FORUM 
PRIJAVI SE in sodeluj na forumu, komentiraj, ocenjuj... Registriraš se v samo 10ih sekudah!
Ace Grin Miner v 1.3
We are developing a fast multi-gpu windows miner for cuckaroo29 mining algorithm which is used in Grin - a new community-driven implementation of Mimblewimble. New in v 1.3: 4-8% speed increase on Nvidia GPUs with fast CPUs Support for 6GB Nvidia GPUs (will work on Win7, Win10 reserves too much memory) Bug fixes Nvidia 6GB mining cards notes: 1060 6Gb you have to migrate to windows 7 P106 works on windows 10 no need to migrate Make sure you have the following security update on windows 7 the miner will not start without it Features: Supports Nvidia/AMD GPUs with a min of 7gb VRAM Simple configuration/auto-detection of GPUs and CPU settings 4-6% speed improvement over grin gold miner Ongoing development and dedicated Discord support channel Moderate 1% dev fee to fund future development Linux and Mac versions under development Expected speeds for typical GPUs: 1080TI - 4.6 gps, 1080 3.6 gps, 1070ti 3.2 gps Quick Launch Guide: Optional: switch your Nvidia GPUs to "P0 power state" as it seems to increase performance. See tutorial at the bottom Update drivers: Nvidia just use the latest, AMD we recommend 18.6.1 adrenaline drivers Download and install 2.2.1 .NET Core libraries Note: restart required Set virtual memory to 40-56GB (about 7gb per GPU) Run start.bat and input your pool data. We recommend the following pools: grinmint.com f2pool.com sparkpool.com Optional: Input failover pool details manually into the created config.xml under <SecondaryConnection> similar to <PrimaryConnection> Run start.bat to begin mining Download Links AceGrinMiner_v1.3_windows_x64.zip https://mega.nz/#F!IXgFXCJK!tsc_ImSclH8X2M4I8dxHWA AceGrinMiner-1.3-linux-64.tar.xz https://mega.nz/#!UpUxiADB!-sCgA7jHZzmYJHPjN-8Np7Z5kq5-kvtUxfnpzjpAG4M Mining speed: Nvidia driver 416.34 [v 1.3] 1060 (+100 0 101W) - 2,2 gps 1070Ti (+100 0 145W) - 3,4 gps 1080 (+100 0 150W) - 3,9 gps 1080Ti (+100 0 210W) - 4,85 gps 1080Ti (+100 0 155W) - 4,6 gps AMD adrenaline 18.6.1 [v 1.1] RX570 8Gb (cc:1340 mc:1750) - 1,7 gps RX480 8Gb (cc:1330 mc:2000) - 1,9 gps (Celeron 3930, 4Gb RAM) poslano v temi :: [ANN] AceMiner 1.3 Fast Grin Mimblewimble Cuckoo cycle miner for AMD/Nvidia
 AIOMiner All-In-One Mining Operation Control Current Version: a8.6.2 Download: AIOMiner a8.6.2 Next Release: AIOMiner v9.0 - We're not good at setting launch dates Mine ANY Coin on These Supported Algorithms (103): Monitor Your Fleet (No Rig Limits)  Control Your Rigs  Synchronize with Variable Electric Rates  Save and Manage Multiple Pools and Wallets  More Great Features: No AIOMiner Fees AMD/NVIDIA Support WhatToMine.com Auto Profit Switching Auto start mining on start of application Idle Mining Display of current GPU Power usage on the front of the application (AMD is an estimate at this time) Enable Auto-Login for your windows machine Enable AIOMiner to start as soon as you boot Backup/Import settings Track Profitability in multiple currencies Automatic Crash Recovery And Much Much More! Current Release: 8.6.2 How to Update Re-Run the installer: AIOMiner a8.6.2 to your current installed directory. You won't lose any of your settings it will just update the .exe NOTICE: ALL USERS WILL NEED TO BE ON 8.6.0 IF YOU ARE USING THE API. AFTER 7/30/2019 API-KEYS WILL BE BANNED UNTIL THIS IS RESOLVED. 8.6.2 - 8/3/2019 If APIKey is enabled, we will confirm aiominer.com connectivity before checking subscription status Top 5 now go off of Profit as being on top vs Rev Fixed API status with corrupt aiosettings.json Fixed purple buttons no working in windows settings (thanks AVG) Added in est power car use to better help predict profits NOTICE: ALL USERS WILL NEED TO BE ON 8.6.0 IF YOU ARE USING THE API. AFTER 7/30/2019 API-KEYS WILL BE BANNED UNTIL THIS IS RESOLVED. 8.6.1 - 7/15/2019 Fixed bug with Profit Following where it would keep looking for a new coin every 1-2 Minutes Following profit will now quickly start vs waiting 1 minute AIOMiner will now create a backup of AIOSettings.json on load and change, in the event the file is corrupt it will restore from the backup. This should finally be the fix for Power outages corrupting AIOMiner Removed the color Red from windows settings Fix buttons to appease Virus Protection Standards. Added in API Support for NBMiner and MiniZ 8.6.0 - 6/16/2019 Created System Checks for Virtual Memory, Disk Space, Windows Defender, and Windows Update Service Windows Settings->System Check will now help users Perform tasks needed to mine safely WhatToMine Top 5 Coins will now include Profit, after using your power costs In Benchmark-Miner Settings you can adjust your Power Costs In Benchmark-Miner Settings, Subscribers can now auto-adjust their Refresh for WhatToMine Fixed multiple bugs with the API System to prepare for 9.0 Included more algos in the Benchmark and WhatToMine profit search. Added in support for 1060/ti and VII cards to help with profit matching. Updated the installer to no longer require admin right unless you are installing a framework. 8.5.5 - 5/4/2019 Fixed bug with GPU Utilization/Fan % for 16XX and 20XX Nvidia GPUS Updated commands for future website updates Updated Rig Restart to now support 1,3,6 Hours Fixed bug where we allowed non UTF-8 or Special Characters in the rigname that caused issues on the command center Fixed long loading for Subscription Checking 8.5.4 - 3/22/2019 Added CryptonightV4(R) to Profit Search Added support for Nvidia 2070 Profit Search Added CuckooCycle to Profit Search Fixed Bug with loading Schedule Reduced size of miner/benchmark window for lower resolution screens Decreased time taken to review subscription status Added CryptoNightR to benchmark Removed CryptonightV8 from Profit Search/Benchmark poslano v temi :: AIOMiner: The All-In-One Miner | No Fees | 100+ Algorithms | 8.6.2
Pi Network in Pi mining omogoča rudarjenje kriptovalute na telefonu. Pi mining je aplikacija, ki jo naložite na telefon in vam samodejno rudari kriptovaluto (medtem ne prazni baterije)
V aplikacijo in rudarjenje ni potrebno nič investirati in sta oba popolnoma brezplačna. Trenutno je še v beta fazi, tako da valuta še ne trguje na nobeni borzi, vse kar morate narediti je to da se prijavite in potem morate vsak dan (po pretečenih 24 urah klikniti na ikono za podalšanje rudarjenja (varovalka da res rudarijo ljudje in ne boti) Vstop je možen samo z povabilom od nekoga ki je že udeležen. Povabilo: https://minepi.com/Trinita13 Ali pa ročni vnos: Trinita13 Obvezno uporabiti velike in majhne črke tako kot piše,drugače ne sprejme. več si lahko preberete tukaj: https://minepi.com/ Stran je v angleščini. Probati ni greh, morda pa je to naslednik bitcoina. Lep pozdrav poslano v temi :: PI Network( free mining)
XMRig High performance, open source, cross platform RandomX, CryptoNight and Argon2 CPU/GPU miner, with official support for Windows.
Mining backends CPU (x64/x86/ARM) OpenCL for AMD GPUs. CUDA for NVIDIA GPUs via external CUDA plugin.  Download Binary releases: XMRig Download v5.5.3 #1529 Fixed crash on Bulldozer CPUs. v5.5.2 #1500 Removed unnecessary code from RandomX JIT compiler. #1502 Optimizations for AMD Bulldozer. #1508 Added support for BMI2 instructions. #1510 Optimized CFROUND instruction for RandomX. #1520 Fixed thread affinity. Usage The preferred way to configure the miner is the JSON config file as it is more flexible and human friendly. The command line interface does not cover all features, such as mining profiles for different algorithms. Important options can be changed during runtime without miner restart by editing the config file or executing API calls. Command line options Network: -o, --url=URL URL of mining server -a, --algo=ALGO mining algorithm --coin=COIN specify coin instead of algorithm -u, --user=USERNAME username for mining server -p, --pass=PASSWORD password for mining server -O, --userpass=U  usernameassword pair for mining server-k, --keepalive send keepalive packet for prevent timeout (needs pool support) --nicehash enable nicehash.com support --rig-id=ID rig identifier for pool-side statistics (needs pool support) --tls enable SSL/TLS support (needs pool support) --tls-fingerprint=HEX pool TLS certificate fingerprint for strict certificate pinning --daemon use daemon RPC instead of pool for solo mining --daemon-poll-interval=N daemon poll interval in milliseconds (default: 1000) -r, --retries=N number of times to retry before switch to backup server (default: 5) -R, --retry-pause=N time to pause between retries (default: 5) --user-agent set custom user-agent string for pool --donate-level=N donate level, default 5%% (5 minutes in 100 minutes) --donate-over-proxy=N control donate over xmrig-proxy feature CPU backend: --no-cpu disable CPU mining backend -t, --threads=N number of CPU threads -v, --av=N algorithm variation, 0 auto select --cpu-affinity set process affinity to CPU core(s), mask 0x3 for cores 0 and 1 --cpu-priority set process priority (0 idle, 2 normal to 5 highest) --cpu-max-threads-hint=N maximum CPU threads count (in percentage) hint for autoconfig --cpu-memory-pool=N number of 2 MB pages for persistent memory pool, -1 (auto), 0 (disable) --cpu-no-yield prefer maximum hashrate rather than system response/stability --no-huge-pages disable huge pages support --asm=ASM ASM optimizations, possible values: auto, none, intel, ryzen, bulldozer --randomx-init=N thread count to initialize RandomX dataset --randomx-no-numa disable NUMA support for RandomX --randomx-mode=MODE RandomX mode: auto, fast, light --randomx-1gb-pages use 1GB hugepages for dataset (Linux only) --randomx-wrmsr=N write custom value (0-15) to Intel MSR register 0x1a4 or disable MSR mod (-1) --randomx-no-rdmsr disable reverting initial MSR values on exit API: --api-worker-id=ID custom worker-id for API --api-id=ID custom instance ID for API --http-host=HOST bind host for HTTP API (default: 127.0.0.1) --http-port=N bind port for HTTP API --http-access-token=T access token for HTTP API --http-no-restricted enable full remote access to HTTP API (only if access token set) OpenCL backend: --opencl enable OpenCL mining backend --opencl-devices=N comma separated list of OpenCL devices to use --opencl-platform=N OpenCL platform index or name --opencl-loader=PATH path to OpenCL-ICD-Loader (OpenCL.dll or libOpenCL.so) --opencl-no-cache disable OpenCL cache --print-platforms print available OpenCL platforms and exit CUDA backend: --cuda enable CUDA mining backend --cuda-loader=PATH path to CUDA plugin (xmrig-cuda.dll or libxmrig-cuda.so) --cuda-devices=N comma separated list of CUDA devices to use --cuda-bfactor-hint=N bfactor hint for autoconfig (0-12) --cuda-bsleep-hint=N bsleep hint for autoconfig --no-nvml disable NVML (NVIDIA Management Library) support Logging: -S, --syslog use system log for output messages -l, --log-file=FILE log all output to a file --print-time=N print hashrate report every N seconds --health-print-time=N print health report every N seconds --no-color disable colored output --verbose verbose output Misc: -c, --config=FILE load a JSON-format configuration file -B, --background run the miner in the background -V, --version output version information and exit -h, --help display this help and exit --dry-run test configuration and exit --export-topology export hwloc topology to a XML file and exit Donations Default donation 5% (5 minutes in 100 minutes) can be reduced to 1% via option donate-level or disabled in source code. XMR: 48edfHu7V9Z84YzzMa6fUueoELZ9ZRXq9VetWzYGzKt52XU5xvqgzYnDK9URnRoJMk1j8nLwEVsaSWJ4fhdUyZijBGUicoD BTC: 1P7ujsXeX7GxQwHNnJsRMgAdNkFZmNVqJT poslano v temi :: XMRig RandomX, CryptoNight and Argon2 CPU miner
  Here's my new pet project. I started this during the easter holidays in 2013 and this uses CUDA to squeeze up to 200% more performance out of nVidia cards - as compared to OpenCL mining applications. [IMG] ccMiner is a collaborative project by me and a co author also named Christian (call us the C&C Hash Factory, if you will). ccMiner is less polished, but often features new coins+algorithms close to launch date (usually with a clear mining advantage for nVidia). cudaMiner Algorithms: scrypt scrypt-jane scrypt-N keccak blake (github version only) Installation requirements: - a recent nVidia driver supporting at least CUDA 5.5 - Visual Studio 2010 SP1 redistributable (redist). Install when MSVCR100.DLL is not found. ATTENTION! Fermi based devices like GTX 560, 570, 580, 590 seem to run quite hot with this release cudaMiner latest release: cudaminer [32+64bit version] speed-up for YAC (compute 3.0 or later), keccak (compute 3.5 or later) MAC-OS X compiled binaries are found here: temp not found ccMiner Algorithms: HeavyCoin MjollnirCoin Fugue Groestl Myriad-Groestl Diamond-Groestl JackpotCoin Quark AnimeCoin TalkCoin X11/DarkCoin X13/MaruCoin If you find this useful, please donate a little. How about the first litecoin you successfully mine with this app? LKS1WDKGED647msBQfLBHV3Ls8sveGncnm This is my "motivation address". Linux compilation is also possible now: chmod +x configure autogen.sh (.zip does not preserve the x bit) ./autogen.sh && ./configure && make Christian poslano v temi :: [ANN] cudaMiner & ccMiner CUDA based mining applications [Windows/Linux/MacOSX]
Hello dear forum users!
I hasten to inform the latest news ♔MORIARTY♔. ✅ A full review of the project’s smart contract: a detailed analysis of the code and functionality for hidden backdoors and vulnerabilities. Have a nice and profitable game! Sincerely, Moriarty’s team. poslano v temi :: New BlockChain Moriarty game on Smart Contract
Introduction
Zilliqa has developed a new way of mining compared to regular methods we all know of. POW is every 2-3 hours. That's right 2-3 hours. In that POW time, your miners only mine for 1 minute. I kid you not. This is to help the planet go green with mining but I am greedy and would like to use all the rest of time to mine something. Dual Mining Zilliqa Zilliqa miner already has a function to allow dual mining. For Zilliqa, dual mining is Mining on own coin (eth, jesus coin, grin, etc) while waiting for POW for Zilliqa. When POW is close, zilminer will stop your mining operations of eth (or any other coin you are mining) and begin to mine Zilliqa for one minute. After the minute has passed, it continues to mine your eth. Problem Although dual mining Zilliqa is great, it never works out the way you expect. Unexpected issues like zilminer crashing, your eth miner crashing, heck your pc crashing have been an issue from day one. Read Solution below. Introducing Zilliqa-Switcher Instead of your miners crashing, I offer you a solution to mine any other coin with any other miner while still making it in time to mine Zilliqa. This is a work in progress but it works well. Download Link https://mega.nz/#F!xbohTApQ!_xjxdb4dnYnEV1g2opMS0A Instructions Miner Numbers : Custom Scripts = 0 Phoenix Miner = 1 Claymore = 2 SRBMiner = 3 SGMiner = 4 BMiner = 5 Gminer = 6 NiceHashMinerLegacy = 7 CCMiner = 8 TT-Miner = 9 ewbf_144 = 10 NBminer = 11 Team Red Miner = 12 Xmr-Stak = 13 MinerStat = 14 (and other miner. Eg. MinerStat + Claymore = 142, MinerStat + Phoenix = 141) LoLMiner = 15 NiceHash Miner = 16 T-Rex = 17 SeroMiner = 18 Command Line -m or --miner This is required to let the script miner you would like to dual mine Zilliqa with. Below are the parameters to choose from. Example, -m 15 uses LolMiner + Zil. Custom Script = 0 ,Phoenix Miner = 1 Claymore = 2, SRBMiner = 3, SGMiner = 4, BMiner = 5, GMiner = 6, NiceHash Miner Legacy = 7, CCMiner = 8, TT-Miner = 9, ewbf_144 = 10, NBminer = 11, Team Red Miner = 12, Xmr-Stak = 13, MinerStat = 14, LolMiner = 15, NiceHash Miner = 16, T-Rex = 17, SeroMiner = 18 -r or --run This is required to start your Miner (chosen with -m). Not required for custom scripts option. Either use an exe or bat. Example -r PhoenixMiner.exe or -r start.bat -a or --address This is required to mine Zilliqa to your correct address. New or old format works. Example -a 0xe511b07b68681d4501665De40cf6A734f05da94f -w or --worker This is your miner name for mining Zilliqa. This is optional. If left empty, it uses your PC Name Custom Script Explanation This is for users that would like to use their own scripts to open and close their miner of choice. -r or --run Is not to be used for this. -s or --start Used to stop your miner. This should be a bat file. Example -s stop.bat -e or --end Used to start your miner. Example -e ewbf_144.exe or --end start.bat But... I used the old format to run this script We have you covered, we have added backward compatibility. When you update to the newest version, you old scripts should work (PM @kidkid1 if you have issues or PM me here) Examples Example #1: zil_switcher.exe -m 1 -r miner.bat -a 0xe511b07b68681d4501665De40cf6A734f05da94f Example #2: zil_switcher.exe -m 2 EthDcrMiner64.exe -a zil1u5gmq7mgdqw52qtxthjqea48xnc9m22067k4gf Example #3: zil_switcher.exe -m 2 EthDcrMiner64.exe -a zil1u5gmq7mgdqw52qtxthjqea48xnc9m22067k4gf -w miner1 Example #4: zil_switcher.exe -m 1 -r start.bat -a 0xe511b07b68681d4501665De40cf6A734f05da94f -w win_miner Example #5: zil_switcher.exe -m 0 -a 0xe511b07b68681d4501665De40cf6A734f05da94f -s stop.bat -e start.bat Run outside of Command Line Download Zilminer, Download your other miner (let's say Claymore), Download Zilliqa-Switcher Extract all files from all three downloaded packages in the same folder. Optional: Create an eth.bat script if you need to. Run Zilliqa-Switcher First option, choose your miner Second option, choose how you run your miner, either using only exe or using a bat file (created in step 3) Third option if you chose bat file, enter the name of the bat file, (eth.bat , grin.bat) Forth option, enter your Zilliqa Address. This can be the old formart Zil address or New Format Zil Address That's it [IMG] For Awesome Miner First, be sure that API is activated in Awesomeminer. Zil_Switcher start commandline: Zil_Switcher.exe -m 0 --wallet ******** --worker ****** -s stop.bat -e start.bat Wallet and Worker not really needed, but you need it that the Zilswitcher start. Now the 2 scripts to stop the main miner and start the Zilminer start.bat curl -i -d POST http://[IP_AWESOMEMINER_MAIN_PC]:17790/api/miners/[MINERID]?action=stop #stop main miner in Awesomeminer(miniZ,Gminer,lolminer etc) curl -i -d POST http://[IP_AWESOMEMINER_MAIN_PC]:17790/api/miners/[MINERID]?action=start #start zilliqa miner in Awesomeminer stop.bat curl -i -d POST http://[IP_AWESOMEMINER_MAIN_PC]:17790/api/miners/[MINERID]?action=stop #stop zilliqa miner in Awesomeminer curl -i -d POST http://[IP_AWESOMEMINER_MAIN_PC]:17790/api/miners/[MINERID]?action=start #start main miner in Awesomeminer(miniZ,Gminer,lolminer etc) MinerID can found in Awesomeminer summary tab Example: start.bat curl -i -d POST http://192.168.2.113:17790/api/miners/37?action=stop curl -i -d POST http://192.168.2.113:17790/api/miners/48?action=start stop.bat curl -i -d POST http://192.168.2.113:17790/api/miners/48?action=stop curl -i -d POST http://192.168.2.113:17790/api/miners/37?action=start Another way where you only need one miner in Awesomemine, is to change the template via API. If needed i make a documentation. I am sure, now there are so many ways. Find your own way or ask me [IMG] If your windows doesn´t have curl, then you find it online as portable version. Tested All versions are tested for 24 hours before release. FAQ I use HIVE OS. My Command Prompt screen no longer crashed/stopped doing anything. This is an issue with Command Prompt. Right click at the top of the command prompt, choose Properties, Disable Quick Edit. To permanently fix this, choose Default instead of Properties then Disable Quick Edit. My miner is not on the list. This project is a work in progress. If you do not see your miner of choice, please create an issue here and I will quickly add support for it. Are there any fees to use this? There are no fees attached. Can I donate? Sure BTC: 347DrMsEhPaxVQjvrYFRoiAHb5NQoNGV7R ETH: 0x374817E3F8adDBa6A03B7872f7CBeD0ce8C6AE8E ZIL: 0xe511b07b68681d4501665De40cf6A734f05da94f Version Changes in version: v1.1.1 December 7.2019 Added support for SeroMiner v1.1.0 December 2.2019 Added Logging v1.0.7 November 22.2019 Fixed bug that would stop program over a long period of time. v1.0.6 October 27.2019 Bug Fixes Removed -coin from config file v1 October 22.2019 New command line options Backward Compatibility with older options Fixes to stopping miners Added Custom Script option 0.9.3.6 September 20.2019 Minor Fixes 0.9.3.5 September 07.2019 Added T-Rex Miner Minor Fixes 0.9.3.4 August 16.2019 Major Bug Fixes Better POW Checks 0.9.3.3 August 13.2019 Upgrade Stratum Version. Added Sooner DAG Creation 0.9.3.1 August 02.2019 Change Stratum Version. Facilitates how long Claymore Miner takes to start. 0.9.1 July 30.2019 Upgraded to Stratum Basic and added better timings. 0.9 July 26.2019 More retry times to find miner process. Users have said that there should be retries to find process if process is slow. 0.8.3 July 18.2019 Zilliqa Blocktime has changed. I have made a fix to permanently solve this issue. No matter what Zilliqa does with the blocktime, the script should function properly.. 0.8.2 July 16.2019 Fixed Pow Timings. 0.8.0 July 14.2019 Added Support to use MinerStat (Please see instructions above to use properly) Added Support to use LOLMiner Claymore and Phoenix now uses your config.txt Fixes for CCminer 0.7.0 July 11.2019 Added Support to use Claymore Miner to Mine Zilliqa 0.6.0 July 2.2019 Added Support to use Phoenix Miner to Mine Zilliqa Added more Files in package for newer users 0.5.4 Jun 30.2019 Minor Fixes 0.5 Jun 26.2019 Added NiceHashMinerLegacy, CCminer, TT-Miner, ewbf_144, NBminer, Team Red Miner, Xmr-Stak 0.4.4.1 Jun 24.2019 Minor Fix 0.4.4 Jun 24.2019 Optimized Timings for POW Report Hashrate by default 0.4.3 Jun 23.2019 Minor Fixes More Information Shown in Command Screen and Better Error handling 0.4.2 Jun 22.2019 Minor Fixes 0.4.1 Jun 20.2019 Added Option to name your miner in Command Line 0.4 Jun.20.2019 Added GMiner Support Added Command Line Version 0.3 Jun.18.2019 Minor Fix to API Connection 0.2 Jun.17.2019 Added support for Bminer and Sgminer Better communication to Zilliqa API Fix minor issues poslano v temi :: [ANN] Zilliqa Auto Switcher. Auto Mine ZIL, 0% Fees, HIVE + SMOS + more
Official Release
rhminer is an optimized miner for RandomHash2 POW algo used by PascalCoin Features: Support Intel/AMD 64 bit CPU. Support stratum and solo mining Provide simple api. Works on Windows 7,10 and Ubuntu 18, MacOS. Pool vs Solo mining Since solo mining is 45% faster than pool mining, It is best to mine locally at the moment. Pool mining is supported but no pool exists as of now. Tested on CPU: I3, I5, Core2, Xeon, Athlon Links: Download Windows binaries on Mega https://mega.nz/#F!cChVXCLK!iEC9n_bugWbL0s7YrojR7A History Version 2.1 - 22 Jan 2020 * Optimized RandomHash2 with up to 80% more speed. (On some system rhminer 2.1 is up to 250% faster than official miner) * Fixed linux binary where main thread was exiting after miner startup. * Linux zip files now contain rhminer as an executable and not a simple file. * FIxed windows packages and removed extra folders Version 2.0 - Jan 17 2020 * Added support for RandomHash2 * Dropped support for GPU Version 1.5.3 - Jul 8 2019 * Added MacOS support and binaries. (Tested on High Sierra and El Capitan) * Added internal cpu throttling option to slow down mining. * Fixed: Duplicate shares when pool mining. * Fixed: EthMan API : sent config.txt was ignored when restarting miner on Linux. Version 1.5.1 - 14 may 2019 * Support for CUDA 10.1 with drivers 419.x(Windows) and 418.x(Linux) * Added support for Nvidia Turing architecture (GTX 20xx) Untested. * Fixed : Cannot Disable gpu mining when using config.txt with gpu binaries. * Now you can simply empty the value of "gpu" and "gputhreads" to disable gpu mining on gpu binaries. Ex: "gpu":"" and "gputhreads":"" * Little performance boost on linux binaries (CPU and GPU) * Added missing screensaver source files * change line ending in many files Version 1.5 - 2 April 2019 * Added ETHman and AwesomeMiner support (miner_getstat1, miner_restart, miner_reboot, miner_file, control_gpu) It is strongly recommented to NOT put rhminer in a loop in a script if you intend to use EthMan or AwseomeMiner. The restart option will close the instance and restart a new one. So if rhminer is in a loop, it will start another new instance every time. * Added Pascal Coin ScreenSaver V1.0 - Windows * Now starting rhminer without parameters will automatically use config.txt. * Added support Maxwell architecture 5.3 (Tegra Tegra (Jetson) TX1 / Tegra X1) on windows * Re-added Pascal architecture 6.0 (Quadro GP100, Tesla P100, DGX-1) that was mistakenly removed in 1.4 * Re-added Pascal architecture 6.2 ( Integrated GPU on the NVIDIA Drive PX2, Tegra (Jetson) TX2) that was mistakenly removed in 1.4 Version 1.4 - 3 march 2019 *Major gpu optimizations: Gtx 1060 3gb 280 threads +196% Gtx 1070 8gb 384 threads +218% gtx 950 2gb 140 threads +226% [linux] * Fix : On linux, rhminer stall for ever when network is lost (cable unplug or switch/router crashes). * Fix : On very rare occasions, rhminer would stall at startup. * Fix : Opensource pool bug where work-ID stuck to the same ID, creating many invalid shares. * Fix : Duplicate/stale shares was high on cpu with with core count. * Add -configfile option with a config.xml example * Add extra option (+) to -cputhreads to enable mining on more threads that system's core/hyperthreads count (ex: on a i5 with 4 core -threadcount +7 will mine on 7 threads instead of 4) Version 1.3 - 11 Jan 2019 *Major CPU optimizations. Up to 260% on some CPU * +155% on Xeon E52665 * +260% on Intel i5 2th gen * +195% on Intel i5 4th gen * +250% on Intel Core 2 * New commandline option -sseboost. This option will give up to 10% on some cpu. BUT can also make it slower on other. TEST it before using it, to assert it gives a boost to your cpu. Version 1.2 - 13 dec 2018 * Major optimization on cuda miner (+32% on gtx 1070 8gb, +37% on gtx 1060 3gb, +40% on gtx 950) * Simple optimization on Linux. Up to 5% depending on the cpu Version 1.0 - 30 Nov 2018 * Fixed network error with coinotron and f2pool where miner was in limbo after pool disconnected. * Fixed miner not starting on cpu without SSe4.1 * Fixed error where miners was rejecting shares due to wrong work package data. * Fixed 'Exit on too many rejected shares' that was not working properly * Added SSe detection * Fixed connection error when coinotron and f2pool randomly closing socket. * Minor memory optimizations Dev donations: Default donation is 1%. Donation is hard-coded in the binaries downloadable on gitgub. To disable donation download and compile locally, then use the -disabledevfee option. poslano v temi :: [ANN] rhminer - an optimized CPU+GPU miner for PascalCoin
SRBMiner-MULTI CPU & AMD GPU Miner 0.3.1
Windows & Linux ------------------------------------------------------------------------------------------------------ Download links: https://mega.nz/#F!MHJiHIwS!Kky4RrnuX-7Oq_3a5UzrWw =========================================== SUPPORTED ALGORITHMS: =========================================== [CPU ONLY] + cpupower + defyx + m7mv2 + randomarq + randomsfx + randomwow + randomx + randomxl + yescryptr16 + yescryptr32 + yescryptr8 + yespower + yespower2b + yespoweric + yespoweriots + yespoweritc + yespowerlitb + yespowerltncg + yespowerr16 + yespowersugar + yespowerurx [CPU & GPU] + blake2b + blake2s + cryptonight_catalans + cryptonight_talleo + eaglesong + k12 + kadena + keccak + mtp + rainforestv2 + yescrypt Note: MTP scratchpad creation is very slow at the moment, it is waiting on a big rewrite. This has an impact on poolside hashrate if a lot of new works are sent out. =========================================== SUPPORTED GPU'S: =========================================== + VEGA 56/64/FE/VII + RX 460/470/480/550/560/570/580/590 + R9 285/285X/380/380X + R9 290/290X + R9 Fury/Nano Linux : amdgpu-pro drivers =========================================== FEES: =========================================== 0.00% + blake2b + yespowerurx ~0.85% + Rest =========================================== FEATURES: =========================================== + Guided setup mode + Algorithm switching capability without external application + Run in background without a window + Hashrate watchdog that restarts miner on GPU error + Monitoring of GPU temperature, and auto turn off if temperature is too high + System shutdown on too high GPU temperature + Miner auto restart on too many rejected shares + Startup monitor which ensures your miner starts working normally + API for miner statistics + Web based GUI interface for miner statistics + Multiple pools with failover support + Add new pools on the fly without restarting miner + Difficulty monitor, reconnects to pool if difficulty is too high + Job timeout monitor, reconnects to pool if no job received for a long time + Switch AMD video cards to compute mode easily =========================================== USAGE EXAMPLES =========================================== 1. Disable CPU mining, use only GPU mining Code: SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-cpu 2. Run miner in background without console window, with API enabled on port 17644 (http://127.0.0.1:17644) Code: SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --background --api-enable --api-port 17644 3. Disable GPU mining, use 7 CPU threads with extended logging enabled and saved to Logslog.txt file Code: SRBMiner-MULTI.exe --algorithm keccak --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 7 --log-file Logslog.txt --extended-log 4. Full example for CPU & GPU mining set only from cmd (4 GPU/s used and 7 CPU threads on K12 algorithm) Code: SRBMiner-MULTI.exe --algorithm k12 --gpu-id 0,1,2,3 --gpu-intensity 26,25,26,26 --gpu-worksize 256,256,256,256 --gpu-threads 1,1,1,1 --cpu-threads 7 --pool your-pool-here --wallet your-wallet-here 5. Disable GPU mining, use 15 CPU threads with extended logging enabled and saved to Logslog.txt file, start mining Randomx from block height 1978433 and run miner in background Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --disable-gpu --cpu-threads 15 --log-file Logslog.txt --extended-log --background --start-block-height 1978433 =========================================== CPU MINING SETUP =========================================== If you don't set the --cpu-threads or --cpu-affinity parameters, miner will try to automatically find the best setup for you system. Sometimes the auto setup won't find the optimal settings so you should find it by experimenting. You need to set the number of worker threads (--cpu-threads) and bind them to the appropriate PU (processing unit) with --cpu-affinity. Examples to get you started: 4 CORE / 8 THREADS CPU : 1. Use 4 threads, 1 on every core : --cpu-threads 4 --cpu-affinity 0x55 2. Use 8 threads, 2 on every core : --cpu-threads 8 --cpu-affinity 0xFF 6 CORE / 12 THREADS CPU : 1. Use 6 threads, 1 on every core : --cpu-threads 6 --cpu-affinity 0x555 2. Use 12 threads, 2 on every core : --cpu-threads 12 --cpu-affinity 0xFFF =========================================== RANDOMX EXTRA TWEAKS =========================================== To enjoy the benefits of the increased hashrate: 1. Miner must run with administrator privileges [right click on SRBMiner-MULTI.exe->properties->compatibility-> check 'Run this program as an administrator' option-> click OK button 2. Make sure WinRing0x64.sys is in the same folder as SRBMiner-MULTI.exe Enabling the extra tweaks, some register values are changed which will revert back to the original value after a computer restart. If miner starts crashing, or creates bad results after enabling the extra tweaks, you can try the '--randomx-use-tweaks' parameter, where you can define which tweak/s you want to enable. Without this option miner enables all available tweaks (same as --randomx-use-tweaks 0123 for AMD, --randomx-use-tweaks 0 for Intel) , but with '--randomx-use-tweaks' you can define which ones you want to use. There are at the moment : Intel - 1 tweak Amd - 5 tweaks Index starts from 0, so you have 0 1 2 3 4 for options on AMD. Here's an example : + Use tweaks number 0 and 3 (dont use 1 and 2) Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 03 The order of tweaks doesn't matter, so writing 03 is same as 30. What you should do is to find which tweak, or combination of tweaks, makes the problems. You should try enabling tweaks one by one, and test to see if miner runs stable with one tweak, and if it does, test the next one etc. Luckily there are not so many combinations for you try (because 0123 is for example same as 3021 or 1302.. ) So start with : Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 0 If it runs without crashing for some time, try the next one : Code: SRBMiner-MULTI.exe --algorithm randomx --pool your-pool-here --wallet your-wallet-here --password your-password-here --randomx-use-tweaks 1 and so on, until you find the one that makes the trouble. Then try combining tweaks to find a combination that works for you. If you have older gen. Ryzens, try this combination of tweaks : Code: --randomx-use-tweaks 0134 =========================================== INFORMATIONS =========================================== SRBMiner-Multi is supported by Awesome Miner If you get "Insufficient system resources available to allocate X kB in large-page memory" message, that means you dont have enough FREE memory left, a computer restart should solve this. Large-page memory regions may be difficult to obtain after the system has been running for a long time because the physical space for each large page must be contiguous, but the memory may have become fragmented. If you still get this message even after restarting, try increasing virtual memory. You can find all the parameters and everything you need to get going in the readme.txt file. This thread is self moderated, because in the previous SRBMiner thread there was too much spam and garbage, which wasn't removed by the forum moderators. Update infos : V0.3.1 + Fixed ERROR 0x4002 V0.3.0 + First version for Linux (Tested on Ubuntu 18.04) + Removed RandomV (MoneroV) algorithm + Added 'defyx' algorithm (Scala) + Added 'yespoweritc' algorithm (Intercoin) + Added 'cryptonight_catalans' algorithm (CatalansCoin) + Added 'cryptonight_talleo' algorithm (Talleo) + --randomx-use-tweaks accepts now values from 0-4, [ 0 - Intel, 0,1,2,3,4 - AMD ] + Added parameter 'worker' to pools config and cmd parameters -> defines worker name for RPC2 + a lot of bug fixes V0.2.0 + Added RandomV algorithm (MoneroV) + Added --randomx-use-tweaks , to select the MSR tweak/s to apply + Added RandomX tweak support for Intel Core2 processors V0.1.9 beta + Added RandomSFX algorithm (SafexCash) + RandomX algorithm/s improvements + Added RandomX algorithm/s extra tweak that can increase hashrate + Added parameter --disable-randomx-tweaks + Fixed K12 algorithm + --cpu-priority now affects main process too (not just worker threads) + default --cpu-priority is now 2 (below normal) + bug fixes + added license text to readme for RandomX and WinRing0 V0.1.8 beta + Added Kadena algorithm (pool mining only) + Added yespoweric algorithm (IsotopeC) + Added yespoweriots algorithm (IOTScoin) + Added yespower2b AVX support + Fixed nicehash protocol compatibility with rpc2 + Miner now won't quit if not enough free RAM for an algorithm, it will just warn the user V0.1.7 beta + Added 'm7mv2' algorithm (Magi coin - XMG) + Cpu auto configuration should be better than on previous versions + Added CPU data to API, also rearranged a few things in API + Console window 'Quick Edit' mode disabled on miner start, so users won't accidentally pause miner by clicking in the console window V0.1.6 beta + Fixed threads binding on systems with more than 1 numa node + Better auto configuration for cpu mining + Previous two fixes should bring higher hashrates + Added pool controlled algorithm switching capability (Monero Ocean) + Added pool config parameter "algo_min_time" and --algo-min-time to cli (Monero Ocean) + Added pool config parameter "keepalive" and --keepalive to cli V0.1.5 beta + Added cpu algorithms : RandomX, RandomXL, RandomWow, RandomArq + Added cli parameters: --cpu-priority, --disable-huge-pages, --disable-hw-aes, --disable-numa + Added pool config parameter 'start_block_height' and --start-block-height cli parameter + Fixed a bug that limited the number of threads useable for cpu mining + Fixed cpu affinity parameter and thread/s binding to affinity mask + Where possible, now using huge pages if available, this should bring a slight performance increase + Removed OpenCL dependency if using only cpu miner + Added limited Overdrive8 support (adl type 3) V0.1.4 beta + Fixed a critical bug with work creation for fast algorithms [k12, keccak] V0.1.3 beta + Keccak algorithm +15% faster on gpu + K12 algorithm +8-12% faster on gpu [vega56 ~1700mhs] + Guided setup got smarter a little bit V0.1.2 beta + Added support for kangaroo12 algo [k12] + All algorithms that have a fee now have the same ~0.85% devfee + More bug fixes V0.1.1 beta +Added yespowerltncg, yespowersugar, yespowerurx, yespower2b, eaglesong (nervos-ckb) algorithms +Added support for SHA with yespower algorithm family +Bug fixes poslano v temi :: SRBMiner-MULTI CPU & AMD GPU Miner 0.3.1 Win & Linux |
Added support for AMD RX5500 cards
Added support for the latest AMD Windows drivers 19.12.3
Adding support for AMD Linux drivers 19.50-967956
Adding option -rate 2 to use the command name "eth_submitHashRate" instead of "eth_submitHashrate" when solo mining
Fixed the problem with loading NVML with the latest Nvidia drivers
Fixed a problem that was introduced in 4.8c causing mismatching of the cards when using more than one value in -cclock or any other command-line argument with more than one value (i.e. when using different values for each card)
Added an HTML version of the documentation for better navigation and readability
Other small improvements and fixes.
You can download PhoenixMiner 4.9c from here:
https://mega.nz/#F!QSAVVaoS!bCFZeeUzKdvMudrY4zFWog
Screenshot:
Changes in version 4.8c:
Added support for the latest AMD drivers under Linux 19.30-934563 and for mining with RX5700 cards under Linux. Note that drivers are quite buggy and most of the overclocking options don't work, as well as most of the hardware monitoring options.
Added a new flexible way for setting GPU-specific options with selectors. Example: -cclock 1-3:1090,4:1300 -mclock nvidia:+450,amd:2000,*:1900,gtx*1070*ti:+200 See Readme.txt for more information.
Added command-line option -gbase to set 0-base or 1-based GPU indexes (the default is 1). With -gbase 1 (the default), the first GPU is GPU1, then GPU2, etc. With -gbase 0 the first GPU is GPU0, second - GPU1, etc. Note that this also changes the indexes that are used with all command line options that accept GPU indexes (e.g. -gpus) as well as these used with the interactive commands on the miner shell window
Validated support for the latest AMD Windows drivers 19.11.3 (but they already work with 4.7c because there were no significant changes in the OpenCL driver)
Other small improvements and fixes.
PhoenixMiner is fast (arguably the fastest) Ethash (ETH, ETC, Muiscoin, EXP, UBQ, etc.) miner that supports
both AMD and Nvidia cards (including in mixed mining rigs). It runs under Windows x64 and Linux x64
and has a developer fee of 0.65% (the lowest in the industry). This means that every 90
minutes the miner will mine for us, its developers, for 35 seconds.
PhoenixMiner also supports Ubqhash for mining UBQ, ProgPOW for mining BCI, and dual mining
Ethash/Ubqhash with Blake2s.
The speed is generally faster than Claymore's Ethereum miner in eth only mode
(we have measured about 0.4-1.3% speed improvement but your results may be slightly lower or
higher depending on the GPUs). To achieve highest possible speed on AMD cards it may be needed
to manually adjust the GPU tune factor (a number from 8 to about 400, which can be changed
interactively with the + and - keys while the miner is running).
If you have used Claymore's Dual Ethereum miner, you can switch to PhoenixMiner with
minimal hassle as we support most of Claymore's command-line options and confirguration
files.
Please note that PhoenixMiner is extensively tested on many mining rigs but there still may be some bugs.
Additionally, we are actively working on bringing many new features in the future releases.
If you encounter any problems or have feature requests, please post them here (in this thread).
We will do our best to answer in timely fashion.
1. Quick start
You can download PhoenixMiner 4.9c from here:
https://mega.nz/#F!QSAVVaoS!bCFZeeUzKdvMudrY4zFWog (MEGA)
Examples of settings for different pools.
ethermine org (ETH):
PhoenixMiner.exe -pool eu1 ethermine org:4444 -pool2 us1 ethermine org:4444 -wal YourEthWalletAddress.WorkerName -proto 3
ethermine org (ETH, secure connection):
PhoenixMiner.exe -pool ssl: //eu1 ethermine org: 5555 -pool2 ssl: //us1 ethermine org: 5555 -wal YourEthWalletAddress.WorkerName -proto 3
ethpool org (ETH):
PhoenixMiner.exe -pool eu1 ethpool org:3333 -pool2 us1 ethpool org:3333 -wal YourEthWalletAddress.WorkerName -proto 3
dwarfpool com (ETH):
PhoenixMiner.exe -pool eth-eu dwarfpool com:8008 -wal YourEthWalletAddress / WorkerName -pass x
nanopool org (ETH):
PhoenixMiner.exe -pool eu1 nanopool org:9999 -wal YourEthWalletAddress / WorkerName -pass x
nicehash (ethash):
PhoenixMiner.exe -pool stratum + tcp: //daggerhashimoto eu nicehash com: 3353 -wal YourBtcWalletAddress -pass x -proto 4 -stales 0
f2pool (ETH):
PhoenixMiner.exe -epool eth f2pool com:8008 -ewal YourEthWalletAddress -pass x -worker WorkerName
miningpoolhub (ETH):
PhoenixMiner.exe -pool us-east ethash-hub miningpoolhub com:20535 -wal YourLoginName.WorkerName -pass x -proto 1
coinotron com (ETH):
PhoenixMiner.exe -pool coinotron com:3344 -wal YourLoginName.WorkerName -pass x -proto 1
ethermine org (ETC):
PhoenixMiner.exe -pool eu1-etc ethermine org:4444 -wal YourEtcWalletAddress.WorkerName
dwarfpool com (EXP):
PhoenixMiner.exe -pool exp-eu dwarfpool com:8018 -wal YourExpWalletAddress / WorkerName
miningpoolhub (MUSIC):
PhoenixMiner.exe -pool europe ethash-hub miningpoolhub com:20585 -wal YourLoginName.WorkerName -pass x -proto 1
ubiqpool (UBIQ):
PhoenixMiner.exe -pool stratum + tcp: //eu ubiqpool io: 8008 -wal YourUbiqWalletAddress -pass x -worker WorkerName
minerpool net (PIRL):
PhoenixMiner.exe -pool pirl minerpool net:8002 -wal YourPirlWalletAddress -pass x -worker WorkerName
dodopool com (Metaverse ETP):
PhoenixMiner.exe -pool etp dodopool com:8008 -wal YourMetaverseETPWalletAddress -worker Rig1 -pass
minerpool net (Ellaism):
PhoenixMiner.exe -pool ella minerpool net:8002 -wal YourEllaismWalletAddress -worker Rig1 -pass x
Pool options:
3. Command-line arguments
Note that PhoenixMiner supports most of the command-line options of Claymore's dual Ethereum miner
so you can use the same command line options as the ones you would have used with Claymore's miner.
-pool <host rt> Ethash pool address (prepend the host name with ssl:// for SSL pool, or http:// for solo mining)
-wal <wallet> Ethash wallet (some pools require appending of user name and/or worker)
-pass <password> Ethash password (most pools don't require it, use 'x' as password if unsure)
-worker <name> Ethash worker name (most pools accept it as part of wallet)
-proto <n> Selects the kind of stratum protocol for the ethash pool:
1: miner-proxy stratum spec (e.g. coinotron)
2: eth-proxy (e.g. dwarfpool, nanopool) - this is the default, works for most pools
3: qtminer (e.g. ethpool)
4: EthereumStratum/1.0.0 (e.g. nicehash)
5: EthereumStratum/2.0.0
-coin <coin> Ethash coin to use for devfee to avoid switching DAGs:
auto: Try to determine from the pool address (default)
eth: Ethereum
etc: Ethereum Classic
exp: Expanse
music: Musicoin
ubq: UBIQ
pirl: Pirl
ella: Ellaism
etp: Metaverse ETP
pgc: Pegascoin
akroma: Akroma
whale: WhaleCoin
vic: Victorium
nuko: Nekonium
mix: Mix
egem: EtherGem
aura: Aura
hbc: Hotelbyte Coin
gen: Genom
etz: EtherZero
clo: Callisto
dbix: DubaiCoin
moac: MOAC
etho: Ether-1
etcc: EtherCC
yoc: Yocoin
b2g: Bitcoiin2Gen
esn: Ethersocial
ath: Atheios
reosc: REOSC
4. Configuration files
Note that PhoenixMiner supports the same configuration files as Claymore's dual Ethereum miner
so you can use your existing configuration files without any changes.
Instead of using command-line options, you can also control PhoenixMiner with configuration
files. If you run PhoenixMiner.exe without any options, it will search for the file config.txt
in the current directory and will read its command-line options from it. If you want, you can
use file with another name by specifying its name as the only command-line option
when running PhoenixMiner.exe.
You will find an example config.txt file in the PhoenixMiner's directory.
Instead of specifying the pool(s) directly on the command line, you can use another configuration
file for this, named epools.txt. There you can specify one pool per line (you will find an example
epools.txt file in the PhoenixMiner's directory).
For the dual mining pools, you can use the dpools.txt file, which has the same format as epools.txt
but for the secondary coin. You will find an example epools.txt file in the PhoenixMiner's directory.
Note that unlike the epools.txt, which is loaded each time when the miner starts, the dpools.txt file
is only read if you specify a dual mining pool on the command line with -dpool, or at least add
the -dcoin blake2s command-line option.
The advantages of using config.txt and epools.txt/dpools.txt files are:
- If you have multiple rigs, you can copy and paste all settings with these files
- If you control your rigs via remote control, you can change pools and even the miner options by
uploading new epools.txt files to the miner, or by uploading new config.txt file and restarting
the miner.
5. Remote monitoring and management
Phoenix miner is fully compatible with Claymore's dual miner protocol for remote monitoring and
management. This means that you can use any tools that are build to support Claymore's dual miner,
including the "Remote manager" application that is part of Claymore's dual miner package.
We are working on much more powerful and secure remote monitoring and control functionality and
control center application, which will allow better control over your remote or local rigs and some
unique features to increase your mining profits.
poslano v temi :: PhoenixMiner 4.9c: fastest Ethereum/Ethash miner with lowest devfee (Win/Linux)