, try increasing virtual memory.


You can find all the parameters and everything you need to get going in the readme.txt file.

This thread is self moderated, because in the previous SRBMiner thread there was too much spam and garbage, which wasn't removed by the forum moderators.

Update infos :

V0.4.3

+ Added 'tellor' algorithm (trb.uupool.cn compatible stratum)
+ Improvements on 'minotaur' algorithm
+ Guided setup fixed & simplified

- Added 'tellor' (TRB) algorithm for uupool.cn compatible stratum pools. I tried to contact hashpool.com so i could make their pool compatible too, but could not find any ways to do it (no discord, not answering on email).

- Previous version introduced 'disable_cpu' and 'disable_gpu' parameters for use in configuration files.
Because of that, mixing of cmd parameters '--disable-cpu', '--disable-gpu' and configuration files isn't working as before.
Now you should use only one method : either cmd parameters completely, or configuration files, don't mix them.

V0.4.2


+ Improvements for 4G Ellesmere cards on 'cryptonight_bbc' algorithm
+ Small improvements on 'yespower' CPU algorithms
+ Added parameters 'disable_cpu' and 'disable_gpu' in configuration file
+ Fixed 'handshake' algorithm mining on nicehash
+ Algoswitching now reconnects back to main pool when it gets available
+ Minor bug fixes

V0.4.1
+ Added CPU algorithm 'minotaur' (Ring coin)
+ Added CPU algorithm 'yespowerres' (Resistance coin)
+ 2-4% faster 'cryptonight_bbc' on some GPU's
+ Minor bug fixes

V0.4.0
+ Added algorithm 'randomkeva' (Keva coin upcoming algorithm)
+ Added Navi support for 'cryptonight_bbc' algorithm
+ Much better auto setup for RX 4xx/5xx 8G cards on 'cryptonight_bbc' algorithm

V0.3.9
+ Miner now works on older linux distributions ( Ubuntu 16.04 - glibc2.23 )
+ Small hashrate increase on 'cryptonight_bbc' algorithm for some GPU's
+ Yescrypt algorithms hashrate increase on CPU if miner run with administrator/root privilege
+ Fixed GPU sensors reading on Linux
+ Fixed a bug that sometimes stopped hashing when connected to the pool after a long reconnect period
+ Renamed '--disable-randomx-tweaks' parameter to '--disable-msr-tweaks', '--disable-tweaking' to '--disable-gpu-tweaking', and '--randomx-use-tweaks' to '--msr-use-tweaks'
+ Minor bug fixes

V0.3.8
+ Hashrate increased even more on 'kadena' algorithm, and at the same time lowered power usage
+ Small hashrate increase on 'yescrypt' CPU algorithms
+ Minor bug fixes

V0.3.7
+ 'kadena' algorithm huge hashrate increase
+ Added 'gpu_' prefix to GPU related parameters in config file : gpu_intensity, gpu_raw_intensity, gpu_worksize, gpu_threads, gpu_tweak_profile, gpu_target_temperature, gpu_shutdown_temperature, gpu_off_temperature. 'gpu_conf' parameters naming stays the same.
+ Added new parameters in config file : cpu_threads, cpu_affinity, cpu_priority
+ Renamed 'pool_use_tls' in pool configuration file to 'tls'


V0.3.6
+ 'cryptonight_bbc' algorithm updated (active from block 133060)
+ Added '--enable-opencl-cleanup' parameter to enable OpenCL resources freeing on miner exit/restart (default is disabled because it can hang miner if driver crashed)

V0.3.5
+ Added 'cryptonight_bbc' algorithm (BigBangCore) - DevFee 2.5%
+ Lowered devfee for 'bl2bsha3' to 2%
+ Some gpu's might get a tiny hashrate increase on 'bl2bsha3'
+ Gpu sensors now available in Linux
+ --adl-disable parameter now available in Linux
+ --shutdown-temperature parameter (shutdown_temperature in config) now available in Linux
+ --gpu-off-temperature parameter (off_temperature in config) now available in Linux
+ Removed option to set difficulty for 'bl2bsha3' in password field
+ Removed notification for 6block stratum compatibility
+ Possibly fixed a bug where miner shows it's hashing (always shows exactly same hashrate), but gpu's are stalled

V0.3.4
+ Fixed share accepted/rejected display issue with 6block pool (HNS)
+ Fixed miner auto restarting issue on Linux
+ Tiny hashrate increase on 'bl2bsha3' with some GPU's

V0.3.3
+ Hashrate increase on 'bl2bsha3' algorithm (~ 10-15% )
+ Added support for Navi (gfx1010) cards for 'bl2bsha3' (let's just say it works)
+ Added possibility to set difficulty for 'bl2bsha3' . Just enter it in the pool password field.
+ Miner can be now used on pools other than 6block if they implement the same stratum protocol as 6block

V0.3.2
+ Added algorithm 'bl2bsha3' (Handshake (HNS) coin - 6block.com pool only)
+ RandomX fixes
+ Added '--gpu-platform' parameter to cmd config, and 'gpu_platform' to configuration files to force opencl platform
+ Added '--randomx-use-1gb-pages' parameter to config, whiche enables 1GB sized page files if supported by CPU
+ When reading pools or algorithms configuration file, if invalid entry found it will be just skipped

V0.3.1
+ Fixed ERROR 0x4002

V0.3.0
+ First version for Linux (Tested on Ubuntu 18.04)
+ Removed RandomV (MoneroV) algorithm
+ Added 'defyx' algorithm (Scala)
+ Added 'yespoweritc' algorithm (Intercoin)
+ Added 'cryptonight_catalans' algorithm (CatalansCoin)
+ Added 'cryptonight_talleo' algorithm (Talleo)
+ --randomx-use-tweaks accepts now values from 0-4, [ 0 - Intel, 0,1,2,3,4 - AMD ]
+ Added parameter 'worker' to pools config and cmd parameters -> defines worker name for RPC2
+ a lot of bug fixes

V0.2.0
+ Added RandomV algorithm (MoneroV)
+ Added --randomx-use-tweaks , to select the MSR tweak/s to apply
+ Added RandomX tweak support for Intel Core2 processors

V0.1.9 beta
+ Added RandomSFX algorithm (SafexCash)
+ RandomX algorithm/s improvements
+ Added RandomX algorithm/s extra tweak that can increase hashrate
+ Added parameter --disable-randomx-tweaks
+ Fixed K12 algorithm
+ --cpu-priority now affects main process too (not just worker threads)
+ default --cpu-priority is now 2 (below normal)
+ bug fixes
+ added license text to readme for RandomX and WinRing0

V0.1.8 beta
+ Added Kadena algorithm (pool mining only)
+ Added yespoweric algorithm (IsotopeC)
+ Added yespoweriots algorithm (IOTScoin)
+ Added yespower2b AVX support
+ Fixed nicehash protocol compatibility with rpc2
+ Miner now won't quit if not enough free RAM for an algorithm, it will just warn the user

V0.1.7 beta
+ Added 'm7mv2' algorithm (Magi coin - XMG)
+ Cpu auto configuration should be better than on previous versions
+ Added CPU data to API, also rearranged a few things in API
+ Console window 'Quick Edit' mode disabled on miner start, so users won't accidentally pause miner by clicking in the console window

V0.1.6 beta

+ Fixed threads binding on systems with more than 1 numa node
+ Better auto configuration for cpu mining
+ Previous two fixes should bring higher hashrates
+ Added pool controlled algorithm switching capability (Monero Ocean)
+ Added pool config parameter "algo_min_time" and --algo-min-time to cli (Monero Ocean)
+ Added pool config parameter "keepalive" and --keepalive to cli

V0.1.5 beta
+ Added cpu algorithms : RandomX, RandomXL, RandomWow, RandomArq
+ Added cli parameters: --cpu-priority, --disable-huge-pages, --disable-hw-aes, --disable-numa
+ Added pool config parameter 'start_block_height' and --start-block-height cli parameter
+ Fixed a bug that limited the number of threads useable for cpu mining
+ Fixed cpu affinity parameter and thread/s binding to affinity mask
+ Where possible, now using huge pages if available, this should bring a slight performance increase
+ Removed OpenCL dependency if using only cpu miner
+ Added limited Overdrive8 support (adl type 3)

V0.1.4 beta
+ Fixed a critical bug with work creation for fast algorithms [k12, keccak]

V0.1.3 beta
+ Keccak algorithm +15% faster on gpu
+ K12 algorithm +8-12% faster on gpu [vega56 ~1700mhs]
+ Guided setup got smarter a little bit

V0.1.2 beta
+ Added support for kangaroo12 algo [k12]
+ All algorithms that have a fee now have the same ~0.85% devfee
+ More bug fixes

V0.1.1 beta
+Added yespowerltncg, yespowersugar, yespowerurx, yespower2b, eaglesong (nervos-ckb) algorithms
+Added support for SHA with yespower algorithm family

poslano v temi :: SRBMiner-MULTI AMD & CPU Miner 0.4.3 Win & Linux
Pes :: 24.04.2020 ob 19:42


NBMiner


GPU Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB.


Download


Download From Mega Release: NBMiner v29.1


Performance (stock frequency)
Code: http://api_hostort/ in your browser to use web monitor.
Default: http://127.0.0.1:22333

Features

Support Windows & Linux.
Support backup mining pool configuration.
Support SSL connection to mining pools.

Dev Fee

tensority_ethash 3%, tensority(Pascal) 2%, tensority(Turing) 3%, ethash 0.65%, cuckaroo & cuckatoo & cuckaroo_swap 2%, progpow_sero 2%, sipc 2%, bfc 3%
hns 2%, hns_ethash 3%, trb 2%, trb_ethash 3%, kawpow 2%


Performance (stock frequency)

Code:
| Algorithm | Coin | P106-100 | P104-8G | 1070ti | 1080ti | 2080 | RX580 2048sp |
| :--------------- | :-----: | :--------: | :--------: | :--------: | :------: | :------: | :----------: |
| tensority | BTM | 1,900 | 3000 | 3,400 | 5,000 | 11,500 | X |
| ethash | ETH | 21.2M | 34.5M | 26.9M | 46M | 35.5M | X |
| tensority_ethash | BTM+ETH | 950+15.5M | 1600+26.5M | 1350+22M | 2450+40M | 7000+28M | X |
| cuckaroo | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| cuckarood | GRIN29 | 3.45 | 5.6 | 5.25 | 8.1 | 9.1 | X |
| cuckatoo | GRIN31 | - | 0.89 | 0.94 | 1.56 | 1.65 | X |
| cuckoo_ae | AE | 3.35 | 5.5 | 5.15 | 7.9 | 8.75 | X |
| cuckaroo_swap | SWAP | 3.45 | 5.6 | 5.25 | 8.1 | 8.9 | X |
| progpow_sero | SERO | 10.3M | 17.5M | 13.3M | 22.5M | 25.8M | 10M |
| sipc | SIPC | 600k | 940k | 780k | 1170k | 1050k | X |
| eaglesong | CKB | 430M | 640M | 740M | 1150M | 1160M | 350M |
| eaglesong_ethash | CKB+ETH | 203M+20.5M | 275M+34M | 415M+26.5M | 600M+44M | 790M+36M | 200M+22M |
| bfc | BFC | 80 | 130 | 120 | 190 | 210 | X |
| hns | HNS | 170M | 255M | 300M | 455M | 425M | 145M |
| hns_ethash | HNS+ETH | 76M+19M | 120M+30M | 158M+26.2M | 176M+44M | 305M+34M | 68M+22.5M |
| trb | TRB | 280M | 435M | 510M | 750M | 880M | X |
| trb_ethash | TRB+ETH | 122M+20.3M | 170M+34M | 240M+26.7M | 315M+45M | - | X |

Sample Usages

BTM

f2pool: nbminer -a tensority -o stratum+tcp://btm.f2pool.com:9221 -u bm1xxxxxxxxxx.worker
antpool: nbminer -a tensority -o stratum+tcp://stratum-btm.antpool.com:6666 -u username.worker
matpool.io: nbminer -a tensority -o stratum+tcp://btm.matpool.io:8118 -u bm1xxxxxxxxxxx.worker

ETH

ethermine: nbminer -a ethash -o ethproxy+tcp://asia1.ethermine.org -u 0x12343bdgf.worker
sparkpool: nbminer -a ethash -o ethproxy+tcp://cn.sparkpool.com:3333 -u 0x12343bdgf.worker
f2pool: nbminer -a ethash -o ethproxy+tcp://eth.f2pool.com:8008 -u 0x12343bdgf.worker
nanopool: nbminer -a ethash -o ethproxy+tcp://eth-asia1.nanopool.org:9999 -u 0x12343bdgf.worker
nicehash: nbminer -a ethash -o nicehash+tcp://daggerhashimoto.eu.nicehash.com:3353 -u btc_address.worker

BTM+ETH

f2pool: nbminer -a tensority_ethash -o stratum+tcp://btm.f2pool.com:9221 -u btm_address.btm_worker -do ethproxy+tcp://eth.f2pool.com:8008 -du eth_address.eth_worker

Grin29

sparkpool: nbminer -a cuckarood -o stratum+tcp://grin.sparkpool.com:6666 -u 123@qq.com/worker
f2pool: nbminer -a cuckarood -o stratum+tcp://grin29.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckarood -o nicehash+tcp://grincuckaroo29.eu.nicehash.com:3371 -u btc_address.worker

Grin31

sparkpool: nbminer -a cuckatoo -o stratum+tcp://grin.sparkpool.com:66667-u 123@qq.com/worker
f2pool: nbminer -a cuckatoo -o stratum+tcp://grin31.f2pool.com:13654 -u username.worker passwd
nicehash: nbminer -a cuckatoo -o nicehash+tcp://grincuckaroo31.eu.nicehash.com:3372 -u btc_address.worker

AE

f2pool: nbminer -a cuckoo_ae -o stratum+tcp://ae.f2pool.com:7898 -u ak_xxxxxxx.worker passwd
beepool: nbminer -a cuckoo_ae -o stratum+tcp://ae-pool.beepool.org:9505 -u ak_xxxx.worker passwd
uupool: nbminer -a cuckoo_ae -o stratum+tcp://ae.uupool.cn:6210 -u ak_xxxxxx.worker passwd
nicehash: nbminer -a cuckoo_ae -o nicehash+tcp://cuckoocycle.eu.nicehash.com:3376 -u btc_address.test
SWAP

luckypool: nbminer -a cuckaroo_swap -o stratum+tcp://swap2.luckypool.io:4466 -u wallet_address:worker
herominers: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u wallet_address.worker
herominers solo: nbminer -a cuckaroo_swap -o stratum+tcp://swap.herominers.com:10441 -u solo:wallet_address.worker:arbitrary

SERO

beepool: nbminer -a progpow_sero -o stratum+tcp://sero-pool.beepool.org:9515 -u wallet_address.worker pswd
f2pool: nbminer -a progpow_sero -o stratum+tcp//sero.f2pool.com:4200 -u wallet_address.worker pswd

SIPC

simpool: nbminer -a sipc -o stratum+tcp://sipc.simpool.vip:8801 -u username.worker passwd
matpool: nbminer -a sipc -o stratum+tcp://sipc.matpool.io:11100 -u username.worker passwd

CKB

sparkpool: nbminer -a eaglesong -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd
beepool: nbminer -a eaglesong -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd
uupool: nbminer -a eaglesong -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd
f2pool: nbminer -a eaglesong -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd

CKB+ETH

sparkpool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.sparkpool.com:8888 -u user.worker passwd -do stratum+tcp://cn.sparkpool.com:3333 -du wallet.worker passwd
beepool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb-pool.beepool.org:9550 -u email/worker passwd -do stratum+tcp://eth-pool.beepool.org:9530 -du wallet.worker passwd
uupool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.uupool.cn:10861 -u user.worker passwd -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker passwd
f2pool: nbminer -a eaglesong_ethash -o stratum+tcp://ckb.f2pool.com:4300 -u wallet.worker passwd -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker passwd

BFC

uupool: nbminer -a bfc -o stratum+tcp://bfc.uupool.cn:12210 -u user.worker
bfcpool: nbminer -a bfc -o stratum+tcp://ss.bfcpool.com:3333 -u wallet.worker

HNS

f2pool: nbminer -a hns -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker

HNS+ETH

f2pool: nbminer -a hns_ethash -o stratum+tcp://hns.f2pool.com:6000 -u wallet.worker -do stratum+tcp://eth.f2pool.com:8008 -du wallet.worker

TRB

uupool: nbminer -a trb -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker
hashpool: nbminer -a trb -o stratum+tcp://pplns.trb.stratum.hashpool.com:8208 -u wallet.worker

TRB+ETH

uupool: nbminer -a trb_ethash -o stratum+tcp://trb.uupool.cn:11002 -u wallet.worker -do stratum+tcp://eth.uupool.cn:8008 -du wallet.worker

RVNt

minermore: nbminer -a kawpow -o stratum+tcp://rvnt.minermore.com:4505 -u wallet.worker passwd

CMD options

-h, --help Displays this help.
-v, --version Displays version information.
-c, --config <config file path> Use json format config file rather than cmd line options.
-a, --algo <algo> Select mining algorithm
BTM: tensority
ETH: ethash
BTM+ETH: tensority_ethash
Grin29: cuckaroo
Grin31: cuckatoo
SWAP: cuckaroo_swap
--api <host port> The endpoint for serving REST API.
-o, --url <url> Mining pool url.
BTM: stratum+tcp://btm.f2pool.com:9221
BTM with SSL: stratum+ssl://btm.f2pool.com:9443
ETH: ethproxy+tcp://eth.f2pool.com:8008
ETH with NiceHash: ethnh+tcp://daggerhashimoto.eu.nicehash.com:3353
-u, --user <user> User used in Mining pool, wallet address or username.
-o1, --url1 <url> url for backup mining pool 1.
-u1, --user1 <user> username for backup mining pool 1.
-o2, --url2 <url> url for backup mining pool 2.
-u2, --user2 <user> username for backup mining pool 2.
-di, --secondary-intensity <intensity> The relative intensity when dual mining.
-do, --secondary-url <url> ETH mining pool when dual mining.
-du, --secondary-user <user> ETH username when dual mining.
-do1, --secondary-url1 <url> Backup 1 ETH mining pool when dual mining.
-du1, --secondary-user1 <user> Backup 1 ETH username when dual mining.
-do2, --secondary-url2 <url> Backup 2 ETH mining pool when dual mining.
-du2, --secondary-user2 <user> Backup 2 ETH username when dual mining.
-d, --devices <devices> Specify GPU list to use. Format: "-d 0,1,2,3" to use first 4 GPU.
-i, --intensity <intensities> Comma-separated list of intensities (1 -100).
-strict-ssl Check validity of certificate when use SSL connection.
--cuckoo-intensity <intensity> Set intensity of cuckoo, cuckaroo, cuckatoo, [1, 12]. Set to 0 means autumatically adapt. Default: 0.
--cuckatoo-power-optimize Set this option to reduce the range of power consumed by rig when minining with algo cuckatoo. This feature can reduce the chance of power supply shutdown caused by overpowered. Warning: Setting this option may cause drop on minining performance.
--temperature-limit <temp-limit> Set temperature limit of GPU, if exceeds, stop GPU for 10 seconds and continue.
-log Generate log file named `log_<timestamp>.txt`.
--log-file <filename> Generate custom log file. Note: This option will override `--log`.
--no-nvml Do not query cuda device health status.
--fidelity-timeframe <timeframe> Set timeframe for the calculation of fidelity, unit in hour. Default: 24.
-long-format Use 'yyyy-MM-dd HH:mms,zzz' for log time format.
--device-info Print device cuda information.
--fee <fee> Change devfee in percentage, [0-5]. Set to '0' to turn off devfee with lower hashrate. Otherwise, devfee = max(set_value, def_value).
--generate-config <filename> Generate a sample config json file.
--no-watchdog Disable watchdog process.
--platform <platform> Choose platform,0: NVIDIA+AMD (default), 1: NVIDIA only, 2: AMD only


Change Log

new version 29.1

- Fix low hashrate of kawpow on AMD RDNA GPU.
- Improve kawpow hashrate on AMD GPU.


v29.0(2020-04-03)
Add support for RVN new algo 'kawpow' mining on Nvidia & AMD gpus.


v28.1(2020-03-30)
Support HNS & HNS+ETH mining on NiceHash


v28.0(2020-03-28)
Add support for mining TRB & TRB+ETH on Nvidia GPU
Add support for mining ETH on `miningrigrentals`.
Minor improvements and fixes.


v27.7(2020-03-14)
Fix ETH mining on NiceHash.
Fix NVML initialization failure on certain cases.


v27.6(2020-03-14)
Improve HNS & HNS+ETH on Nvidia GPU.


v27.5(2020-03-05)
Fix high ETH reject rate on certain pools when mining HNS+ETH.
Slightly improve mining HNS+ETH on Nvidia GPU.


v27.4(2020-02-28)
Fix support the certain AMD Vega GPUs.
Fix a potential bug when mining under AMD+Nvidia mixed rig.


v27.3(2020-02-27)
Add HNS+ETH mining on AMD GPU
Improve HNS+ETH performance on Nvidia GPU
Note: `-di` calculation is changed in this version for HNS+ETH.
The value of `-di` = `work_size_of_hns` / `work_size_of_eth`
E.g, `-di 5` on a stock freq 1070ti will get 26M for eth & 130M for hns.


v27.2(2020-02-20)
Improve HNS performance on AMD GPU


v27.1(2020-02-19)
Improve HNS performance on Nvidia GPU
Add support for HNS mining for AMD GPU


v27.0(2020-02-18)
Add support for HNS & HNS_ETH mining for NVIDIA GPU
Minor bug fix and improvements.


v26.2(2019-11-21)

Improve CKB+ETH performance on AMD GPU.
Fix bug of 26.1: Launch crash on certain AMD rigs.


v26.1(2019-11-15)

Add support for mining CKB+ETH on AMD GPU.
Improve performance for mining CKB on Nvidia GPU.


v26.0(2019-10-11)

Add support for BFC mininig on Nvidia GPU.
Fix CKB compatibility on AMD GPU.
Fix cuckcoocycle on nicehash.


v25.5(2019-10-05)

Fix a bug when mining CKB+ETH.
Fix a compatibility issue in CKB stratum protocol.


v25.4(2019-10-04)

Improve CKB mining performance on both NVIDIA & AMD cards.
Improve CKB+ETH performance on NVIDIA cards.
Add support for mining SERO on AMD cards.
Add a new option `--platform` to allow users to choose GPU platform.


v25.2(2019-09-10)

Add support for `CKB` mining on AMD cards under linux.
Bug fix.


v25.1(2019-09-07)

Add support for `CKB` mining on AMD cards.

v25.0(2019-09-05)


Add support for `CKB` mining & `CKB`+`ETH` dual mining.
Enhance `-di` parameter to support comma separated list to specify `-di` value for each card.
The default value of `-di` for `CKB`+`ETH` mining ranges from 4 ~ 8 depending on GPU model, valid value range in [1, 10], higher value means higher intensity for `ETH`.
The best value of `-di` differs by GPU model, overclock and power limitation.

poslano v temi :: NBMiner v29.1, Miner for RVN, ETH, GRIN, AE, BTM, SERO, HNS, BFC, SIPC, TRB etc.
Pes :: 22.04.2020 ob 22:24
SRBMiner-MULTI CPU & AMD GPU Miner 0.4.1
Windows & Linux

------------------------------------------------------------------------------------------------------

Download links:
https://mega.nz/#F!tGoFHRbS!xJaRZ_54xiAYiZmBihxPWg


===========================================
SUPPORTED ALGORITHMS:
===========================================

[CPU ONLY]


+ cpupower
+ defyx
+ m7mv2
+ randomarq
+ randomsfx
+ randomwow
+ randomx
+ randomxl
+ yescryptr16
+ yescryptr32
+ yescryptr8
+ yespower
+ yespower2b
+ yespoweric
+ yespoweriots
+ yespoweritc
+ yespowerlitb
+ yespowerltncg
+ yespowerr16
+ yespowersugar
+ yespowerurx

[CPU & GPU]

+ blake2b
+ blake2s
+ cryptonight_catalans
+ cryptonight_talleo
+ eaglesong
+ k12
+ kadena
+ keccak
+ mtp
+ rainforestv2
+ yescrypt

Note:
MTP scratchpad creation is very slow at the moment, it is waiting on a big rewrite. This has an impact on poolside hashrate if a lot of new works are sent out.


===========================================
SUPPORTED GPU'S:
===========================================

+ VEGA 56/64/FE/VII
+ RX 460/470/480/550/560/570/580/590
+ R9 285/285X/380/380X
+ R9 290/290X
+ R9 Fury/Nano

Linux : amdgpu-pro drivers


===========================================
FEES:
===========================================

0.00%
+ blake2b
+ yespowerurx

~0.85%
+ Rest


===========================================
FEATURES:
===========================================

+ Guided setup mode
+ Algorithm switching capability without external application
+ Run in background without a window
+ Hashrate watchdog that restarts miner on GPU error
+ Monitoring of GPU temperature, and auto turn off if temperature is too high
+ System shutdown on too high GPU temperature
+ Miner auto restart on too many rejected shares
+ Startup monitor which ensures your miner starts working normally
+ API for miner statistics
+ Web based GUI interface for miner statistics
+ Multiple pools with failover support
+ Add new pools on the fly without restarting miner
+ Difficulty monitor, reconnects to pool if difficulty is too high
+ Job timeout monitor, reconnects to pool if no job received for a long time
+ Switch AMD video cards to compute mode easily


===========================================
USAGE EXAMPLES
===========================================

1. Disable CPU mining, use only GPU mining

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-cpu

2. Run miner in background without console window, with API enabled on port 17644 (http://127.0.0.1:17644)

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --background --api-enable --api-port 17644

3. Disable GPU mining, use 7 CPU threads with extended logging enabled and saved to Logslog.txt file

Code:
SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 7 --log-file Logslog.txt --extended-log

4. Full example for CPU & GPU mining set only from cmd (4 GPU/s used and 7 CPU threads on K12 algorithm)

Code:
SRBMiner-MULTI.exe --algorithm k12 --gpu-id 0,1,2,3 --gpu-intensity 26,25,26,26 --gpu-worksize 256,256,256,256 --gpu-threads 1,1,1,1 --cpu-threads 7 --pool your-pool-here --wallet your-wallet-here

5. Disable GPU mining, use 15 CPU threads with extended logging enabled and saved to Logslog.txt file, start mining Randomx from block height 1978433 and run miner in background

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 15 --log-file Logslog.txt --extended-log --background --start-block-height 1978433


===========================================
CPU MINING SETUP
===========================================

If you don't set the --cpu-threads or --cpu-affinity parameters, miner will try to automatically find the best setup for you system.
Sometimes the auto setup won't find the optimal settings so you should find it by experimenting.

You need to set the number of worker threads (--cpu-threads) and bind them to the appropriate PU (processing unit) with --cpu-affinity.


Examples to get you started:

4 CORE / 8 THREADS CPU :

1. Use 4 threads, 1 on every core : --cpu-threads 4 --cpu-affinity 0x55
2. Use 8 threads, 2 on every core : --cpu-threads 8 --cpu-affinity 0xFF

6 CORE / 12 THREADS CPU :

1. Use 6 threads, 1 on every core : --cpu-threads 6 --cpu-affinity 0x555
2. Use 12 threads, 2 on every core : --cpu-threads 12 --cpu-affinity 0xFFF


===========================================
RANDOMX EXTRA TWEAKS
===========================================

To enjoy the benefits of the increased hashrate:

1. Miner must run with administrator privileges [right click on SRBMiner-MULTI.exe->properties->compatibility-> check 'Run this program as an administrator' option-> click OK button
2. Make sure WinRing0x64.sys is in the same folder as SRBMiner-MULTI.exe

Enabling the extra tweaks, some register values are changed which will revert back to the original value after a computer restart.

If miner starts crashing, or creates bad results after enabling the extra tweaks, you can try the '--randomx-use-tweaks' parameter, where you can define which tweak/s you want to enable.
Without this option miner enables all available tweaks (same as --randomx-use-tweaks 0123 for AMD, --randomx-use-tweaks 0 for Intel) , but with '--randomx-use-tweaks' you can define which ones you want to use.

There are at the moment :
Intel - 1 tweak
Amd - 5 tweaks

Index starts from 0, so you have 0 1 2 3 4 for options on AMD.

Here's an example :

+ Use tweaks number 0 and 3 (dont use 1 and 2)

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03

The order of tweaks doesn't matter, so writing 03 is same as 30.

What you should do is to find which tweak, or combination of tweaks, makes the problems.
You should try enabling tweaks one by one, and test to see if miner runs stable with one tweak, and if it does, test the next one etc.
Luckily there are not so many combinations for you try (because 0123 is for example same as 3021 or 1302.. )

So start with :
Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0

If it runs without crashing for some time, try the next one :

Code:
SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1

and so on, until you find the one that makes the trouble.

Then try combining tweaks to find a combination that works for you.

If you have older gen. Ryzens, try this combination of tweaks :

Code:
--randomx-use-tweaks 0134


===========================================
INFORMATIONS
===========================================

SRBMiner-Multi is supported by Awesome Miner

If you get "Insufficient system resources available to allocate X kB in large-page memory" message, that means you dont have enough FREE memory left, a computer restart should solve this.
Large-page memory regions may be difficult to obtain after the system has been running for a long time because the physical space for each large page must be contiguous, but the memory may have become fragmented.
If you still get this message even after restarting, try increasing virtual memory.


You can find all the parameters and everything you need to get going in the readme.txt file.

This thread is self moderated, because in the previous SRBMiner thread there was too much spam and garbage, which wasn't removed by the forum moderators.

Update infos :

V0.4.1
+ Added CPU algorithm 'minotaur' (Ring coin)
+ Added CPU algorithm 'yespowerres' (Resistance coin)
+ 2-4% faster 'cryptonight_bbc' on some GPU's
+ Minor bug fixes

V0.4.0
+ Added algorithm 'randomkeva' (Keva coin upcoming algorithm)
+ Added Navi support for 'cryptonight_bbc' algorithm
+ Much better auto setup for RX 4xx/5xx 8G cards on 'cryptonight_bbc' algorithm

V0.3.9
+ Miner now works on older linux distributions ( Ubuntu 16.04 - glibc2.23 )
+ Small hashrate increase on 'cryptonight_bbc' algorithm for some GPU's
+ Yescrypt algorithms hashrate increase on CPU if miner run with administrator/root privilege
+ Fixed GPU sensors reading on Linux
+ Fixed a bug that sometimes stopped hashing when connected to the pool after a long reconnect period
+ Renamed '--disable-randomx-tweaks' parameter to '--disable-msr-tweaks', '--disable-tweaking' to '--disable-gpu-tweaking', and '--randomx-use-tweaks' to '--msr-use-tweaks'
+ Minor bug fixes

V0.3.8
+ Hashrate increased even more on 'kadena' algorithm, and at the same time lowered power usage
+ Small hashrate increase on 'yescrypt' CPU algorithms
+ Minor bug fixes

V0.3.7
+ 'kadena' algorithm huge hashrate increase
+ Added 'gpu_' prefix to GPU related parameters in config file : gpu_intensity, gpu_raw_intensity, gpu_worksize, gpu_threads, gpu_tweak_profile, gpu_target_temperature, gpu_shutdown_temperature, gpu_off_temperature. 'gpu_conf' parameters naming stays the same.
+ Added new parameters in config file : cpu_threads, cpu_affinity, cpu_priority
+ Renamed 'pool_use_tls' in pool configuration file to 'tls'


V0.3.6
+ 'cryptonight_bbc' algorithm updated (active from block 133060)
+ Added '--enable-opencl-cleanup' parameter to enable OpenCL resources freeing on miner exit/restart (default is disabled because it can hang miner if driver crashed)

V0.3.5
+ Added 'cryptonight_bbc' algorithm (BigBangCore) - DevFee 2.5%
+ Lowered devfee for 'bl2bsha3' to 2%
+ Some gpu's might get a tiny hashrate increase on 'bl2bsha3'
+ Gpu sensors now available in Linux
+ --adl-disable parameter now available in Linux
+ --shutdown-temperature parameter (shutdown_temperature in config) now available in Linux
+ --gpu-off-temperature parameter (off_temperature in config) now available in Linux
+ Removed option to set difficulty for 'bl2bsha3' in password field
+ Removed notification for 6block stratum compatibility
+ Possibly fixed a bug where miner shows it's hashing (always shows exactly same hashrate), but gpu's are stalled

V0.3.4
+ Fixed share accepted/rejected display issue with 6block pool (HNS)
+ Fixed miner auto restarting issue on Linux
+ Tiny hashrate increase on 'bl2bsha3' with some GPU's

V0.3.3
+ Hashrate increase on 'bl2bsha3' algorithm (~ 10-15% )
+ Added support for Navi (gfx1010) cards for 'bl2bsha3' (let's just say it works)
+ Added possibility to set difficulty for 'bl2bsha3' . Just enter it in the pool password field.
+ Miner can be now used on pools other than 6block if they implement the same stratum protocol as 6block

V0.3.2
+ Added algorithm 'bl2bsha3' (Handshake (HNS) coin - 6block.com pool only)
+ RandomX fixes
+ Added '--gpu-platform' parameter to cmd config, and 'gpu_platform' to configuration files to force opencl platform
+ Added '--randomx-use-1gb-pages' parameter to config, whiche enables 1GB sized page files if supported by CPU
+ When reading pools or algorithms configuration file, if invalid entry found it will be just skipped

V0.3.1
+ Fixed ERROR 0x4002

V0.3.0
+ First version for Linux (Tested on Ubuntu 18.04)
+ Removed RandomV (MoneroV) algorithm
+ Added 'defyx' algorithm (Scala)
+ Added 'yespoweritc' algorithm (Intercoin)
+ Added 'cryptonight_catalans' algorithm (CatalansCoin)
+ Added 'cryptonight_talleo' algorithm (Talleo)
+ --randomx-use-tweaks accepts now values from 0-4, [ 0 - Intel, 0,1,2,3,4 - AMD ]
+ Added parameter 'worker' to pools config and cmd parameters -> defines worker name for RPC2
+ a lot of bug fixes

V0.2.0
+ Added RandomV algorithm (MoneroV)
+ Added --randomx-use-tweaks , to select the MSR tweak/s to apply
+ Added RandomX tweak support for Intel Core2 processors

V0.1.9 beta
+ Added RandomSFX algorithm (SafexCash)
+ RandomX algorithm/s improvements
+ Added RandomX algorithm/s extra tweak that can increase hashrate
+ Added parameter --disable-randomx-tweaks
+ Fixed K12 algorithm
+ --cpu-priority now affects main process too (not just worker threads)
+ default --cpu-priority is now 2 (below normal)
+ bug fixes
+ added license text to readme for RandomX and WinRing0

V0.1.8 beta
+ Added Kadena algorithm (pool mining only)
+ Added yespoweric algorithm (IsotopeC)
+ Added yespoweriots algorithm (IOTScoin)
+ Added yespower2b AVX support
+ Fixed nicehash protocol compatibility with rpc2
+ Miner now won't quit if not enough free RAM for an algorithm, it will just warn the user

V0.1.7 beta
+ Added 'm7mv2' algorithm (Magi coin - XMG)
+ Cpu auto configuration should be better than on previous versions
+ Added CPU data to API, also rearranged a few things in API
+ Console window 'Quick Edit' mode disabled on miner start, so users won't accidentally pause miner by clicking in the console window

V0.1.6 beta
+ Fixed threads binding on systems with more than 1 numa node
+ Better auto configuration for cpu mining
+ Previous two fixes should bring higher hashrates
+ Added pool controlled algorithm switching capability (Monero Ocean)
+ Added pool config parameter "algo_min_time" and --algo-min-time to cli (Monero Ocean)
+ Added pool config parameter "keepalive" and --keepalive to cli

V0.1.5 beta
+ Added cpu algorithms : RandomX, RandomXL, RandomWow, RandomArq
+ Added cli parameters: --cpu-priority, --disable-huge-pages, --disable-hw-aes, --disable-numa
+ Added pool config parameter 'start_block_height' and --start-block-height cli parameter
+ Fixed a bug that limited the number of threads useable for cpu mining
+ Fixed cpu affinity parameter and thread/s binding to affinity mask
+ Where possible, now using huge pages if available, this should bring a slight performance increase
+ Removed OpenCL dependency if using only cpu miner
+ Added limited Overdrive8 support (adl type 3)

V0.1.4 beta
+ Fixed a critical bug with work creation for fast algorithms [k12, keccak]

V0.1.3 beta
+ Keccak algorithm +15% faster on gpu
+ K12 algorithm +8-12% faster on gpu [vega56 ~1700mhs]
+ Guided setup got smarter a little bit

V0.1.2 beta
+ Added support for kangaroo12 algo [k12]
+ All algorithms that have a fee now have the same ~0.85% devfee
+ More bug fixes

V0.1.1 beta
+Added yespowerltncg, yespowersugar, yespowerurx, yespower2b, eaglesong (nervos-ckb) algorithms
+Added support for SHA with yespower algorithm family
+Bug fixes

poslano v temi :: SRBMiner-MULTI AMD & CPU Miner 0.4.1
Pes :: 19.04.2020 ob 14:44
Changes in version 4.9c (since 4.8c):

Added support for AMD RX5500 cards
Added support for the latest AMD Windows drivers 19.12.3
Adding support for AMD Linux drivers 19.50-967956
Adding option -rate 2 to use the command name "eth_submitHashRate" instead of "eth_submitHashrate" when solo mining
Fixed the problem with loading NVML with the latest Nvidia drivers
Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
Added an HTML version of the documentation for better navigation and readability
Other small improvements and fixes.

You can download PhoenixMiner 4.9c from here:

(MEGA)

Screenshot:


Changes in version 4.8c:

Added support for the latest AMD drivers under Linux 19.30-934563 and for mining with RX5700 cards under Linux. Note that drivers are quite buggy and most of the overclocking options don't work, as well as most of the hardware monitoring options.
Added a new flexible way for setting GPU-specific options with selectors. Example: -cclock 1-3:1090,4:1300 -mclock nvidia:+450,amd:2000,*:1900,gtx*1070*ti:+200 See Readme.txt for more information.
Added command-line option -gbase to set 0-base or 1-based GPU indexes (the default is 1). With -gbase 1 (the default), the first GPU is GPU1, then GPU2, etc. With -gbase 0 the first GPU is GPU0, second - GPU1, etc. Note that this also changes the indexes that are used with all command line options that accept GPU indexes (e.g. -gpus) as well as these used with the interactive commands on the miner shell window
Validated support for the latest AMD Windows drivers 19.11.3 (but they already work with 4.7c because there were no significant changes in the OpenCL driver)
Other small improvements and fixes.

PhoenixMiner is fast (arguably the fastest) Ethash (ETH, ETC, Muiscoin, EXP, UBQ, etc.) miner that supports
both AMD and Nvidia cards (including in mixed mining rigs). It runs under Windows x64 and Linux x64
and has a developer fee of 0.65% (the lowest in the industry). This means that every 90
minutes the miner will mine for us, its developers, for 35 seconds.

PhoenixMiner also supports Ubqhash for mining UBQ, ProgPOW for mining BCI, and dual mining
Ethash/Ubqhash with Blake2s.

The speed is generally faster than Claymore's Ethereum miner in eth only mode
(we have measured about 0.4-1.3% speed improvement but your results may be slightly lower or
higher depending on the GPUs). To achieve highest possible speed on AMD cards it may be needed
to manually adjust the GPU tune factor (a number from 8 to about 400, which can be changed
interactively with the + and - keys while the miner is running).

If you have used Claymore's Dual Ethereum miner, you can switch to PhoenixMiner with
minimal hassle as we support most of Claymore's command-line options and confirguration
files.

Please note that PhoenixMiner is extensively tested on many mining rigs but there still may be some bugs.
Additionally, we are actively working on bringing many new features in the future releases.
If you encounter any problems or have feature requests, please post them here (in this thread).
We will do our best to answer in timely fashion.


1. Quick start

You can download PhoenixMiner 4.9c from here:


https://mega.nz/folder/QSAVVaoS#bCFZeeUzKdvMudrY4zFWog (MEGA)

Examples of settings for different pools.

ethermine org (ETH):
PhoenixMiner.exe -pool eu1 ethermine org:4444 -pool2 us1 ethermine org:4444 -wal YourEthWalletAddress.WorkerName -proto 3
ethermine org (ETH, secure connection):
PhoenixMiner.exe -pool ssl: //eu1 ethermine org: 5555 -pool2 ssl: //us1 ethermine org: 5555 -wal YourEthWalletAddress.WorkerName -proto 3
ethpool org (ETH):
PhoenixMiner.exe -pool eu1 ethpool org:3333 -pool2 us1 ethpool org:3333 -wal YourEthWalletAddress.WorkerName -proto 3
dwarfpool com (ETH):
PhoenixMiner.exe -pool eth-eu dwarfpool com:8008 -wal YourEthWalletAddress / WorkerName -pass x
nanopool org (ETH):
PhoenixMiner.exe -pool eu1 nanopool org:9999 -wal YourEthWalletAddress / WorkerName -pass x
nicehash (ethash):
PhoenixMiner.exe -pool stratum + tcp: //daggerhashimoto eu nicehash com: 3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0
f2pool (ETH):
PhoenixMiner.exe -epool eth f2pool com:8008 -ewal YourEthWalletAddress -pass x -worker WorkerName
miningpoolhub (ETH):
PhoenixMiner.exe -pool us-east ethash-hub miningpoolhub com:20535 -wal YourLoginName.WorkerName -pass x -proto 1
coinotron com (ETH):
PhoenixMiner.exe -pool coinotron com:3344 -wal YourLoginName.WorkerName -pass x -proto 1
ethermine org (ETC):
PhoenixMiner.exe -pool eu1-etc ethermine org:4444 -wal YourEtcWalletAddress.WorkerName
dwarfpool com (EXP):
PhoenixMiner.exe -pool exp-eu dwarfpool com:8018 -wal YourExpWalletAddress / WorkerName
miningpoolhub (MUSIC):
PhoenixMiner.exe -pool europe ethash-hub miningpoolhub com:20585 -wal YourLoginName.WorkerName -pass x -proto 1
ubiqpool (UBIQ):
PhoenixMiner.exe -pool stratum + tcp: //eu ubiqpool io: 8008 -wal YourUbiqWalletAddress -pass x -worker WorkerName
minerpool net (PIRL):
PhoenixMiner.exe -pool pirl minerpool net:8002 -wal YourPirlWalletAddress -pass x -worker WorkerName
dodopool com (Metaverse ETP):
PhoenixMiner.exe -pool etp dodopool com:8008 -wal YourMetaverseETPWalletAddress -worker Rig1 -pass
minerpool net (Ellaism):
PhoenixMiner.exe -pool ella minerpool net:8002 -wal YourEllaismWalletAddress -worker Rig1 -pass x

Pool options:

3. Command-line arguments


Note that PhoenixMiner supports most of the command-line options of Claymore's dual Ethereum miner
so you can use the same command line options as the ones you would have used with Claymore's miner.

-pool <host rt> Ethash pool address (prepend the host name with ssl:// for SSL pool, or http:// for solo mining)
-wal <wallet> Ethash wallet (some pools require appending of user name and/or worker)
-pass <password> Ethash password (most pools don't require it, use 'x' as password if unsure)
-worker <name> Ethash worker name (most pools accept it as part of wallet)
-proto <n> Selects the kind of stratum protocol for the ethash pool:
1: miner-proxy stratum spec (e.g. coinotron)
2: eth-proxy (e.g. dwarfpool, nanopool) - this is the default, works for most pools
3: qtminer (e.g. ethpool)
4: EthereumStratum/1.0.0 (e.g. nicehash)
5: EthereumStratum/2.0.0
-coin <coin> Ethash coin to use for devfee to avoid switching DAGs:

auto: Try to determine from the pool address (default)
eth: Ethereum
etc: Ethereum Classic
exp: Expanse
music: Musicoin
ubq: UBIQ
pirl: Pirl
ella: Ellaism
etp: Metaverse ETP
pgc: Pegascoin
akroma: Akroma
whale: WhaleCoin
vic: Victorium
nuko: Nekonium
mix: Mix
egem: EtherGem
aura: Aura
hbc: Hotelbyte Coin
gen: Genom
etz: EtherZero
clo: Callisto
dbix: DubaiCoin
moac: MOAC
etho: Ether-1
etcc: EtherCC
yoc: Yocoin
b2g: Bitcoiin2Gen
esn: Ethersocial
ath: Atheios
reosc: REOSC

4. Configuration files

Note that PhoenixMiner supports the same configuration files as Claymore's dual Ethereum miner
so you can use your existing configuration files without any changes.

Instead of using command-line options, you can also control PhoenixMiner with configuration
files. If you run PhoenixMiner.exe without any options, it will search for the file config.txt
in the current directory and will read its command-line options from it. If you want, you can
use file with another name by specifying its name as the only command-line option
when running PhoenixMiner.exe.

You will find an example config.txt file in the PhoenixMiner's directory.

Instead of specifying the pool(s) directly on the command line, you can use another configuration
file for this, named epools.txt. There you can specify one pool per line (you will find an example
epools.txt file in the PhoenixMiner's directory).

For the dual mining pools, you can use the dpools.txt file, which has the same format as epools.txt
but for the secondary coin. You will find an example epools.txt file in the PhoenixMiner's directory.
Note that unlike the epools.txt, which is loaded each time when the miner starts, the dpools.txt file
is only read if you specify a dual mining pool on the command line with -dpool, or at least add
the -dcoin blake2s command-line option.

The advantages of using config.txt and epools.txt/dpools.txt files are:
- If you have multiple rigs, you can copy and paste all settings with these files
- If you control your rigs via remote control, you can change pools and even the miner options by
uploading new epools.txt files to the miner, or by uploading new config.txt file and restarting
the miner.

5. Remote monitoring and management

Phoenix miner is fully compatible with Claymore's dual miner protocol for remote monitoring and
management. This means that you can use any tools that are build to support Claymore's dual miner,
including the "Remote manager" application that is part of Claymore's dual miner package.

We are working on much more powerful and secure remote monitoring and control functionality and
control center application, which will allow better control over your remote or local rigs and some
unique features to increase your mining profits.

poslano v temi :: PhoenixMiner 4.9c: fastest Ethereum/Ethash miner with lowest DevFee (Win/Lnx)
Pes :: 17.04.2020 ob 20:57
Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner.
=========================

Latest version is v15.0 - Supercharged Edition:

- now miner supports up to #384 epoch (4GB DAG size). Note that previous versions support up to #299 epoch, you will not be able to use old versions after #299 epoch.
- added support for Navi cards (ETH-only mode).
- now miner sets environment variables automatically (required for 4GB AMD cards).
- a few minor bug fixes and improvements.


DOWNLOAD LINK: MEGA - https://mega.nz/#F!RPJBFaJA!yJYGU_3KCPQ4g5Pvm3F6BQ

version is v14.7 - Supercharged Edition:

- now the miner driver does not require switching Windows to Test Mode. If you want to turn Test Mode off, use "-driver uninstall" option (with admin rights) and reboot,
then start miner with admin rights to install new driver automatically when necessary (or use "-driver install" option directly).
If you have any problems with signed driver you can use "-driver install_test" option, it uses old approach: enables Test Mode (reboot is required) and installs unsigned driver.
- added "-showpower" option for stats about GPU power consumption, press "s" to see it. Both AMD and Nvidia cards are supported, except Linux gpu-pro drivers and Radeon7 cards.
- updated Remote Manager to show total power consumption.
- fixed issue with "-logsmaxsize" option when "-logfile" option is used to specify directory for log files.
- a few minor bug fixes and improvements.

version is v14.6 - Supercharged Edition:

- now "-rxboost" option also supports old AMD cards (Hawaii, Tonga, Tahiti, Pitcairn), use "-rxboost 1" to improve hashrate up to 5% by applying some additional memory timings.
- now "-rxboost" option supports all AMD drivers.
- now "-strap" for AMD cards also supports AMD blockchain drivers.
- some changes to further reduce stale shares a bit.
- added "-minspeedtime" option.
- added statistics for shares accepting time (min/max/average), press "s" to see it.
- updated Remote Manager to show shares accepting time.
- a few minor bug fixes and improvements.

FEATURES:

- Supports applying optimized memory timings (straps) on-the-fly in Windows, without flashing VBIOS (currently Polaris, Vega, Nvidia 10xx cards only), up to 20% speedup. Best straps for Ethereum are included.
- Supports new "dual mining" mode: mining both Ethereum and Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak at the same time, with no impact on Ethereum mining speed. Ethereum-only mining mode is supported as well.
- Effective Ethereum mining speed is higher by 3-5% because of a completely different miner code - much less invalid and outdated shares, higher GPU load, optimized OpenCL code, optimized assembler kernels.
- Supports both AMD and nVidia cards, even mixed.
- No DAG files.
- Supports all Stratum versions for Ethereum: can be used directly without any proxies with all pools that support eth-proxy, qtminer or miner-proxy.
- Supports Ethereum and Siacoin solo mining.
- Supports both HTTP and Stratum for Decred.
- Supports both HTTP and Stratum for Siacoin.
- Supports Stratum for Lbry, Pascal, Blake2s, Keccak.
- Supports failover.
- Displays detailed mining information and hashrate for every card.
- Supports remote monitoring and management.
- Supports GPU selection, built-in GPU overclocking features and temperature management.
- Supports Ethereum forks (Expanse, etc).
- Windows and Linux versions.


This version is POOL/SOLO for Ethereum, POOL for Decred, POOL/SOLO for Siacoin, POOL for Lbry, POOL for Pascal, POOL for Blake2s, POOL for Keccak.

For old AMD cards, Catalyst (Crimson) 15.12 is required for best performance and compatibility.
For AMD 4xx/5xx cards (Polaris) you can use any recent drivers.
For AMD cards, set the following environment variables, especially if you have 2...4GB cards:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100

This miner is free-to-use, however, current developer fee is 1%, every hour the miner mines for 36 seconds for developer.
For all 2GB cards and 3GB cards devfee is 0%, so on these cards you can mine all ETH forks without devfee, this miner is completely free in this case.
If some cards are 2...3GB and some >3GB, 2...3GB cards still mine for you during devfee time, only cards that have more than 3GB memory will be used for devfee mining. Miner displays appropriate messages during startup.
Second coin (Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak) is mined without developer fee.
So the developer fee is 0...1%, if you don't agree with the dev fee - don't use this miner, or use "-nofee" option.
Attempts to cheat and remove dev fee will cause a bit slower mining speed (same as "-nofee 1" though miner will show same hashrate.
Miner cannot just stop if cheat is detected because creators of cheats would know that the cheat does not work and they would find new tricks. If miner does not show any errors or slowdowns, they are happy.

This version is for recent AMD videocards only: 7xxx, 2xx and 3xx, 2GB or more. Recent nVidia videocards are supported as well.

CONFIGURATION FILE

You can use "config.txt" file instead of specifying options in command line.
If there are not any command line options, miner will check "config.txt" file for options.
If there is only one option in the command line, it must be configuration file name.
If there are two or more options in the command line, miner will take all options from the command line, not from configuration file.
Place one option per line, if first character of a line is ";" or "#", this line will be ignored.
You can also use environment variables in "epools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.

If for Ethereum-only mining:

ethpool:
EthDcrMiner64.exe -epool us1.ethpool.org:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

sparkpool:
EthDcrMiner64.exe -epool eu.sparkpool.com:3333 -ewal 0xD69af2A796A737A103F12d2f0BCC563a13900E6F -epsw x

f2pool:
EthDcrMiner64.exe -epool eth.f2pool.com:8008 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

nanopool:
EthDcrMiner64.exe -epool eth-eu1.nanopool.org:9999 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -eworker rig1

nicehash:
EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1LmMNkiEvjapn5PRY8A9wypcWJveRrRGWr -epsw x -esm 3 -allpools 1 -estale 0

Ethereum forks mining:

EthDcrMiner64.exe -epool exp-us.dwarfpool.com:8018 -ewal 0xd69af2a796a737a103f12d2f0bcc563a13900e6f -epsw x -allcoins -1

Ethereum SOLO mining (assume geth is on 192.168.0.1:8545):

FAILOVER

Use "epools.txt" and "dpools.txt" files to specify additional pools (you can use "-epoolsfile" and "-dpoolsfile" options to use different filenames).
These files have text format, one pool per line. Every pool has 3 connection attempts.
Miner disconnects automatically if pool does not send new jobs for a long time or if pool rejects too many shares.
If the first character of a line is ";" or "#", this line will be ignored.
Do not change spacing, spaces between parameters and values are required for parsing.
If you need to specify "," character in parameter value, use two commas - ,, will be treated as one comma.
You can reload "epools.txt" and "dpools.txt" files in runtime by pressing "r" key.
Pool specified in the command line is "main" pool, miner will try to return to it every 30 minutes if it has to use some different pool from the list.
If no pool was specified in the command line then first pool in the failover pools list is main pool.
You can change 30 minutes time period to some different value with "-ftime" option, or use "-ftime 0" to disable switching to main pool.
You can also use environment variables in "epools.txt", "dpools.txt" and "config.txt" files. For example, define "WORKER" environment variable and use it as "%WORKER%" in config.txt or in epools.txt.
You can also select current pool in runtime by pressing "e" or "d" key.


REMOTE MONITORING/MANAGEMENT

Miner supports remote monitoring/management via JSON protocol over raw TCP/IP sockets. You can also get recent console text lines via HTTP.
Start "EthMan.exe" from "Remote management" subfolder (Windows version only).
Check built-in help for more information. "API.txt" file contains more details about protocol.


KNOWN ISSUES

- AMD cards: on some cards you can notice non-constant mining speed in dual mode, sometimes speed becomes a bit slower. This issue was mostly fixed in recent versions, but not completely.
- AMD cards: in Linux with gpu-pro drivers, the list of GPUs may differ from the list of temperatures. You can use -di to change order of GPUs to match both lists.
- nVidia cards: dual mode is not so effective as for AMD cards.
- Windows 10 Defender recognizes miner as a virus, some antiviruses do the same. Miner is not a virus, add it to Defender exceptions.
I write miners since 2014. Most of them are recognized as viruses by some paranoid antiviruses, perhaps because I pack my miners to protect them from disassembling, perhaps because some people include them into their botnets, or perhaps these antiviruses are not good, I don't know. For these years, a lot of people used my miners and nobody confirmed that my miner stole anything or did something bad.
Note that I can guarantee clean binaries only for official links in my posts on this forum (bitcointalk). If you downloaded miner from some other link - it really can be a virus.
However, my miners are closed-source so I cannot prove that they are not viruses. If you think that I write viruses instead of good miners - do not use this miner, or at least use it on systems without any valuable data.


TROUBLESHOOTING

1. Install Catalyst v15.12 for old AMD cards; for Fury, Polaris and Vega cards use latest blockchain drivers.
2. Disable overclocking.
3. Set environment variables as described above.
4. Set Virtual Memory 16 GB or more.
5. Reboot computer.
6. Check hardware, risers.
7. Set some timeout in .bat file before starting miner at system startup (30sec or even a minute), and try "-ethi 4" to check if it is more stable. It can help if miner is not stable on some system.


FAQ

- Miner works too slowly when I mine ETH/ETC but works fine when I mine some ETH fork.
Check if you enabled "Compute Mode" in AMD drivers, also you can press "y" key to turn on "Compute Mode" in AMD drivers for all cards (Windows only).

- I cannot mine ETH/ETC with Nvidia 3GB card in Windows 10.
Windows 10 internally allocates about 20% of GPU memory so applications can use only 80% of GPU memory. Use Windows 7 or Linux.

poslano v temi :: Claymore's Dual Ethereum + Decred/Siacoin/Lbry/Pascal/Blake2s/Keccak AMD+NVIDIA GPU Miner
vajda :: 15.04.2020 ob 20:06
Zelo perspektivna stran za pridobivanje kriptovalute prihodnosti to je pi valuta. Potrebno je samo zadevo naložiti na telefon in jo enkrat na dan potrditi in se vam pi valuta avtomatsko nalaga.
Registrirate se lahko na spodnji povezavi:

povezava

poslano v temi :: Pi kriptovaluta prihodnosti
Pes :: 15.04.2020 ob 20:05
NPlusMiner



NPlusMiner now with a AI, GUI, AutoUpdate, Earnings Tracker and Monitoring

NPlusMiner Monitors mining pools in real-time in order to find the most profitable Algo/Pool and comes with a GUI and autoupdate feature



Downloads: NPlusMiner v7.0.6

ChangeLog


ChangeLog 7.0.6

Fixed BrainPlus not working with some Culture config.
Added message on API request failures

ChangeLog 7.0.4

Fixed BrainPlus not working on some pools.
Adjust console width at start

ChangeLog 7.0.3

Added Arctichash support
ChangeLog 7.0.2

Fixed an issue with dual miners when algo is not available
ChangeLog 7.0.1

All miners updated to latest version
Added Dual mining support (Ethash/Hanshake and Ethash/Eaglesong)
Added Kawpow support (RVN Fork)
Added API server feature
NPlusMiner can act as an Pool API server for other instances
This is useful when running several instances behind the same IP.
So pool won't ban for too many requests on the API



NPlusMiner Monitors mining pools in real-time in order to find the most profitable Algo

GUI and easy configuration
Auto Benchmarks Each algo to get optimal speeds
Fully automated
Auto Downloads Miners

Easy configuration, easy start in two steps:

Run NPLusMiner

1. Enter your BTC address
2. Hit "Start"


Fee:

There is a 8 minutes per day fee (0.5%), that can be changed in the config (Minimum is 3)
When less than 3 minutes is set, lottery is 0 or any walue between 3 and 8



Features list

GUI

Since version 2.0 NPlusMiner has a GUI making it easy to configure and run.
Relies on config files. No need to edit bat files. Simply run NPlusMiner
Set your wallet address and hit start
For console lovers. Run NPlusMiner-ConsoleUp.

AutoUpdate

Since version 4.0 NPlusMiner integrates an AutoUpdate feature.

Pause Mining

Ability to pause miners while keeping other jobs running (pause button)
This will stop mining activity
BrainPlus will still run in the background avoiding the learning phase on resume
EarningTracker will still run in the background avoiding the learning phase on resume

prerun

Ability to run a batch prior switching to a specific algo.
For example, can be used to set per algo OC via nvidiaInspector
Simply create a file named <AlgoName>.bat in prerun folder
If <AlgoName>.bat does not exist, will try to launch prerun/default.bat
Use overclock with caution

Per pools config (Advanced)

- **This is for advanced users. Do not use if you do not know what you are doing.**
- You can now set specific options per pool. For example, you can mine NiceHash on the internal wallet and other pools on a valid wallet. This configuration is provided as an example in ConfigPoolsConfig-NHInternal.json
- Available options
- Wallet = your wallet address
- UserName = your MPH user name
- WorkerName = your worker name
- PricePenaltyFactor = See explanation below
- Usage
- The file ConfigPoolsConfig.json contains per pool configuration details. If a pool is listed in this file,
the specific settings will be taken into account. If not, the setting for the entry name default will be used.
**Do not delete the default entry.**
- Edit ConfigPoolsConfig.json
- Add an entry for the pool you want to customize
- The name must be the NPlusMiner name for the pool. ie. for ahashpool, if you use Plus. The name is ahashpoolplus.
- (**careful with json formating**)
- Best way is to duplicate the default entry
- Note that the GUI only updates the default entry. Any other changes need to be done manualy

PricePenaltyFactor (Advanced)

- When using advanced per pool configuration, it is possible to add a penalty factor for a specific pool. This simply adds as a multiplicator on estimations presented by the pool.
- Example scenario
- NiceHash as a 4% fee - Set PricePenaltyFactor to 0.96 (1-0.04)
- You feel like a pool is exaggerating his estimations by 10% - Set PricePenaltyFactor to 0.9

BrainPlus - ahashpoolplus / zergpoolplus / zpoolplus / blazepoolplus / BlockMastersPlus / PhiPhiPoolPlus / StarPoolPlus / HashRefineryPlus

Uses calculations based on 24hractual and currentestimate ahashpool prices to get more realistic estimate.
Includes some trust index based on past 1hr currentestimate variation from 24hr.
AND is NOT sensible to spikes.
This shows less switching than following Current Estimate and more switching that following the 24hr Actual.
Better profitability.

Pools variants

24hr - uses last 24hour Actual API too request profit
-Low switching rate
plus - uses advanced calculations to maximize profit
-**Best switching rate**
normal - uses current estimate API too request profit
-High switching rate

Earnings Tracking

Displays BTC/H and BTC/D as well a estimation of when the pool payment threshold will be reached.
Supported pools:
ahashpool
zergpool
zpool
nicehash
miningpoolhub (partial)
Blazepool
BlockMasters
PhiPhipool
Starpool
HashRefinery
If mining more that one pools, shows stats for any supported pool
Press key e in the console window to show/hide earnings

Support running multiple instances

**Experimental**
More than one instance of NPlusMiner can run on the same rig
Each instance must be placed in it's own directory
Miner has to be started prior the launch of the next instance

Optional miners (Advanced)

Some miners are not enabled by default in NPlusMiner for a variety of reasons
A new folder can be found called "OptionalMiners" containing .ps1 files for some miners
For advanced users, refer to OptionalMinersReadme.txt on how to use

Algo switching log

Simple algo switching log in csv switching.log file found in Logs folder.
You can easily track switching rate.

Console Display Options

Use -UIStyle Light or -UIStyle Full in config.json
Full = Usual display
Light = Show only currently mining info (Default)
UIStyle automaticaly swtiches to Full during benchmarking.

In session console display toggle

Press key s in the window to switch between light and full display
Press key e in the window to show/hide earnings
Will toggle display at next refresh

We like beer, feel free to buy one

nemo = 1QGADhdMRpp9Pk5u5zG1TrHKRrdK5R81TE

MrPlus = 134bw4oTorEJUUVFhokDQDfNqTs7rBMNYy

poslano v temi :: NPlusMiner - | NVIDIA/AMD/CPU |AI| Autoupdate | Monitoring | Pool/Algo switching 7.0.6